SoloMining setup linux | Bitcointalksearch.org

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: greenuser on March 02, 2016, 05:29:44 PM

As i understand, No one Solo mines without depending / trusting a 3rd party (pool) of some description. You cannot mine independently. Therefore the system is not truly decentralised. Someone always owns your ass. This is an issue i am also working on.
https://bitcointalksearch.org/topic/m.14076144
If it is possible, Huh

? sill unsure? then this forum could benefit from a good “How to Solo Mine 2016” thread.
IF I get mine to work, I will post such a thread.

No, the person who started this thread is successfully mining solo but they run linux. See below:

Quote from: bitmine49 on March 01, 2016, 10:52:37 AM

I have installed configured and successfully connected to ckpool on my node. Mining has begun. Thank you for pointing me in the right direction.

greenuser

sr. member

Activity: 364

Merit: 250

Marie Curie, 2 x Nobel Prizes Physics & Chemistry

As i understand, No one Solo mines without depending / trusting a 3rd party (pool) of some description. You cannot mine independently. Therefore the system is not truly decentralised. Someone always owns your ass. This is an issue i am also working on.
https://bitcointalksearch.org/topic/m.14076144
If it is possible, Huh

? sill unsure? then this forum could benefit from a good “How to Solo Mine 2016” thread.
IF I get mine to work, I will post such a thread.

bitmine49

newbie

Activity: 56

Merit: 0

Should a bitcoind in a ckpool standalone configuration be set to generate coins?

bitmine49

newbie

Activity: 56

Merit: 0

-ck

I have installed configured and successfully connected to ckpool on my node. Mining has begun. Thank you for pointing me in the right direction.

Best,

sp

bitmine49

newbie

Activity: 56

Merit: 0

Cool - Thank you very much for clearing that up. No wonder I could not connect the dots.

So basically try to get CKPool setup and then I can use my S7 and bitcoind node to mine for those ever elusive blocks.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: bitmine49 on February 29, 2016, 02:49:25 PM

in an effort to minimize the time I am banging my head with this: S7 Antminer looks like there is no support for this hardware w. cgminer.

Don't get led up the garden path. Cgminer is installed on the S7 itself already and is what mines. You do not need to download another copy of cgminer to get it working. What I was saying is that the cgminer included in the S7 is a non-standard one created by bitmain and it may not be capable of solo mining - that's what I was trying to say (since cgminer is normally capable of mining to a bitcoind node). Your most reliable way to ensure that you -can- solo mine since you are on linux is to download ckpool and create a mini pool on the linux box that has bitcoind and point your S7 at that. See my signature for links to the ckpool software.

bitmine49

newbie

Activity: 56

Merit: 0

in an effort to minimize the time I am banging my head with this: S7 Antminer looks like there is no support for this hardware w. cgminer.

bitmine49

newbie

Activity: 56

Merit: 0

IF my miner is sitting in a different network than my bitcoind/cgminer server - how do I get cgminer to connect to the hardware.

just read through cgminer README - How can I connect a IP / network based miner. cgminer is autodiscovery for USB devices.

And how does cgminer communicate with the bitcoind node - if on same machine.

"Single Pool
cgminer -o http://pool:port -u username -p password"

Is this above command for cgminer to connect to my S7? What username/password should I be using. Does not look like cgminer is aware of rpcusername/password on bitcoind.

Sorry if questions sound stupid still not clear how these tools work together.

1 - S7 Miner URL,Username/Password: should be?
2- cgminer setting for:
a) connection to bitcoind?
b) accept incoming from S7?

bitmine49

newbie

Activity: 56

Merit: 0

Will give it a go. Thanks

so point miner -> cgminer (point cgminer) -> to bitcoind? Is rpcallowip still necessary for miner IP?

Am I still using rpcuser/rpc password if pointing miner to cgminer? or should i use username (wallet address) and no password?

Thanks,

Traderbtcc

full member

Activity: 1190

Merit: 123

★Bitvest.io★ Play Plinko or Invest!

Downdload cgminer for linux

icanscript

hero member

Activity: 686

Merit: 502

Quote from: bitmine49 on February 29, 2016, 10:41:13 AM

so you don't mine (with my S7 miner) directly pointed to a node?

How does cgminer and bitcoind communicate?

CGMINER recognises your hardware S7, Then you point CGMiner at bitcoind and the S7 will mine through CGMiner

CGMiner controller should be connected to the S7 so that they can see eachother

(I dont have an s7, do dont know the full setup)

bitmine49

newbie

Activity: 56

Merit: 0

so you don't mine (with my S7 miner) directly pointed to a node?

How does cgminer and bitcoind communicate?

icanscript

hero member

Activity: 686

Merit: 502

Quote from: bitmine49 on February 29, 2016, 09:42:39 AM

Do I need cgminer installed? I do not.

I can confirm that my bitcoin node is listening on 8332

Antminer setting
URL: http://miner.domain.com:8332
User: rpcuser
Passoword:rpcpassword

conf file looks like

rpcallowip = x.x.x.x/24
rpcallowip = x.x.x.x/28
rpcallowip = x.x.x.x/29
rpcallowip = x.x.x.x/24

rpcuser=bitcoinrpc
rpcpassword=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

maxconnections = 10
server = 1
rpctimeout = 30
rpcport = 8332

CGMiner is the mining software, the box wont mine on its own.

You need to download CGMiner for whatever dist (Usually Linux is more stable) and point it at your miner with the correct settings

bitmine49

newbie

Activity: 56

Merit: 0

Do I need cgminer installed? I do not.

I can confirm that my bitcoin node is listening on 8332

Antminer setting
URL: http://miner.domain.com:8332
User: rpcuser
Passoword:rpcpassword

conf file looks like

rpcallowip = x.x.x.x/24
rpcallowip = x.x.x.x/28
rpcallowip = x.x.x.x/29
rpcallowip = x.x.x.x/24

rpcuser=bitcoinrpc
rpcpassword=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

maxconnections = 10
server = 1
rpctimeout = 30
rpcport = 8332

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: bitmine49 on February 28, 2016, 11:00:28 AM

if I enter url: node.mydomain.com:8332 it appends stratum info.

Bitcoin nodes do not do stratum, only pools do. You have to specify http:// with the address if you're really planning to solo mine so that cgminer knows it's looking for a http rpc mining port. That said, I have no idea if the bitmain cgminer forks have all the code from the current master cgminer to properly mine solo, nor if the controller in them is powerful enough to work properly.

icanscript

hero member

Activity: 686

Merit: 502

Quote from: bitmine49 on February 28, 2016, 11:00:28 AM

I am having problems getting a good connection with my s7 to a full node I just setup on ubuntu.

The node is online and working. I have the entire chain downloaded, and sent some payments to the local wallet. All good. Saw confirmations on the block for the transactions.

But I cannot get my miner to connect. What am i missing? Status dead. I have opened 8333 for node and 8332 for mine on firewall. Node is sitting begind NAT.

- rpcallowip has the remote isp range that the miner is coming from /28 network.

my bitconin.config only has rpcuser/password and rpcallowip configured. Am I missing anything?

from the antminer gui:

URL: http://node.mydomain.com:8332 worker is rpcuser/password

if I enter url: node.mydomain.com:8332 it appends stratum info. Do I need bfgminer?

Any pointers in the right direction would be appreciated. Been struggling with this for a few days now.

Thanks in adv.

Did you give the rpcallowip a mask notation.... so x.x.x.x/32 or w/e.

I have heard of problems with rpcallowip on other connections, may be best to sort out port triggering on router side.

or remove rpcallowip altogether... somepeople use rpcallowip=* or rpcallowip=all (not good practice) but worth it for a test.

bitmine49

newbie

Activity: 56

Merit: 0

I am having problems getting a good connection with my s7 to a full node I just setup on ubuntu.

The node is online and working. I have the entire chain downloaded, and sent some payments to the local wallet. All good. Saw confirmations on the block for the transactions.

But I cannot get my miner to connect. What am i missing? Status dead. I have opened 8333 for node and 8332 for mine on firewall. Node is sitting begind NAT.

- rpcallowip has the remote isp range that the miner is coming from /28 network.

my bitconin.config only has rpcuser/password and rpcallowip configured. Am I missing anything?

from the antminer gui:

URL: http://node.mydomain.com:8332 worker is rpcuser/password

if I enter url: node.mydomain.com:8332 it appends stratum info. Do I need bfgminer?

Any pointers in the right direction would be appreciated. Been struggling with this for a few days now.

Thanks in adv.

Topic: SoloMining setup linux (Read 1309 times)