I'm having a similar issue. Windows 7. New, never run miner system. Loaded Qt, wallet, mining pool etc...
If I put one USB miner in the hub it's fine. If I load all 5 then turn it on. Device drivers sees them all, only three light up, and I get COM errors and nothing runs. I've tried swapping ports around. Nothing. It's Anker 3.0, 9 port Hub. It should be able to handle it. No?
Should I load the one. Get it running. Then start plugging in one at a time?
Thanks in advance!
-Mark-
Topic: [Solved] BE - Anker hub - windows 7 (Read 1350 times)
After messing with it a bunch. I updated the systems root usb drivers. Ran windows update and then cleaned up all the installed usb devices and reinstalled them all one at a time. Now the Anker hubs are finally recognizing the Block erupters. Now they all seem to be working perfectly.
Problem is solved. If anyone else has this issue, I will be glad to help out the best I can.
Problem is solved. If anyone else has this issue, I will be glad to help out the best I can.
[Solved]
Had my anker hubs running on windows xp fine. put windows 7 on my pc , i have a cheap 10 port hub with 2 anker hubs connected to it. the block erupters show up fine on the cheap hub, but they are unrecognized on the anker hubs. if i plug the anker hubs into the pc, still not recognized.
set up worked fine when xp was loaded on the pc. any ideas?
Had my anker hubs running on windows xp fine. put windows 7 on my pc , i have a cheap 10 port hub with 2 anker hubs connected to it. the block erupters show up fine on the cheap hub, but they are unrecognized on the anker hubs. if i plug the anker hubs into the pc, still not recognized.
set up worked fine when xp was loaded on the pc. any ideas?
Jump to: