Topic: Socket connect failed: Connection refused (Read 199 times)

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197240K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32136K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 19096K (cc85b000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 17/7, WL threshold: 4096, image sequence number: 1841167953
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 521F9D24-545E-4D8A-AD10-C9780DBC570F, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4413/2238, WL threshold: 4096, image sequence number: 1210369717
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B34410AB-B353-4026-A14A-AC6269444EC4, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab00d
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
 [2022-04-13 23:47:50.453] start listen on 6060 ...
2022-04-13 23:47:20 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2022-04-13 23:47:20 driver-btm-soc.c:8125:bitmain_soc_init: T15
2022-04-13 23:47:20 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2022-04-13 23:47:20 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2022-04-13 23:47:20 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2022-04-13 23:47:20 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2022-04-13 23:47:20 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2022-04-13 23:47:20 driver-btm-soc.c:7729:_show_pool_info: Pool[0]: url = stratum+tcp://us-east.stratum.slushpool.com:3333, user = t15.worker
2022-04-13 23:47:20 driver-btm-soc.c:7729:_show_pool_info: Pool[1]: url = stratum+tcp://btc.f2pool.com:1314, user = t15
2022-04-13 23:47:20 driver-btm-soc.c:7729:_show_pool_info: Pool[2]: url = , user =
2022-04-13 23:47:20 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2022-04-13 23:47:20 driver-btm-soc.c:8150:bitmain_soc_init: Miner compile time: Tue Aug 20 14:15:07 CST 2019 type: Antminer T15
2022-04-13 23:47:20 driver-btm-soc.c:8152:bitmain_soc_init: last commit version: a824717 commit time: 2019-08-02 14:19:26 build: 2019-08-20 14:25:02
2022-04-13 23:47:20 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2022-04-13 23:47:22 driver-btm-soc.c:8215:bitmain_soc_init: miner ID : 8114ac282b104814
2022-04-13 23:47:22 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB00D
2022-04-13 23:47:22 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7
2022-04-13 23:47:22 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2022-04-13 23:47:22 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2022-04-13 23:47:22 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2022-04-13 23:47:25 eeprom.c:1409:eeprom_load: eeprom load chain [0]
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7f b4 5a 5a 5a 5a 5a 5a   5a 5a 5a 5a 5a 5a 5a 5a
00000010 5a 5a 5a 5a 5a 5a 5a 5a   5a 5a 5a 5a 5a 5a 5a 5a
00000020 5a 5a 5a 5a 5a 5a 5a 5a   5a 5a 5a 5a 5a 5a 5a 5a
00000030 5a 5a 5a 5a 5a 5a 5a 5a   5a 5a 5a 5a 5a 5a ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff 96 1a
00000070 00 00 ff ff ff ff ff ff   ff 00 04 0b 00 0f 00 2d
00000080 00 2d 00 ff ff ff ff c4   66 66 66 66 66 66 66 66
00000090 66 66 66 66 66 66 66 66   66 66 66 66 66 66 66 66
000000a0 66 66 66 66 66 66 66 66   66 66 66 66 66 66 66 66
000000b0 66 66 66 66 66 66 66 66   66 66 66 66 66 66 66 66
000000c0 66 66 66 66 ff ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 68 1e 00 00   ff ff 01 01 01 00 dc 48
2022-04-13 23:47:27 eeprom.c:1409:eeprom_load: eeprom load chain [1]
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7f b0 55 58 58 55 52 52   55 55 58 58 55 58 58 55
00000010 52 52 55 58 55 58 58 55   55 58 52 55 58 52 58 55
00000020 58 58 55 52 55 52 55 58   55 58 58 58 55 55 52 55
00000030 55 58 52 58 58 55 58 55   52 52 55 58 58 55 ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff 7f 19
00000070 00 00 ff ff ff ff ff ff   ff 00 04 0b 00 0f 00 2d
00000080 00 2d 00 ff ff ff ff be   64 67 67 67 61 61 67 64
00000090 67 67 67 67 67 64 61 61   67 67 67 64 67 64 67 67
000000a0 61 64 67 61 67 67 67 67   67 61 64 61 67 67 64 67
000000b0 67 67 67 64 61 61 64 67   67 67 67 64 67 67 61 61
000000c0 64 67 67 67 ff ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 31 1e 00 00   ff ff 01 01 01 00 50 81
2022-04-13 23:47:30 eeprom.c:1409:eeprom_load: eeprom load chain [2]
         00 01 02 03 04 05 06 07   08 09 0A 0B 0C 0D 0E 0F
00000000 7f b0 55 55 52 52 55 52   55 52 55 55 52 55 55 55
00000010 52 52 55 52 55 55 55 52   55 52 55 52 55 52 55 55
00000020 52 55 55 55 52 52 52 55   55 55 55 55 52 55 52 52
00000030 52 55 55 55 55 55 52 55   52 55 52 52 55 55 ff ff
00000040 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000050 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
00000060 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff f0 18
00000070 00 00 ff ff ff ff ff ff   ff 00 04 0b 00 0f 00 2d
00000080 00 2d 00 ff ff ff ff be   64 64 61 61 64 61 64 61
00000090 64 64 61 64 64 64 61 61   64 61 64 64 64 61 64 61
000000a0 64 61 61 64 64 64 61 64   64 64 61 61 61 64 64 64
000000b0 64 64 61 64 61 61 61 64   64 64 64 64 61 64 61 64
000000c0 61 61 64 64 ff ff ff ff   ff ff ff ff ff ff ff ff
000000d0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000e0 ff ff ff ff ff ff ff ff   ff ff ff ff ff ff ff ff
000000f0 ff ff ff ff 89 1d 00 00   ff ff 01 01 01 00 57 fe
2022-04-13 23:47:30 eeprom.c:1418:eeprom_load: done
2022-04-13 23:47:30 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2022-04-13 23:47:30 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2022-04-13 23:47:30 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101
2022-04-13 23:47:30 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100
2022-04-13 23:47:30 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101
2022-04-13 23:47:30 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100
2022-04-13 23:47:31 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2022-04-13 23:47:35 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2022-04-13 23:47:36 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2022-04-13 23:47:40 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2022-04-13 23:47:41 dspic33ep16gs202.c:538:reset_pic: chain[2] ok
2022-04-13 23:47:45 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok
2022-04-13 23:47:45 power.c:137:power_init: power init ...
2022-04-13 23:47:45 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2
2022-04-13 23:47:45 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1
2022-04-13 23:47:45 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2022-04-13 23:47:48 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-13 23:47:48 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2022-04-13 23:47:49 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2022-04-13 23:47:52 driver-btm-soc.c:8242:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2022-04-13 23:48:22 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 19.800000
2022-04-13 23:48:22 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 19.500000
2022-04-13 23:48:22 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 19.500000
2022-04-13 23:48:22 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 19.80, min = 19.50
2022-04-13 23:48:22 power.c:149:set_working_voltage: working_voltage = 19.500000
2022-04-13 23:48:22 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-13 23:48:22 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-13 23:48:22 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:450 IC[001]:450 IC[002]:450 IC[003]:450 IC[004]:450
IC[005]:450 IC[006]:450 IC[007]:450 IC[008]:450 IC[009]:450
IC[010]:450 IC[011]:450 IC[012]:450 IC[013]:450 IC[014]:450
IC[015]:450 IC[016]:450 IC[017]:450 IC[018]:450 IC[019]:450
IC[020]:450 IC[021]:450 IC[022]:450 IC[023]:450 IC[024]:450
IC[025]:450 IC[026]:450 IC[027]:450 IC[028]:450 IC[029]:450
IC[030]:450 IC[031]:450 IC[032]:450 IC[033]:450 IC[034]:450
IC[035]:450 IC[036]:450 IC[037]:450 IC[038]:450 IC[039]:450
IC[040]:450 IC[041]:450 IC[042]:450 IC[043]:450 IC[044]:450
IC[045]:450 IC[046]:450 IC[047]:450 IC[048]:450 IC[049]:450
IC[050]:450 IC[051]:450 IC[052]:450 IC[053]:450 IC[054]:450
IC[055]:450 IC[056]:450 IC[057]:450 IC[058]:450 IC[059]:450
voltage: 19.00 V
hash rate: 06806 GH/s

