Topic: [SOLD] 5970 Danger Den water blocks (Read 3203 times)
Blocks arrived today. Well packed and promptly shipped. Blocks are in good condition. Would do business again with SlaveInDebt.
Sold to DaT
Sorry portron. I love these DangerDen blocks. Not as flashy as EK but a better value IMHO.
Dang missed it. If deathandtaxes doesn't take them... I will 
I'll buy both but have a couple questions.
What coolant was used?
I assume you have all the mounting hardware for both blocks?
You will vouch that at least looking in the inlets you see no "goop", algae, sludge, residue, corrosion, etc?
Block surface is undamaged (no nicks, cracks, gouges, etc)? Some oxidation is no problem I got copper cleaner.
Answer the above and give me a quote for both including shipping.
What coolant was used?
I assume you have all the mounting hardware for both blocks?
You will vouch that at least looking in the inlets you see no "goop", algae, sludge, residue, corrosion, etc?
Block surface is undamaged (no nicks, cracks, gouges, etc)? Some oxidation is no problem I got copper cleaner.
Answer the above and give me a quote for both including shipping.
All mounting screws, rubber washers, nut are included for each card.
Blocks were run by alexmat I have not run them so coolant used is unknown. They have been cleaned and flushed with warranty sticker untouched.
http://i40.tinypic.com/k9gz4.jpg inlets are clean. Normal copper oxidation.
http://i41.tinypic.com/auywzc.jpg higher res. no damage, nicks, cracks, gouges, etc.
I cant confirm this but these were originally owned by alexmat. But slaveindebt put the original heatsinks back on the 5970s he bought.
I'll buy both but have a couple questions.
What coolant was used?
I assume you have all the mounting hardware for both blocks?
You will vouch that at least looking in the inlets you see no "goop", algae, sludge, residue, corrosion, etc?
Block surface is undamaged (no nicks, cracks, gouges, etc)? Some oxidation is no problem I got copper cleaner.
Answer the above and give me a quote for both including shipping.
What coolant was used?
I assume you have all the mounting hardware for both blocks?
You will vouch that at least looking in the inlets you see no "goop", algae, sludge, residue, corrosion, etc?
Block surface is undamaged (no nicks, cracks, gouges, etc)? Some oxidation is no problem I got copper cleaner.
Answer the above and give me a quote for both including shipping.
2 Danger Den 5970 water blocks
Mounting hardware for each
2 plugs each
All you see here basically
$85 shipped each through USPS unless you specify otherwise to the lower 48 from SC.
Accepting BTC, Dwolla, and Paypal in that order preferred. You pay Paypal fee if you decide to go that route.
Mounting hardware for each
2 plugs each
All you see here basically
$85 shipped each through USPS unless you specify otherwise to the lower 48 from SC.
Accepting BTC, Dwolla, and Paypal in that order preferred. You pay Paypal fee if you decide to go that route.
Jump to: