[Solved]0.1 btc bounty for helping setup minepeon and edimax wifi adapter

peontky

newbie

Activity: 1

Merit: 0

Quote from: 2weiX on July 01, 2013, 11:01:07 AM

nope, no dice.
/etc/network/interfaces either doesnt exist or I'm not allowed to change it (despite sudo).
putting wheezy on my SD and starting over.

this for minepeon on the raspberry pi.

oh yes the wifi dongle. easy an effective ay to get it to work

sudo wicd-curse
--> configure
shift p

key/password
f10
shift r
shift C after connection
when connected the ip address is the dongles static ip that in the shift p window .
next reboot start putty and remember the ip address connect from the dongle ip address and it should workithai
static ip the dongle

donate , look out, 1DtZPN2y2phnDj54s3WMmTx1TE29wPNFjp show some love or not enjoy. Roll Eyes

sephtin

newbie

Activity: 47

Merit: 0

Here's a more complete guide to getting WiFi going on rPi (Sorry if there's any bad blood between here and there... but it's a good howto):
https://forums.butterflylabs.com/showwiki.php?title=Tutorials:Raspberry+Pi+-+Mining+with+MinePeon&viewfull=1&page=4&do=comments#post38317

And, all I did to install ntp was:
$ sudo pacman -S ntp

it asked to uninstall openntpd, installed ntp, and after a reboot, time sync was resovled.

HTH!

sephtin

newbie

Activity: 47

Merit: 0

Glad to hear you're working.

I might also mention that after I got this working via Wicd, I had issues with the time not syncing properly.
There are two ways to fix:
Create config files for networking (I didn't want to do this), or install ntpd (will ask to remove openntpd). After installing ntpd and rebooting, time sync worked again. I'll try to find the link to the post I followed to fix this, and edit it into this post when I get a few minutes...

SoggyLettuce

full member

Activity: 238

Merit: 100

Edit: It was my wireless keyboard. Plugged in a wired one and the f10 worked.

SoggyLettuce

full member

Activity: 238

Merit: 100

I also seem to be having this problem but I when i hit f10 nothing happens so I can't actually save the entered password.

Any help? .02 bounty if you help me out and it works.

sephtin

newbie

Activity: 47

Merit: 0

Quote from: 2weiX on July 01, 2013, 11:01:07 AM

nope, no dice.
/etc/network/interfaces either doesnt exist or I'm not allowed to change it (despite sudo).
putting wheezy on my SD and starting over.

The reason it won't let you edit it, is because the /etc/network folder doesn't exist by default.
I didn't have to do anything in the guide anyway.
The Wicd tool is included with the MinePeon dist. (At least it is on 0.2.2), and worked fine for me.

I didn't follow the guide mentioned previously. Instead, once logged in, I ran
$ sudo wicd-curses
P for prefs, set the Wireless Interface to wlan0, then hit F10 to save.
R for refresh to scan for wifi networks.
select your netowrk, and hit the right arrow to configure settings. Then F10 to save.
Again select your netowrk (now configured), and hit C to connect.

The status at the bottom of the screen showed it connect, authenticate, get an IP, and then show a status of "Connected".

Hope that's helpful.
If this has helped, feel free to send a tip my way:
16vhugBL181T63nHgWmntPKLGnWoNykxwc

Edit: Fixed/clarified/accuracy.

2weiX

legendary

Activity: 2058

Merit: 1005

this space intentionally left blank

Quote from: Maidak on July 01, 2013, 05:22:42 PM

Quote from: 2weiX on July 01, 2013, 11:01:07 AM

nope, no dice.
/etc/network/interfaces either doesnt exist or I'm not allowed to change it (despite sudo).
putting wheezy on my SD and starting over.

You need to create that file if you need help with it send me a PM.

switched to wheezy.
will have time to tinker tomorrow night.

Maidak

legendary

Activity: 1890

Merit: 1058

Vave.com - Crypto Casino

Quote from: 2weiX on July 01, 2013, 11:01:07 AM

nope, no dice.
/etc/network/interfaces either doesnt exist or I'm not allowed to change it (despite sudo).
putting wheezy on my SD and starting over.

You need to create that file if you need help with it send me a PM.

2weiX

legendary

Activity: 2058

Merit: 1005

this space intentionally left blank

nope, no dice.
/etc/network/interfaces either doesnt exist or I'm not allowed to change it (despite sudo).
putting wheezy on my SD and starting over.

Maidak

legendary

Activity: 1890

Merit: 1058

Vave.com - Crypto Casino

the one I included is the last one you need to do.

2weiX

legendary

Activity: 2058

Merit: 1005

this space intentionally left blank

exactly WHEN is that step needed?

will try this out tonight and then, depending on my success, send an amount^^

Maidak

legendary

Activity: 1890

Merit: 1058

Vave.com - Crypto Casino

Quote from: 2weiX on June 30, 2013, 03:51:39 PM

I'll share half the bounty with you if you post a how-to.

http://www.savagehomeautomation.com/projects/raspberry-pi-installing-the-edimax-ew-7811un-usb-wifi-adapte.html

I followed this then the one thing that was missed was do sudo wicd-curses and then go to prefs and type in wlan0 in the wireless interface scan for network and then you can connect thats the one thing that guide did not add in there that I couldn't figure out for a while.

btc address: 1ygK6etjeNUjpv7FFKv6UZJcSPxuunuKq

Wink

2weiX

legendary

Activity: 2058

Merit: 1005

this space intentionally left blank

I'll share half the bounty with you if you post a how-to.

Maidak

legendary

Activity: 1890

Merit: 1058

Vave.com - Crypto Casino

Contact my live chat support on www.mmoclub.com if you can help me set this up so i can move all my miners next to my window air also i'll add another 0.05 btc if you can show me how to set it up to use the --failover only option for pooled mining

Solved

Topic: [Solved]0.1 btc bounty for helping setup minepeon and edimax wifi adapter (Read 3640 times)