freq data per ASIC in mode2:
IC[000]:510 IC[001]:510 IC[002]:510 IC[003]:510 IC[004]:510
IC[005]:510 IC[006]:510 IC[007]:510 IC[008]:510 IC[009]:510
IC[010]:510 IC[011]:510 IC[012]:510 IC[013]:510 IC[014]:510
IC[015]:510 IC[016]:510 IC[017]:510 IC[018]:510 IC[019]:510
IC[020]:510 IC[021]:510 IC[022]:510 IC[023]:510 IC[024]:510
IC[025]:510 IC[026]:510 IC[027]:510 IC[028]:510 IC[029]:510
IC[030]:510 IC[031]:510 IC[032]:510 IC[033]:510 IC[034]:510
IC[035]:510 IC[036]:510 IC[037]:510 IC[038]:510 IC[039]:510
IC[040]:510 IC[041]:510 IC[042]:510 IC[043]:510 IC[044]:510
IC[045]:510 IC[046]:510 IC[047]:510 IC[048]:510 IC[049]:510
IC[050]:510 IC[051]:510 IC[052]:510 IC[053]:510 IC[054]:510
IC[055]:510 IC[056]:510 IC[057]:510 IC[058]:510 IC[059]:510
voltage in mode2: 19.80 V
hash rate in mode2: 07784 GH/s

2022-04-13 23:48:22 eeprom.c:840:travel_eeprom_store: chain[1] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:425 IC[001]:440 IC[002]:440 IC[003]:425 IC[004]:410
IC[005]:410 IC[006]:425 IC[007]:425 IC[008]:440 IC[009]:440
IC[010]:425 IC[011]:440 IC[012]:440 IC[013]:425 IC[014]:410
IC[015]:410 IC[016]:425 IC[017]:440 IC[018]:425 IC[019]:440
IC[020]:440 IC[021]:425 IC[022]:425 IC[023]:440 IC[024]:410
IC[025]:425 IC[026]:440 IC[027]:410 IC[028]:440 IC[029]:425
IC[030]:440 IC[031]:440 IC[032]:425 IC[033]:410 IC[034]:425
IC[035]:410 IC[036]:425 IC[037]:440 IC[038]:425 IC[039]:440
IC[040]:440 IC[041]:440 IC[042]:425 IC[043]:425 IC[044]:410
IC[045]:425 IC[046]:425 IC[047]:440 IC[048]:410 IC[049]:440
IC[050]:440 IC[051]:425 IC[052]:440 IC[053]:425 IC[054]:410
IC[055]:410 IC[056]:425 IC[057]:440 IC[058]:440 IC[059]:425
voltage: 18.80 V
hash rate: 06527 GH/s

freq data per ASIC in mode2:
IC[000]:500 IC[001]:515 IC[002]:515 IC[003]:515 IC[004]:485
IC[005]:485 IC[006]:515 IC[007]:500 IC[008]:515 IC[009]:515
IC[010]:515 IC[011]:515 IC[012]:515 IC[013]:500 IC[014]:485
IC[015]:485 IC[016]:515 IC[017]:515 IC[018]:515 IC[019]:500
IC[020]:515 IC[021]:500 IC[022]:515 IC[023]:515 IC[024]:485
IC[025]:500 IC[026]:515 IC[027]:485 IC[028]:515 IC[029]:515
IC[030]:515 IC[031]:515 IC[032]:515 IC[033]:485 IC[034]:500
IC[035]:485 IC[036]:515 IC[037]:515 IC[038]:500 IC[039]:515
IC[040]:515 IC[041]:515 IC[042]:515 IC[043]:500 IC[044]:485
IC[045]:485 IC[046]:500 IC[047]:515 IC[048]:515 IC[049]:515
IC[050]:515 IC[051]:500 IC[052]:515 IC[053]:515 IC[054]:485
IC[055]:485 IC[056]:500 IC[057]:515 IC[058]:515 IC[059]:515
voltage in mode2: 19.50 V
hash rate in mode2: 07729 GH/s

2022-04-13 23:48:22 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:425 IC[001]:425 IC[002]:410 IC[003]:410 IC[004]:425
IC[005]:410 IC[006]:425 IC[007]:410 IC[008]:425 IC[009]:425
IC[010]:410 IC[011]:425 IC[012]:425 IC[013]:425 IC[014]:410
IC[015]:410 IC[016]:425 IC[017]:410 IC[018]:425 IC[019]:425
IC[020]:425 IC[021]:410 IC[022]:425 IC[023]:410 IC[024]:425
IC[025]:410 IC[026]:425 IC[027]:410 IC[028]:425 IC[029]:425
IC[030]:410 IC[031]:425 IC[032]:425 IC[033]:425 IC[034]:410
IC[035]:410 IC[036]:410 IC[037]:425 IC[038]:425 IC[039]:425
IC[040]:425 IC[041]:425 IC[042]:410 IC[043]:425 IC[044]:410
IC[045]:410 IC[046]:410 IC[047]:425 IC[048]:425 IC[049]:425
IC[050]:425 IC[051]:425 IC[052]:410 IC[053]:425 IC[054]:410
IC[055]:425 IC[056]:410 IC[057]:410 IC[058]:425 IC[059]:425
voltage: 18.80 V
hash rate: 06384 GH/s

freq data per ASIC in mode2:
IC[000]:500 IC[001]:500 IC[002]:485 IC[003]:485 IC[004]:500
IC[005]:485 IC[006]:500 IC[007]:485 IC[008]:500 IC[009]:500
IC[010]:485 IC[011]:500 IC[012]:500 IC[013]:500 IC[014]:485
IC[015]:485 IC[016]:500 IC[017]:485 IC[018]:500 IC[019]:500
IC[020]:500 IC[021]:485 IC[022]:500 IC[023]:485 IC[024]:500
IC[025]:485 IC[026]:485 IC[027]:500 IC[028]:500 IC[029]:500
IC[030]:485 IC[031]:500 IC[032]:500 IC[033]:500 IC[034]:485
IC[035]:485 IC[036]:485 IC[037]:500 IC[038]:500 IC[039]:500
IC[040]:500 IC[041]:500 IC[042]:485 IC[043]:500 IC[044]:485
IC[045]:485 IC[046]:485 IC[047]:500 IC[048]:500 IC[049]:500
IC[050]:500 IC[051]:500 IC[052]:485 IC[053]:500 IC[054]:485
IC[055]:500 IC[056]:485 IC[057]:485 IC[058]:500 IC[059]:500
voltage in mode2: 19.50 V
hash rate in mode2: 07561 GH/s

2022-04-13 23:48:23 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-13 23:48:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffd
2022-04-13 23:48:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-13 23:48:29 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2022-04-13 23:48:29 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-13 23:48:29 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:48:30 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:48:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:48:30 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:48:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:48:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:48:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:48:32 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:48:32 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffd
2022-04-13 23:48:35 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-13 23:48:39 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-13 23:48:39 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-13 23:48:39 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:48:40 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:48:40 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:48:42 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:48:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:48:43 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:48:43 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:48:45 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:48:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffd
2022-04-13 23:48:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-13 23:48:52 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-13 23:48:52 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-13 23:48:52 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:48:55 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:48:55 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:48:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:48:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:49:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:49:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:49:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:49:04 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffd
2022-04-13 23:49:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-13 23:49:11 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-13 23:49:11 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec
2022-04-13 23:49:12 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-13 23:49:42 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-13 23:49:42 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-13 23:49:43 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-13 23:49:45 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2022-04-13 23:49:45 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-13 23:49:45 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:49:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:49:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:49:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:49:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:49:47 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:49:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:49:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:49:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffd
2022-04-13 23:49:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-13 23:49:55 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-13 23:49:55 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-13 23:49:55 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:49:56 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:49:56 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:49:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:49:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:49:59 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:49:59 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:50:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:50:01 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffd
2022-04-13 23:50:04 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-13 23:50:08 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-13 23:50:08 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-13 23:50:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:50:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:50:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:50:14 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:50:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:50:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:50:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:50:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:50:20 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffd
2022-04-13 23:50:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-13 23:50:27 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-13 23:50:27 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
2022-04-13 23:50:27 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-13 23:50:57 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-13 23:50:58 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-13 23:50:59 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-13 23:51:01 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 2
2022-04-13 23:51:01 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-13 23:51:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:51:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:51:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:51:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-13 23:51:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:04 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffd
2022-04-13 23:51:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-13 23:51:11 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-13 23:51:11 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-13 23:51:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:51:13 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:13 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:51:14 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:51:15 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:15 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-13 23:51:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:17 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffd
2022-04-13 23:51:20 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-13 23:51:24 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-13 23:51:24 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-13 23:51:24 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:51:27 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:27 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:51:30 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:30 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:51:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-13 23:51:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-13 23:51:36 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffd
2022-04-13 23:51:39 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-13 23:51:43 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-13 23:51:43 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [2] times, power off hash board and wait [30] sec
2022-04-13 23:51:44 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!

Mem: 137292K used, 96452K free, 0K shrd, 643236K buff, 643280K cached
CPU:   0% usr  10% sys   0% nic  90% idle   0% io   0% irq   0% sirq
Load average: 0.19 0.19 0.10 1/93 12686
PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
1143  1139 root     S    83080  35%   0% /usr/bin/cgminer --version-file /usr/bin/compile_time --default-config /config/cgminer.conf -T --syslog
940     1 root     S     3328   1%   0% /usr/bin/ntpd -p /var/run/ntp.pid -g
953     1 root     S     2984   1%   0% /usr/sbin/lighttpd -f /etc/lighttpd.conf
946     1 avahi    S     2732   1%   0% avahi-daemon: running [antMiner.local]
947   946 avahi    S     2732   1%   0% avahi-daemon: chroot helper
1139     1 root     S     2620   1%   0% {screen} SCREEN -S cgminer -t cgminer -m -d /usr/bin/cgminer --version-file /usr/bin/compile_time --default-config /config/cgminer.conf -T --syslog
970     1 root     S     2152   1%   0% {bitmain_logrota} /bin/sh /usr/bin/bitmain_logrotate
1159     1 root     S     2152   1%   0% {monitorcg} /bin/sh /sbin/monitorcg
733     1 root     S     2152   1%   0% /sbin/syslogd -n -O /var/log/messages
737     1 root     S     2152   1%   0% /sbin/klogd -n
12685 12684 root     R     2152   1%   0% top -b -n 1
925     1 root     S     2152   1%   0% udhcpc -b -t 10 -A 10 -x hostname antMiner -i eth0
12684   953 root     S     2152   1%   0% /bin/sh /www/pages/cgi-bin/monitor.cgi
12686 12684 root     S     2152   1%   0% /bin/sh /www/pages/cgi-bin/monitor.cgi
12183  1159 root     S     2020   1%   0% sleep 20s
12683   970 root     S     2020   1%   0% sleep 1
1157     1 root     S     1912   1%   0% /sbin/getty 115200 ttyPS0
1158     1 root     S     1912   1%   0% /sbin/getty 38400 tty1
1     0 root     S     1656   1%   0% init [5]
685     1 root     S     1640   1%   0% /usr/bin/monitor-ipsig
1145     1 root     S     1636   1%   0% /usr/bin/monitor-recobtn /usr/bin/factory_config_reset.sh
6     2 root     SW       0   0%   0% [kworker/u4:0]
7     2 root     SW       0   0%   0% [rcu_preempt]
59     2 root     SW       0   0%   0% [kworker/0:1]
3     2 root     SW       0   0%   0% [ksoftirqd/0]
18     2 root     SW       0   0%   0% [kworker/u4:1]
720     2 root     SW       0   0%   0% [ubi_bgt1d]
723     2 root     SW       0   0%   0% [ubifs_bgt1_0]
2     0 root     SW       0   0%   0% [kthreadd]
4     2 root     SW       0   0%   0% [kworker/0:0]
5     2 root     SW<      0   0%   0% [kworker/0:0H]
8     2 root     SW       0   0%   0% [rcu_sched]
9     2 root     SW       0   0%   0% [rcu_bh]
10     2 root     SW       0   0%   0% [migration/0]
11     2 root     SW       0   0%   0% [cpuhp/0]
12     2 root     SW       0   0%   0% [cpuhp/1]
13     2 root     SW       0   0%   0% [migration/1]
14     2 root     SW       0   0%   0% [ksoftirqd/1]
15     2 root     SW       0   0%   0% [kworker/1:0]
16     2 root     SW<      0   0%   0% [kworker/1:0H]
17     2 root     SW       0   0%   0% [kdevtmpfs]
248     2 root     SW       0   0%   0% [oom_reaper]
249     2 root     SW<      0   0%   0% [writeback]
251     2 root     SW<      0   0%   0% [crypto]
252     2 root     SW<      0   0%   0% [bioset]
254     2 root     SW<      0   0%   0% [kblockd]
283     2 root     SW<      0   0%   0% [edac-poller]
295     2 root     SW<      0   0%   0% [watchdogd]
379     2 root     SW<      0   0%   0% [rpciod]
393     2 root     SW       0   0%   0% [kswapd0]
394     2 root     SW<      0   0%   0% [vmstat]
395     2 root     SW<      0   0%   0% [nfsiod]
428     2 root     SW<      0   0%   0% [bioset]
429     2 root     SW<      0   0%   0% [bioset]
430     2 root     SW<      0   0%   0% [bioset]
431     2 root     SW<      0   0%   0% [bioset]
432     2 root     SW<      0   0%   0% [bioset]
433     2 root     SW<      0   0%   0% [bioset]
434     2 root     SW<      0   0%   0% [bioset]
435     2 root     SW<      0   0%   0% [bioset]
436     2 root     SW<      0   0%   0% [bioset]
437     2 root     SW<      0   0%   0% [bioset]
438     2 root     SW<      0   0%   0% [bioset]
439     2 root     SW<      0   0%   0% [bioset]
440     2 root     SW<      0   0%   0% [bioset]
441     2 root     SW<      0   0%   0% [bioset]
442     2 root     SW<      0   0%   0% [bioset]
443     2 root     SW<      0   0%   0% [bioset]
477     2 root     SW<      0   0%   0% [bioset]
480     2 root     SW<      0   0%   0% [bioset]
482     2 root     SW<      0   0%   0% [bioset]
485     2 root     SW<      0   0%   0% [bioset]
488     2 root     SW<      0   0%   0% [bioset]
491     2 root     SW<      0   0%   0% [bioset]
494     2 root     SW<      0   0%   0% [bioset]
497     2 root     SW<      0   0%   0% [bioset]
572     2 root     SW<      0   0%   0% [kpsmoused]
597     2 root     SW       0   0%   0% [irq/155-mmc0]
613     2 root     SW<      0   0%   0% [bioset]
618     2 root     SW<      0   0%   0% [bioset]
623     2 root     SW<      0   0%   0% [bioset]
628     2 root     SW<      0   0%   0% [bioset]
633     2 root     SW<      0   0%   0% [bioset]
638     2 root     SW<      0   0%   0% [bioset]
650     2 root     SW<      0   0%   0% [ipv6_addrconf]
658     2 root     SW<      0   0%   0% [deferwq]
662     2 root     SW<      0   0%   0% [ext4-rsv-conver]
708     2 root     SW       0   0%   0% [ubi_bgt0d]
711     2 root     SW       0   0%   0% [ubifs_bgt0_0]






Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 18996K (cc873000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 16/7, WL threshold: 4096, image sequence number: 1841167953
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 521F9D24-545E-4D8A-AD10-C9780DBC570F, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4413/2238, WL threshold: 4096, image sequence number: 1210369717
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B34410AB-B353-4026-A14A-AC6269444EC4, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
 [2022-04-01 21:44:51.479] start listen on 6060 ...
2022-04-01 21:44:21 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2022-04-01 21:44:21 driver-btm-soc.c:8125:bitmain_soc_init: T15
2022-04-01 21:44:21 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2022-04-01 21:44:21 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2022-04-01 21:44:21 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2022-04-01 21:44:21 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2022-04-01 21:44:21 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2022-04-01 21:44:21 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2022-04-01 21:44:21 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15
2022-04-01 21:44:21 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57
2022-04-01 21:44:21 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2022-04-01 21:44:23 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8114ac282b104814
2022-04-01 21:44:23 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2022-04-01 21:44:23 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x5
2022-04-01 21:44:23 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2022-04-01 21:44:23 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2022-04-01 21:44:28 eeprom.c:1418:eeprom_load: done
2022-04-01 21:44:28 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2022-04-01 21:44:28 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2022-04-01 21:44:28 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101
2022-04-01 21:44:28 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100
2022-04-01 21:44:29 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2022-04-01 21:44:33 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2022-04-01 21:44:34 dspic33ep16gs202.c:538:reset_pic: chain[2] ok
2022-04-01 21:44:38 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok
2022-04-01 21:44:38 power.c:137:power_init: power init ...
2022-04-01 21:44:38 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2
2022-04-01 21:44:38 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2022-04-01 21:44:38 power.c:114:power_on: init gpio907
2022-04-01 21:44:40 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:44:41 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2022-04-01 21:44:44 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2022-04-01 21:45:14 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 19.800000
2022-04-01 21:45:14 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 19.500000
2022-04-01 21:45:14 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 19.80, min = 19.50
2022-04-01 21:45:14 power.c:149:set_working_voltage: working_voltage = 19.500000
2022-04-01 21:45:14 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:45:14 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:45:14 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:450 IC[001]:450 IC[002]:450 IC[003]:450 IC[004]:450
IC[005]:450 IC[006]:450 IC[007]:450 IC[008]:450 IC[009]:450
IC[010]:450 IC[011]:450 IC[012]:450 IC[013]:450 IC[014]:450
IC[015]:450 IC[016]:450 IC[017]:450 IC[018]:450 IC[019]:450
IC[020]:450 IC[021]:450 IC[022]:450 IC[023]:450 IC[024]:450
IC[025]:450 IC[026]:450 IC[027]:450 IC[028]:450 IC[029]:450
IC[030]:450 IC[031]:450 IC[032]:450 IC[033]:450 IC[034]:450
IC[035]:450 IC[036]:450 IC[037]:450 IC[038]:450 IC[039]:450
IC[040]:450 IC[041]:450 IC[042]:450 IC[043]:450 IC[044]:450
IC[045]:450 IC[046]:450 IC[047]:450 IC[048]:450 IC[049]:450
IC[050]:450 IC[051]:450 IC[052]:450 IC[053]:450 IC[054]:450
IC[055]:450 IC[056]:450 IC[057]:450 IC[058]:450 IC[059]:450
voltage: 19.00 V
hash rate: 06806 GH/s

freq data per ASIC in mode2:
IC[000]:510 IC[001]:510 IC[002]:510 IC[003]:510 IC[004]:510
IC[005]:510 IC[006]:510 IC[007]:510 IC[008]:510 IC[009]:510
IC[010]:510 IC[011]:510 IC[012]:510 IC[013]:510 IC[014]:510
IC[015]:510 IC[016]:510 IC[017]:510 IC[018]:510 IC[019]:510
IC[020]:510 IC[021]:510 IC[022]:510 IC[023]:510 IC[024]:510
IC[025]:510 IC[026]:510 IC[027]:510 IC[028]:510 IC[029]:510
IC[030]:510 IC[031]:510 IC[032]:510 IC[033]:510 IC[034]:510
IC[035]:510 IC[036]:510 IC[037]:510 IC[038]:510 IC[039]:510
IC[040]:510 IC[041]:510 IC[042]:510 IC[043]:510 IC[044]:510
IC[045]:510 IC[046]:510 IC[047]:510 IC[048]:510 IC[049]:510
IC[050]:510 IC[051]:510 IC[052]:510 IC[053]:510 IC[054]:510
IC[055]:510 IC[056]:510 IC[057]:510 IC[058]:510 IC[059]:510
voltage in mode2: 19.80 V
hash rate in mode2: 07784 GH/s

2022-04-01 21:45:14 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:425 IC[001]:440 IC[002]:440 IC[003]:425 IC[004]:410
IC[005]:410 IC[006]:425 IC[007]:425 IC[008]:440 IC[009]:440
IC[010]:425 IC[011]:440 IC[012]:440 IC[013]:425 IC[014]:410
IC[015]:410 IC[016]:425 IC[017]:440 IC[018]:425 IC[019]:440
IC[020]:440 IC[021]:425 IC[022]:425 IC[023]:440 IC[024]:410
IC[025]:425 IC[026]:440 IC[027]:410 IC[028]:440 IC[029]:425
IC[030]:440 IC[031]:440 IC[032]:425 IC[033]:410 IC[034]:425
IC[035]:410 IC[036]:425 IC[037]:440 IC[038]:425 IC[039]:440
IC[040]:440 IC[041]:440 IC[042]:425 IC[043]:425 IC[044]:410
IC[045]:425 IC[046]:425 IC[047]:440 IC[048]:410 IC[049]:440
IC[050]:440 IC[051]:425 IC[052]:440 IC[053]:425 IC[054]:410
IC[055]:410 IC[056]:425 IC[057]:440 IC[058]:440 IC[059]:425
voltage: 18.80 V
hash rate: 06527 GH/s

freq data per ASIC in mode2:
IC[000]:500 IC[001]:515 IC[002]:515 IC[003]:515 IC[004]:485
IC[005]:485 IC[006]:515 IC[007]:500 IC[008]:515 IC[009]:515
IC[010]:515 IC[011]:515 IC[012]:515 IC[013]:500 IC[014]:485
IC[015]:485 IC[016]:515 IC[017]:515 IC[018]:515 IC[019]:500
IC[020]:515 IC[021]:500 IC[022]:515 IC[023]:515 IC[024]:485
IC[025]:500 IC[026]:515 IC[027]:485 IC[028]:515 IC[029]:515
IC[030]:515 IC[031]:515 IC[032]:515 IC[033]:485 IC[034]:500
IC[035]:485 IC[036]:515 IC[037]:515 IC[038]:500 IC[039]:515
IC[040]:515 IC[041]:515 IC[042]:515 IC[043]:500 IC[044]:485
IC[045]:485 IC[046]:500 IC[047]:515 IC[048]:515 IC[049]:515
IC[050]:515 IC[051]:500 IC[052]:515 IC[053]:515 IC[054]:485
IC[055]:485 IC[056]:500 IC[057]:515 IC[058]:515 IC[059]:515
voltage in mode2: 19.50 V
hash rate in mode2: 07729 GH/s

