Topic: solo mining cointerra IV 1.6 ths (Read 902 times)
Ok so i got bitcoind to work nvm on that.
Ok I know its stupid to solo mine even with 1.6 ths. But I want to try, the only way I understand it with a cointerra due to the web interface running cgminer for you is to make a private pool. Is there another way? can I just point the interface to my ip address with bitcoind running. I tried but I couldn't get it to work. I am also having trouble getting bitcoind to getwork with this config:
# bitcoin.conf configuration file. Lines beginning with # are comments.
# Network-related settings:
# Run on the test network instead of the real bitcoin network.
#testnet=0
# Connect via a socks4 proxy
#proxy=127.0.0.1:9050
##############################################################
## Quick Primer on addnode vs connect ##
## Let's say for instance you use addnode=4.2.2.4 ##
## addnode will connect you to and tell you about the ##
## nodes connected to 4.2.2.4. In addition it will tell ##
## the other nodes connected to it that you exist so ##
## they can connect to you. ##
## connect will not do the above when you 'connect' to it. ##
## It will *only* connect you to 4.2.2.4 and no one else.##
## ##
## So if you're behind a firewall, or have other problems ##
## finding nodes, add some using 'addnode'. ##
## ##
## If you want to stay private, use 'connect' to only ##
## connect to "trusted" nodes. ##
## ##
## If you run multiple nodes on a LAN, there's no need for ##
## all of them to open lots of connections. Instead ##
## 'connect' them all to one node that is port forwarded ##
## and has lots of connections. ##
## Thanks goes to [Noodle] on Freenode. ##
##############################################################
# Use as many addnode= settings as you like to connect to specific peers
#addnode=69.164.218.197
#addnode=10.0.0.2:8333
# ... or use as many connect= settings as you like to connect ONLY
# to specific peers:
#connect=69.164.218.197
#connect=10.0.0.1:8333
# Maximum number of inbound+outbound connections.
#maxconnections=
# JSON-RPC options (for controlling a running Bitcoin/bitcoind process)
# server=1 tells Bitcoin-QT to accept JSON-RPC commands.
server=1
# You must set rpcuser and rpcpassword to secure the JSON-RPC api
rpcuser=user
rpcpassword=pass
# How many seconds bitcoin will wait for a complete RPC HTTP request.
# after the HTTP connection is established.
#rpctimeout=30
# By default, only RPC connections from localhost are allowed. Specify
# as many rpcallowip= settings as you like to allow connections from
# other hosts (and you may use * as a wildcard character).
# NOTE: opening up the RPC port to hosts outside your local
# trusted network is NOT RECOMMENDED, because the rpcpassword
# is transmitted over the network unencrypted.
#rpcallowip=10.1.1.34
#rpcallowip=192.168.1.*
# Listen for RPC connections on this TCP port:
rpcport=8332
# You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind
# running on another host using this option:
rpcconnect=127.0.0.1
# Use Secure Sockets Layer (also known as TLS or HTTPS) to communicate
# with Bitcoin -server or bitcoind
# rpcssl=1
# OpenSSL settings used when rpcssl=1
#rpcsslciphers=TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH
#rpcsslcertificatechainfile=server.cert
#rpcsslprivatekeyfile=server.pem
# Miscellaneous options
# Set gen=1 to attempt to generate bitcoins
gen=1
# Pre-generate this many public/private key pairs, so wallet backups will be valid for
# both prior transactions and several dozen future transactions.
#keypool=100
# Pay an optional transaction fee every time you send bitcoins. Transactions with fees
# are more likely than free transactions to be included in generated blocks, so may
# be validated sooner.
#paytxfee=0.00
# Allow direct connections for the 'pay via IP address' feature.
#allowreceivebyip=1
# User interface options
# Start Bitcoin minimized
#min=1
# Minimize to the system tray
#minimizetotray=1
any ideas how I can get a cointerra to solo mine would be appreciated thank you.
# bitcoin.conf configuration file. Lines beginning with # are comments.
# Network-related settings:
# Run on the test network instead of the real bitcoin network.
#testnet=0
# Connect via a socks4 proxy
#proxy=127.0.0.1:9050
##############################################################
## Quick Primer on addnode vs connect ##
## Let's say for instance you use addnode=4.2.2.4 ##
## addnode will connect you to and tell you about the ##
## nodes connected to 4.2.2.4. In addition it will tell ##
## the other nodes connected to it that you exist so ##
## they can connect to you. ##
## connect will not do the above when you 'connect' to it. ##
## It will *only* connect you to 4.2.2.4 and no one else.##
## ##
## So if you're behind a firewall, or have other problems ##
## finding nodes, add some using 'addnode'. ##
## ##
## If you want to stay private, use 'connect' to only ##
## connect to "trusted" nodes. ##
## ##
## If you run multiple nodes on a LAN, there's no need for ##
## all of them to open lots of connections. Instead ##
## 'connect' them all to one node that is port forwarded ##
## and has lots of connections. ##
## Thanks goes to [Noodle] on Freenode. ##
##############################################################
# Use as many addnode= settings as you like to connect to specific peers
#addnode=69.164.218.197
#addnode=10.0.0.2:8333
# ... or use as many connect= settings as you like to connect ONLY
# to specific peers:
#connect=69.164.218.197
#connect=10.0.0.1:8333
# Maximum number of inbound+outbound connections.
#maxconnections=
# JSON-RPC options (for controlling a running Bitcoin/bitcoind process)
# server=1 tells Bitcoin-QT to accept JSON-RPC commands.
server=1
# You must set rpcuser and rpcpassword to secure the JSON-RPC api
rpcuser=user
rpcpassword=pass
# How many seconds bitcoin will wait for a complete RPC HTTP request.
# after the HTTP connection is established.
#rpctimeout=30
# By default, only RPC connections from localhost are allowed. Specify
# as many rpcallowip= settings as you like to allow connections from
# other hosts (and you may use * as a wildcard character).
# NOTE: opening up the RPC port to hosts outside your local
# trusted network is NOT RECOMMENDED, because the rpcpassword
# is transmitted over the network unencrypted.
#rpcallowip=10.1.1.34
#rpcallowip=192.168.1.*
# Listen for RPC connections on this TCP port:
rpcport=8332
# You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind
# running on another host using this option:
rpcconnect=127.0.0.1
# Use Secure Sockets Layer (also known as TLS or HTTPS) to communicate
# with Bitcoin -server or bitcoind
# rpcssl=1
# OpenSSL settings used when rpcssl=1
#rpcsslciphers=TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH
#rpcsslcertificatechainfile=server.cert
#rpcsslprivatekeyfile=server.pem
# Miscellaneous options
# Set gen=1 to attempt to generate bitcoins
gen=1
# Pre-generate this many public/private key pairs, so wallet backups will be valid for
# both prior transactions and several dozen future transactions.
#keypool=100
# Pay an optional transaction fee every time you send bitcoins. Transactions with fees
# are more likely than free transactions to be included in generated blocks, so may
# be validated sooner.
#paytxfee=0.00
# Allow direct connections for the 'pay via IP address' feature.
#allowreceivebyip=1
# User interface options
# Start Bitcoin minimized
#min=1
# Minimize to the system tray
#minimizetotray=1
any ideas how I can get a cointerra to solo mine would be appreciated thank you.
Jump to: