Topic: (sold) A pair of new 49 port hubs good for ant miner sticks. (Read 862 times)

Item arrived yesterday. Perfect Condition of package. I did not connect them yet, but I am very sure they will work flawless. Thanks philip for quick delivery and being honest as I sent you coins first. Will leave a good feedback now.
(The package had extra fuses, 2X USB-2 cable, 2X fans, along with 2 hubs)
Thanks!

Sent. Thanks, and shipping Address sent as PM
https://blockchain.info/tx/01cd7c1e163c9322645e3f0fdf1a4fb10fb93b56c042bb9ccc08e4d2adfbb298

  thank you

please send coins to the address below


1Fo2K52Rz7LZw9fcF5BDdDBjfNaViQ8J3x

I am taking the hubs. I will trust philip by sending first as he's been here for longer.
Thanks

AT big jon =   He used a washer to increase the gap so the power connector fits better. you got it


here are more photos

okay when you plug in the psu mobo power jack the fit is really tight due to the top pcp board the nylon washers give enough space for the psu mobo  power jack to plug in.

see these three spots get lifted up just a bit




here is on end in place



BTW the two I am selling are new in box. I did not do the mods on them or test them.  I had a few people ask me if they are new. they are. I have had a total of 7 in house.

I sold off 3  used, 1 new = 4 and   I am using 1 = 5 of the 7 .

 I have two in the box not used. I had a few people ask me and realized the  top  post may not be clear enough as to the condition of these two.


I will do the mods before I ship and I will power on and test them. I did mention that my past experience with the five I have used has shown me

1) 38-42 run better then 45-49

 2) a 30 amp fuse is a better choice. then the stock 40 amp fuse

3)  you want to use fans

4) you want to use the 3 nylon spacers for the ease of plugging in the power jack

5)  a few ports are loose and need to be bent a bit tighter to keep connection to the sticks.

these are the washers used to make more space

http://www.amazon.com/gp/product/B00BJLZ3BK/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

He used a washer to increase the gap so the power connector fits better.

Don't understand the mod you are talking about.

this is my current 42 ant miner on 1 hub setup







this is not for sale but is a pair of 140mm fans setup with grills and food dehydrator screening to prevent a short it will really cool off a 49 port hub well

 I am usa based.  I will ship in a flat rate us post office box. to all 50 states.

These are new i.e.  not tested or modded as of today.

I have had 7 of these.  I use one sold four and still have

 these 2  both are new.

I do 1 mod  I add a few nylon washers as spacing to allow the atx power cable to fit better.

I have found 38 to 42 ports work better then trying all 49 ports. and in general a few ports are a bit loose and don't work
 
well. without bending them to fit tighter. Rather then really taxing the shit out of these I run 38 to 42 ports.

I have found using a 30 amp fuse is safer then the  stock 40 amp fuse. I will give you a 30 amp fuse.

I will give you a usb 2.0 cable

I have found that you can run a pair of 120mm fans off the atx power supply with a molex adapter thus getting more use

from the psu used to power the hub.  lay them on top of the sticks and blow the air up to the ceiling .

price is .16 btc for 1 hub   .30 btc for both hubs

I can ship them today.

I would also take LTC using cex.io as the conversion rate.  it is about 5.6 for 1 hub and about 10.2 for 2 hubs

send me a pm.  no escrow for small ticket items  like this and you pay up front
this is of a 122 stick setup it has 3 49 port hubs and 122 old school .333gh AM be's .

 that white screening is used with hot air food dehydrators works great




here is a shot of the nylon washer mod.
trust me you need to do this mod or the power cords don't fit well