2022-04-01 21:45:15 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-01 21:45:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:45:18 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:45:21 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2022-04-01 21:45:21 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-01 21:45:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:45:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:22 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:45:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:22 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:45:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:23 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:45:24 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:24 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:45:27 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:45:31 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:45:31 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-01 21:45:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:45:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:45:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:34 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:45:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:45:37 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:37 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:45:40 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:45:44 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:45:44 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-01 21:45:44 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:45:47 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:45:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:45:53 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:53 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:45:56 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:45:56 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:45:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:46:03 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:46:03 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec
2022-04-01 21:46:04 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:46:34 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:46:34 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:46:35 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-01 21:46:37 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2022-04-01 21:46:37 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-01 21:46:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:46:38 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:46:38 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:46:39 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:46:39 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:46:39 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:46:39 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:46:40 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:46:40 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:46:43 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:46:47 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:46:47 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-01 21:46:47 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:46:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:46:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:46:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:46:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:46:52 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:46:52 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:46:53 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:46:53 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:46:56 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:47:00 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:47:00 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-01 21:47:00 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:47:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:47:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:47:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:47:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:47:09 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:47:09 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:47:12 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:47:12 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:47:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:47:19 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:47:19 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
2022-04-01 21:47:20 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:47:50 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:47:50 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:47:51 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-01 21:47:53 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 2
2022-04-01 21:47:53 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-01 21:47:53 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:47:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:47:54 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:47:55 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:47:55 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:47:55 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:47:55 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:47:56 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:47:56 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:47:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:48:03 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:48:03 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-01 21:48:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:48:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:48:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:48:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:48:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:48:08 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:48:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:48:09 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:48:09 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:48:12 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:48:16 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:48:16 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-01 21:48:16 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:48:19 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:48:19 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:48:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:48:22 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:48:25 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:48:25 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:48:28 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:48:28 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:48:31 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:48:35 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:48:35 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [2] times, power off hash board and wait [30] sec
2022-04-01 21:48:36 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:49:06 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:49:06 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:49:07 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-01 21:49:09 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 3
2022-04-01 21:49:09 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-01 21:49:09 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:49:10 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:10 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:49:10 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:10 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:49:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:49:12 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:12 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:49:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:49:19 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:49:19 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-01 21:49:19 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:49:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:49:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:22 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:49:24 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:24 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:49:25 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:25 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:49:28 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:49:32 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:49:32 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-01 21:49:32 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:49:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:35 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:49:38 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:38 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:49:41 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:41 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:49:44 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:49:44 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:49:47 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:49:51 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:49:51 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [3] times, power off hash board and wait [30] sec
2022-04-01 21:49:52 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:50:22 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:50:22 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:50:23 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-01 21:50:25 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:50:25 driver-btm-soc.c:7220:check_asic_num_by_force_open_core: removed chain 0 due to asic num error
2022-04-01 21:50:26 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!
2022-04-01 21:50:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:50:29 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2022-04-01 21:50:32 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2022-04-01 21:50:32 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2
2022-04-01 21:50:32 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:50:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:50:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:50:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:50:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:50:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:50:34 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:50:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:50:35 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:50:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2022-04-01 21:50:42 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0
2022-04-01 21:50:42 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 2
2022-04-01 21:50:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:50:43 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:50:43 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:50:45 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:50:45 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:50:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:50:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:50:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:50:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:50:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2022-04-01 21:50:55 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0
2022-04-01 21:50:55 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 2
2022-04-01 21:50:55 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:50:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:50:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:51:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:51:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:51:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:51:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:51:07 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:51:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:51:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2022-04-01 21:51:14 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0
2022-04-01 21:51:14 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec
2022-04-01 21:51:14 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2022-04-01 21:51:44 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:51:45 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:51:46 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!
2022-04-01 21:51:48 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2022-04-01 21:51:48 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2
2022-04-01 21:51:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:51:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:51:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:51:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:51:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:51:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:51:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:51:51 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:51:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:51:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2022-04-01 21:51:58 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0
2022-04-01 21:51:58 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 2
2022-04-01 21:51:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:51:59 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:51:59 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:52:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:52:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:52:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:52:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:52:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:52:04 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:52:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2022-04-01 21:52:11 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0
2022-04-01 21:52:11 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 2
2022-04-01 21:52:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:52:14 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:52:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:52:17 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:52:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:52:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:52:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:52:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:52:23 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:52:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2022-04-01 21:52:30 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0
2022-04-01 21:52:30 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
2022-04-01 21:52:30 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!
2022-04-01 21:53:00 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:53:00 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:53:01 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2!
2022-04-01 21:53:03 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 2
2022-04-01 21:53:03 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2
2022-04-01 21:53:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:53:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:53:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:53:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:53:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:06 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:53:09 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2022-04-01 21:53:13 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0
2022-04-01 21:53:13 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 2
2022-04-01 21:53:13 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:53:15 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:15 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:53:16 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:16 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:53:18 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:18 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:53:19 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:19 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:53:22 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2022-04-01 21:53:27 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0
2022-04-01 21:53:27 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 2
2022-04-01 21:53:27 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:53:29 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:29 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:53:32 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:32 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:53:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:35 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:53:38 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2
2022-04-01 21:53:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:53:41 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa
2022-04-01 21:53:45 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 0
2022-04-01 21:53:45 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [2] times, power off hash board and wait [30] sec
2022-04-01 21:53:46 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=2!

Mem: 136856K used, 96888K free, 0K shrd, 643236K buff, 643280K cached
CPU:   9% usr   0% sys   0% nic  90% idle   0% io   0% irq   0% sirq
Load average: 0.19 0.06 0.02 1/93 2795
PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
3     2 root     SW       0   0%   9% [ksoftirqd/0]
1145  1140 root     S    83080  35%   0% /usr/bin/cgminer --version-file /usr/bin/compile_time --default-config /config/cgminer.conf -T --syslog
940     1 root     S     3328   1%   0% /usr/bin/ntpd -p /var/run/ntp.pid -g
954     1 root     S     2984   1%   0% /usr/sbin/lighttpd -f /etc/lighttpd.conf
946     1 avahi    S     2732   1%   0% avahi-daemon: running [antMiner.local]
947   946 avahi    S     2732   1%   0% avahi-daemon: chroot helper
1140     1 root     S     2620   1%   0% {screen} SCREEN -S cgminer -t cgminer -m -d /usr/bin/cgminer --version-file /usr/bin/compile_time --default-config /config/cgminer.conf -T --syslog
970     1 root     S     2152   1%   0% {bitmain_logrota} /bin/sh /usr/bin/bitmain_logrotate
735     1 root     S     2152   1%   0% /sbin/syslogd -n -O /var/log/messages
737     1 root     S     2152   1%   0% /sbin/klogd -n
2794  2793 root     R     2152   1%   0% top -b -n 1
925     1 root     S     2152   1%   0% udhcpc -b -t 10 -A 10 -x hostname antMiner -i eth0
1157     1 root     S     2152   1%   0% {monitorcg} /bin/sh /sbin/monitorcg
2793   954 root     S     2152   1%   0% /bin/sh /www/pages/cgi-bin/monitor.cgi
2795  2793 root     S     2152   1%   0% /bin/sh /www/pages/cgi-bin/monitor.cgi
2516  1157 root     S     2020   1%   0% sleep 20s
2792   970 root     S     2020   1%   0% sleep 1
1155     1 root     S     1912   1%   0% /sbin/getty 115200 ttyPS0
1156     1 root     S     1912   1%   0% /sbin/getty 38400 tty1
1     0 root     S     1656   1%   0% init [5]
685     1 root     S     1640   1%   0% /usr/bin/monitor-ipsig
1144     1 root     S     1636   1%   0% /usr/bin/monitor-recobtn /usr/bin/factory_config_reset.sh
18     2 root     SW       0   0%   0% [kworker/u4:1]
7     2 root     SW       0   0%   0% [rcu_preempt]
59     2 root     SW       0   0%   0% [kworker/0:1]
720     2 root     SW       0   0%   0% [ubi_bgt1d]
2     0 root     SW       0   0%   0% [kthreadd]
4     2 root     SW       0   0%   0% [kworker/0:0]
5     2 root     SW<      0   0%   0% [kworker/0:0H]
6     2 root     SW       0   0%   0% [kworker/u4:0]
8     2 root     SW       0   0%   0% [rcu_sched]
9     2 root     SW       0   0%   0% [rcu_bh]
10     2 root     SW       0   0%   0% [migration/0]
11     2 root     SW       0   0%   0% [cpuhp/0]
12     2 root     SW       0   0%   0% [cpuhp/1]
13     2 root     SW       0   0%   0% [migration/1]
14     2 root     SW       0   0%   0% [ksoftirqd/1]
15     2 root     SW       0   0%   0% [kworker/1:0]
16     2 root     SW<      0   0%   0% [kworker/1:0H]
17     2 root     SW       0   0%   0% [kdevtmpfs]
248     2 root     SW       0   0%   0% [oom_reaper]
249     2 root     SW<      0   0%   0% [writeback]
251     2 root     SW<      0   0%   0% [crypto]
252     2 root     SW<      0   0%   0% [bioset]
254     2 root     SW<      0   0%   0% [kblockd]
283     2 root     SW<      0   0%   0% [edac-poller]
295     2 root     SW<      0   0%   0% [watchdogd]
379     2 root     SW<      0   0%   0% [rpciod]
393     2 root     SW       0   0%   0% [kswapd0]
394     2 root     SW<      0   0%   0% [vmstat]
395     2 root     SW<      0   0%   0% [nfsiod]
428     2 root     SW<      0   0%   0% [bioset]
429     2 root     SW<      0   0%   0% [bioset]
430     2 root     SW<      0   0%   0% [bioset]
431     2 root     SW<      0   0%   0% [bioset]
432     2 root     SW<      0   0%   0% [bioset]
433     2 root     SW<      0   0%   0% [bioset]
434     2 root     SW<      0   0%   0% [bioset]
435     2 root     SW<      0   0%   0% [bioset]
436     2 root     SW<      0   0%   0% [bioset]
437     2 root     SW<      0   0%   0% [bioset]
438     2 root     SW<      0   0%   0% [bioset]
439     2 root     SW<      0   0%   0% [bioset]
440     2 root     SW<      0   0%   0% [bioset]
441     2 root     SW<      0   0%   0% [bioset]
442     2 root     SW<      0   0%   0% [bioset]
443     2 root     SW<      0   0%   0% [bioset]
477     2 root     SW<      0   0%   0% [bioset]
480     2 root     SW<      0   0%   0% [bioset]
482     2 root     SW<      0   0%   0% [bioset]
485     2 root     SW<      0   0%   0% [bioset]
488     2 root     SW<      0   0%   0% [bioset]
491     2 root     SW<      0   0%   0% [bioset]
494     2 root     SW<      0   0%   0% [bioset]
497     2 root     SW<      0   0%   0% [bioset]
572     2 root     SW<      0   0%   0% [kpsmoused]
597     2 root     SW       0   0%   0% [irq/155-mmc0]
613     2 root     SW<      0   0%   0% [bioset]
618     2 root     SW<      0   0%   0% [bioset]
623     2 root     SW<      0   0%   0% [bioset]
628     2 root     SW<      0   0%   0% [bioset]
633     2 root     SW<      0   0%   0% [bioset]
638     2 root     SW<      0   0%   0% [bioset]
650     2 root     SW<      0   0%   0% [ipv6_addrconf]
658     2 root     SW<      0   0%   0% [deferwq]
662     2 root     SW<      0   0%   0% [ext4-rsv-conver]
708     2 root     SW       0   0%   0% [ubi_bgt0d]
711     2 root     SW       0   0%   0% [ubifs_bgt0_0]
723     2 root     SW       0   0%   0% [ubifs_bgt1_0]





Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 18996K (cc873000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 16/7, WL threshold: 4096, image sequence number: 1841167953
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 521F9D24-545E-4D8A-AD10-C9780DBC570F, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4413/2238, WL threshold: 4096, image sequence number: 1210369717
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B34410AB-B353-4026-A14A-AC6269444EC4, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
 [2022-04-01 21:31:25.489] start listen on 6060 ...
2022-04-01 21:30:55 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2022-04-01 21:30:55 driver-btm-soc.c:8125:bitmain_soc_init: T15
2022-04-01 21:30:55 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2022-04-01 21:30:55 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2022-04-01 21:30:55 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2022-04-01 21:30:55 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2022-04-01 21:30:55 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2022-04-01 21:30:55 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2022-04-01 21:30:55 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15
2022-04-01 21:30:55 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57
2022-04-01 21:30:55 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2022-04-01 21:30:57 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8114ac282b104814
2022-04-01 21:30:57 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2022-04-01 21:30:57 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7
2022-04-01 21:30:57 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2022-04-01 21:30:57 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2022-04-01 21:30:57 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2022-04-01 21:31:05 eeprom.c:1418:eeprom_load: done
2022-04-01 21:31:05 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2022-04-01 21:31:05 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2022-04-01 21:31:05 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101
2022-04-01 21:31:05 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100
2022-04-01 21:31:05 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101
2022-04-01 21:31:05 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100
2022-04-01 21:31:05 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2022-04-01 21:31:10 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2022-04-01 21:31:11 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2022-04-01 21:31:15 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2022-04-01 21:31:16 dspic33ep16gs202.c:531:reset_pic: failed on Chain[2]! read_back_data[0] = 0x1, read_back_data[1] = 0x1
2022-04-01 21:31:19 dspic33ep16gs202.c:531:reset_pic: failed on Chain[2]! read_back_data[0] = 0x1, read_back_data[1] = 0x1
2022-04-01 21:31:23 dspic33ep16gs202.c:531:reset_pic: failed on Chain[2]! read_back_data[0] = 0x1, read_back_data[1] = 0x1
2022-04-01 21:31:26 driver-btm-soc.c:5311:init_pic_one_chain: Chain[2] PIC init failed!
2022-04-01 21:31:26 freq_tuning.c:3097:error_code_set: error_code = 4, chain = 2
2022-04-01 21:31:26 power.c:137:power_init: power init ...
2022-04-01 21:31:26 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1
2022-04-01 21:31:26 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0
2022-04-01 21:31:26 power.c:114:power_on: init gpio907
2022-04-01 21:31:27 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:31:28 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2022-04-01 21:31:31 driver-btm-soc.c:8241:bitmain_soc_init: Enter 30s sleep to make sure power release finish.
2022-04-01 21:32:01 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 19.800000
2022-04-01 21:32:01 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 19.500000
2022-04-01 21:32:01 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 19.80, min = 19.50
2022-04-01 21:32:01 power.c:149:set_working_voltage: working_voltage = 19.500000
2022-04-01 21:32:01 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:32:01 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:32:01 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:450 IC[001]:450 IC[002]:450 IC[003]:450 IC[004]:450
IC[005]:450 IC[006]:450 IC[007]:450 IC[008]:450 IC[009]:450
IC[010]:450 IC[011]:450 IC[012]:450 IC[013]:450 IC[014]:450
IC[015]:450 IC[016]:450 IC[017]:450 IC[018]:450 IC[019]:450
IC[020]:450 IC[021]:450 IC[022]:450 IC[023]:450 IC[024]:450
IC[025]:450 IC[026]:450 IC[027]:450 IC[028]:450 IC[029]:450
IC[030]:450 IC[031]:450 IC[032]:450 IC[033]:450 IC[034]:450
IC[035]:450 IC[036]:450 IC[037]:450 IC[038]:450 IC[039]:450
IC[040]:450 IC[041]:450 IC[042]:450 IC[043]:450 IC[044]:450
IC[045]:450 IC[046]:450 IC[047]:450 IC[048]:450 IC[049]:450
IC[050]:450 IC[051]:450 IC[052]:450 IC[053]:450 IC[054]:450
IC[055]:450 IC[056]:450 IC[057]:450 IC[058]:450 IC[059]:450
voltage: 19.00 V
hash rate: 06806 GH/s

freq data per ASIC in mode2:
IC[000]:510 IC[001]:510 IC[002]:510 IC[003]:510 IC[004]:510
IC[005]:510 IC[006]:510 IC[007]:510 IC[008]:510 IC[009]:510
IC[010]:510 IC[011]:510 IC[012]:510 IC[013]:510 IC[014]:510
IC[015]:510 IC[016]:510 IC[017]:510 IC[018]:510 IC[019]:510
IC[020]:510 IC[021]:510 IC[022]:510 IC[023]:510 IC[024]:510
IC[025]:510 IC[026]:510 IC[027]:510 IC[028]:510 IC[029]:510
IC[030]:510 IC[031]:510 IC[032]:510 IC[033]:510 IC[034]:510
IC[035]:510 IC[036]:510 IC[037]:510 IC[038]:510 IC[039]:510
IC[040]:510 IC[041]:510 IC[042]:510 IC[043]:510 IC[044]:510
IC[045]:510 IC[046]:510 IC[047]:510 IC[048]:510 IC[049]:510
IC[050]:510 IC[051]:510 IC[052]:510 IC[053]:510 IC[054]:510
IC[055]:510 IC[056]:510 IC[057]:510 IC[058]:510 IC[059]:510
voltage in mode2: 19.80 V
hash rate in mode2: 07784 GH/s

2022-04-01 21:32:02 eeprom.c:840:travel_eeprom_store: chain[1] data in eeprom is:
magic number: 0x7f
freq data per ASIC:
IC[000]:425 IC[001]:425 IC[002]:410 IC[003]:410 IC[004]:425
IC[005]:410 IC[006]:425 IC[007]:410 IC[008]:425 IC[009]:425
IC[010]:410 IC[011]:425 IC[012]:425 IC[013]:425 IC[014]:410
IC[015]:410 IC[016]:425 IC[017]:410 IC[018]:425 IC[019]:425
IC[020]:425 IC[021]:410 IC[022]:425 IC[023]:410 IC[024]:425
IC[025]:410 IC[026]:425 IC[027]:410 IC[028]:425 IC[029]:425
IC[030]:410 IC[031]:425 IC[032]:425 IC[033]:425 IC[034]:410
IC[035]:410 IC[036]:410 IC[037]:425 IC[038]:425 IC[039]:425
IC[040]:425 IC[041]:425 IC[042]:410 IC[043]:425 IC[044]:410
IC[045]:410 IC[046]:410 IC[047]:425 IC[048]:425 IC[049]:425
IC[050]:425 IC[051]:425 IC[052]:410 IC[053]:425 IC[054]:410
IC[055]:425 IC[056]:410 IC[057]:410 IC[058]:425 IC[059]:425
voltage: 18.80 V
hash rate: 06384 GH/s

freq data per ASIC in mode2:
IC[000]:500 IC[001]:500 IC[002]:485 IC[003]:485 IC[004]:500
IC[005]:485 IC[006]:500 IC[007]:485 IC[008]:500 IC[009]:500
IC[010]:485 IC[011]:500 IC[012]:500 IC[013]:500 IC[014]:485
IC[015]:485 IC[016]:500 IC[017]:485 IC[018]:500 IC[019]:500
IC[020]:500 IC[021]:485 IC[022]:500 IC[023]:485 IC[024]:500
IC[025]:485 IC[026]:485 IC[027]:500 IC[028]:500 IC[029]:500
IC[030]:485 IC[031]:500 IC[032]:500 IC[033]:500 IC[034]:485
IC[035]:485 IC[036]:485 IC[037]:500 IC[038]:500 IC[039]:500
IC[040]:500 IC[041]:500 IC[042]:485 IC[043]:500 IC[044]:485
IC[045]:485 IC[046]:485 IC[047]:500 IC[048]:500 IC[049]:500
IC[050]:500 IC[051]:500 IC[052]:485 IC[053]:500 IC[054]:485
IC[055]:500 IC[056]:485 IC[057]:485 IC[058]:500 IC[059]:500
voltage in mode2: 19.50 V
hash rate in mode2: 07561 GH/s

2022-04-01 21:32:02 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-01 21:32:02 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:32:05 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:32:08 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2022-04-01 21:32:08 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-01 21:32:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:32:09 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:09 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:32:10 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:10 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:32:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:32:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:11 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:32:14 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:32:18 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:32:18 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-01 21:32:18 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:32:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:32:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:32:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:23 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:32:24 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:24 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:32:27 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:32:32 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:32:32 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-01 21:32:32 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:32:34 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:34 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:32:37 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:32:40 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:40 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:32:43 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:32:43 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:32:46 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:32:50 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:32:50 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec
2022-04-01 21:32:51 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:33:21 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:33:21 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:33:22 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-01 21:33:24 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2022-04-01 21:33:24 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-01 21:33:24 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:33:25 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:25 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:33:26 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:26 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:33:27 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:27 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:33:27 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:27 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:33:30 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:33:34 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:33:34 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-01 21:33:34 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:33:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:33:37 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:33:39 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:39 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:33:40 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:40 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:33:43 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:33:48 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:33:48 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-01 21:33:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:33:50 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:33:53 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:53 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:33:56 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:56 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:33:59 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:33:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:34:02 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:34:06 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:34:06 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
2022-04-01 21:34:07 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:34:37 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:34:38 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:34:38 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-01 21:34:40 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 2
2022-04-01 21:34:40 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-01 21:34:40 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:34:41 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:34:41 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:34:42 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:34:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:34:43 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:34:43 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:34:43 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:34:43 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:34:46 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:34:51 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:34:51 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-01 21:34:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:34:52 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:34:52 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:34:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:34:54 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:34:55 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:34:55 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:34:56 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:34:56 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:34:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:35:04 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:35:04 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-01 21:35:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:35:07 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:35:07 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:35:10 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:35:10 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:35:12 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:35:12 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:35:15 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:35:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:35:18 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:35:23 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:35:23 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [2] times, power off hash board and wait [30] sec
2022-04-01 21:35:23 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:35:53 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:35:53 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:35:54 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-01 21:35:56 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 3
2022-04-01 21:35:56 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0
2022-04-01 21:35:56 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:35:57 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:35:57 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:35:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:35:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:35:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:35:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:35:59 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:35:59 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:36:02 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:36:06 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:36:06 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 0
2022-04-01 21:36:06 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:36:08 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:36:08 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:36:09 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:36:09 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:36:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:36:11 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:36:12 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:36:12 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:36:15 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:36:19 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:36:19 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 0
2022-04-01 21:36:19 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:36:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:36:22 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:36:25 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:36:25 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:36:28 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:36:28 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:36:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0
2022-04-01 21:36:31 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000ffff
2022-04-01 21:36:34 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:36:38 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 0
2022-04-01 21:36:38 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [3] times, power off hash board and wait [30] sec
2022-04-01 21:36:39 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:37:09 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:37:09 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:37:10 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0!
2022-04-01 21:37:12 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=0!
2022-04-01 21:37:12 driver-btm-soc.c:7220:check_asic_num_by_force_open_core: removed chain 0 due to asic num error
2022-04-01 21:37:13 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2022-04-01 21:37:13 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:37:16 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-01 21:37:19 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0
2022-04-01 21:37:19 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2022-04-01 21:37:19 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:37:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:37:20 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:20 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:37:21 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:21 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:37:22 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:22 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:37:25 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-01 21:37:29 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2022-04-01 21:37:29 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 1
2022-04-01 21:37:29 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:37:31 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:37:32 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:32 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:37:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:33 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:37:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:35 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:37:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-01 21:37:42 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2022-04-01 21:37:42 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 1
2022-04-01 21:37:42 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:37:45 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:45 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:37:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:37:51 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:37:54 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:37:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:37:57 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-01 21:38:01 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2022-04-01 21:38:01 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [0] times, power off hash board and wait [30] sec
2022-04-01 21:38:02 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2022-04-01 21:38:32 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:38:32 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:38:33 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2022-04-01 21:38:35 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 1
2022-04-01 21:38:35 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2022-04-01 21:38:35 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:38:35 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:38:35 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:38:36 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:38:36 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:38:37 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:38:37 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:38:38 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:38:38 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:38:41 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-01 21:38:45 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2022-04-01 21:38:45 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 1
2022-04-01 21:38:45 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:38:46 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:38:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:38:48 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:38:48 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:38:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:38:49 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:38:51 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:38:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:38:54 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-01 21:38:58 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2022-04-01 21:38:58 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 1
2022-04-01 21:38:58 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:39:01 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:39:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:39:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:39:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:39:07 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:39:07 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64
2022-04-01 21:39:10 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:39:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:39:13 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-01 21:39:17 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2022-04-01 21:39:17 driver-btm-soc.c:5466:check_asic_num_by_pre_open_core: Unable to find all asic [1] times, power off hash board and wait [30] sec
2022-04-01 21:39:17 dspic33ep16gs202.c:409:hashboard_power_cntl: [0] ok, i2c=1!
2022-04-01 21:39:47 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ...
2022-04-01 21:39:47 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000
2022-04-01 21:39:48 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1!
2022-04-01 21:39:50 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 2
2022-04-01 21:39:50 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1
2022-04-01 21:39:50 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:39:51 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:39:51 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:39:52 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:39:52 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:39:53 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:39:53 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16
2022-04-01 21:39:53 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:39:53 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:39:56 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-01 21:40:01 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2022-04-01 21:40:01 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 32 core for chain 1
2022-04-01 21:40:01 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:40:02 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:40:02 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:40:03 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:40:03 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:40:05 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:40:05 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32
2022-04-01 21:40:06 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1
2022-04-01 21:40:06 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffe
2022-04-01 21:40:09 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc
2022-04-01 21:40:14 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 0
2022-04-01 21:40:14 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 64 core for chain 1
2022-04-01 21:40:14 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64

Kernel Log



Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 18996K (cc873000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 15/6, WL threshold: 4096, image sequence number: 1841167953
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 521F9D24-545E-4D8A-AD10-C9780DBC570F, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 4413/2238, WL threshold: 4096, image sequence number: 1210369717
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B34410AB-B353-4026-A14A-AC6269444EC4, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab01b
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
 [2022-02-25 02:15:35.160] start listen on 6060 ...
2022-02-25 02:26:52 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version
2022-02-25 02:26:52 driver-btm-soc.c:8125:bitmain_soc_init: T15
2022-02-25 02:26:52 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1
2022-02-25 02:26:52 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1
2022-02-25 02:26:52 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false
2022-02-25 02:26:52 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0
2022-02-25 02:26:52 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn
2022-02-25 02:26:52 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX
2022-02-25 02:26:52 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15
2022-02-25 02:26:52 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57
2022-02-25 02:26:52 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times...
2022-02-25 02:26:54 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 8114ac282b104814
2022-02-25 02:26:54 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B
2022-02-25 02:26:54 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7
2022-02-25 02:26:54 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist
2022-02-25 02:26:54 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist
2022-02-25 02:26:54 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist
2022-02-25 02:27:02 eeprom.c:1418:eeprom_load: done
2022-02-25 02:27:02 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101
2022-02-25 02:27:02 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100
2022-02-25 02:27:02 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101
2022-02-25 02:27:02 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100
2022-02-25 02:27:02 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101
2022-02-25 02:27:02 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100
2022-02-25 02:27:03 dspic33ep16gs202.c:538:reset_pic: chain[0] ok
2022-02-25 02:27:07 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok
2022-02-25 02:27:08 dspic33ep16gs202.c:538:reset_pic: chain[1] ok
2022-02-25 02:27:12 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok
2022-02-25 02:27:13 dspic33ep16gs202.c:531:reset_pic: failed on Chain[2]! read_back_data[0] = 0x1, read_back_data[1] = 0x1
2022-02-25 02:27:16 dspic33ep16gs202.c:531:reset_pic: failed on Chain[2]! read_back_data[0] = 0x1, read_back_data[1] = 0x1
2022-02-25 02:27:20 dspic33ep16gs202.c:531:reset_pic: failed on Chain[2]! read_back_data[0] = 0x1, read_back_data[1] = 0x1




Monitor

Mem: 136208K used, 97536K free, 0K shrd, 643184K buff, 643228K cached
CPU:   0% usr   0% sys   0% nic 100% idle   0% io   0% irq   0% sirq
Load average: 0.13 0.13 0.16 1/88 12136
PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
12135 12134 root     R     2152   1%   0% top -b -n 1
941     1 root     S     3328   1%   0% /usr/bin/ntpd -p /var/run/ntp.pid -g
955     1 root     S     2984   1%   0% /usr/sbin/lighttpd -f /etc/lighttpd.conf
947     1 avahi    S     2836   1%   0% avahi-daemon: running [antMiner.local]
948   947 avahi    S     2732   1%   0% avahi-daemon: chroot helper
17136     1 root     S     2152   1%   0% {monitorcg} /bin/sh /sbin/monitorcg
738     1 root     S     2152   1%   0% /sbin/syslogd -n -O /var/log/messages
12026 12002 root     S     2152   1%   0% {bitmain_logrota} /bin/sh /usr/bin/bitmain_logrotate
742     1 root     S     2152   1%   0% /sbin/klogd -n
12002 17136 root     S     2152   1%   0% {cgminer.sh} /bin/sh /etc/init.d/cgminer.sh restart
932     1 root     S     2152   1%   0% udhcpc -b -t 10 -A 10 -x hostname antMiner -i eth0
12134   955 root     S     2152   1%   0% /bin/sh /www/pages/cgi-bin/monitor.cgi
12136 12134 root     S     2152   1%   0% /bin/sh /www/pages/cgi-bin/monitor.cgi
12054 12002 root     S     2020   1%   0% sleep 5s
12133 12026 root     S     2020   1%   0% sleep 1
1163     1 root     S     1912   1%   0% /sbin/getty 115200 ttyPS0
1164     1 root     S     1912   1%   0% /sbin/getty 38400 tty1
1     0 root     S     1656   1%   0% init [5]
685     1 root     S     1640   1%   0% /usr/bin/monitor-ipsig
1145     1 root     S     1636   1%   0% /usr/bin/monitor-recobtn /usr/bin/factory_config_reset.sh
7     2 root     SW       0   0%   0% [rcu_preempt]
3     2 root     SW       0   0%   0% [ksoftirqd/0]
59     2 root     SW       0   0%   0% [kworker/0:1]
720     2 root     SW       0   0%   0% [ubi_bgt1d]
18     2 root     SW       0   0%   0% [kworker/u4:1]
708     2 root     SW       0   0%   0% [ubi_bgt0d]
723     2 root     SW       0   0%   0% [ubifs_bgt1_0]
2     0 root     SW       0   0%   0% [kthreadd]
4     2 root     SW       0   0%   0% [kworker/0:0]
5     2 root     SW<      0   0%   0% [kworker/0:0H]
8     2 root     SW       0   0%   0% [rcu_sched]
9     2 root     SW       0   0%   0% [rcu_bh]
10     2 root     SW       0   0%   0% [migration/0]
11     2 root     SW       0   0%   0% [cpuhp/0]
12     2 root     SW       0   0%   0% [cpuhp/1]
13     2 root     SW       0   0%   0% [migration/1]
14     2 root     SW       0   0%   0% [ksoftirqd/1]
15     2 root     SW       0   0%   0% [kworker/1:0]
16     2 root     SW<      0   0%   0% [kworker/1:0H]
17     2 root     SW       0   0%   0% [kdevtmpfs]
248     2 root     SW       0   0%   0% [oom_reaper]
249     2 root     SW<      0   0%   0% [writeback]
251     2 root     SW<      0   0%   0% [crypto]
252     2 root     SW<      0   0%   0% [bioset]
254     2 root     SW<      0   0%   0% [kblockd]
283     2 root     SW<      0   0%   0% [edac-poller]
295     2 root     SW<      0   0%   0% [watchdogd]
379     2 root     SW<      0   0%   0% [rpciod]
393     2 root     SW       0   0%   0% [kswapd0]
394     2 root     SW<      0   0%   0% [vmstat]
395     2 root     SW<      0   0%   0% [nfsiod]
428     2 root     SW<      0   0%   0% [bioset]
429     2 root     SW<      0   0%   0% [bioset]
430     2 root     SW<      0   0%   0% [bioset]
431     2 root     SW<      0   0%   0% [bioset]
432     2 root     SW<      0   0%   0% [bioset]
433     2 root     SW<      0   0%   0% [bioset]
434     2 root     SW<      0   0%   0% [bioset]
435     2 root     SW<      0   0%   0% [bioset]
436     2 root     SW<      0   0%   0% [bioset]
437     2 root     SW<      0   0%   0% [bioset]
438     2 root     SW<      0   0%   0% [bioset]
439     2 root     SW<      0   0%   0% [bioset]
440     2 root     SW<      0   0%   0% [bioset]
441     2 root     SW<      0   0%   0% [bioset]
442     2 root     SW<      0   0%   0% [bioset]
443     2 root     SW<      0   0%   0% [bioset]
477     2 root     SW<      0   0%   0% [bioset]
480     2 root     SW<      0   0%   0% [bioset]
482     2 root     SW<      0   0%   0% [bioset]
485     2 root     SW<      0   0%   0% [bioset]
488     2 root     SW<      0   0%   0% [bioset]
491     2 root     SW<      0   0%   0% [bioset]
494     2 root     SW<      0   0%   0% [bioset]
497     2 root     SW<      0   0%   0% [bioset]
572     2 root     SW<      0   0%   0% [kpsmoused]
597     2 root     SW       0   0%   0% [irq/155-mmc0]
613     2 root     SW<      0   0%   0% [bioset]
618     2 root     SW<      0   0%   0% [bioset]
623     2 root     SW<      0   0%   0% [bioset]
628     2 root     SW<      0   0%   0% [bioset]
633     2 root     SW<      0   0%   0% [bioset]
638     2 root     SW<      0   0%   0% [bioset]
650     2 root     SW<      0   0%   0% [ipv6_addrconf]
658     2 root     SW<      0   0%   0% [deferwq]
662     2 root     SW<      0   0%   0% [ext4-rsv-conver]
711     2 root     SW       0   0%   0% [ubifs_bgt0_0]
899     2 root     SW       0   0%   0% [kworker/u4:2]