Cool these look like good units. I just asked for a quote.
Mind if I ask what you paid for them?
Also - just a general question for PDUs: My power source is three phase but I will be running the PDU's off single phase L-L of 230 V. For a PDU with input voltage requirement of 230V, does it matter if it is L-L voltage or L-N?
Thanks
Topic: Some PDU Part#'s (Read 267 times)
The ones I got were
Server Technologies Sentry Switched Cabinet Distribution Unit CDU CW-8H2-L30M
Server Technologies Sentry Switched Cabinet Distribution Unit CDU CX-8H2-L30M
The CW is the master, and the CX uses a 6-pin telephone cord to connect to the master. So 12 switched plugs on two CDU (two 30A circuits) that are controlled from the one web interface.
Server Technologies Sentry Switched Cabinet Distribution Unit CDU CW-8H2-L30M
Server Technologies Sentry Switched Cabinet Distribution Unit CDU CX-8H2-L30M
The CW is the master, and the CX uses a 6-pin telephone cord to connect to the master. So 12 switched plugs on two CDU (two 30A circuits) that are controlled from the one web interface.
Thanks for this Raymond, I have been thinking the exact same thing - most PDU's aren't meant for ASICs.
I'm also interested in learning the part # for the above mentioned switched PDU's. Speaking of switched PDU's, have you encountered any really good deals on switched PDU's that are suitible for ASICs?
Cheers
I'm also interested in learning the part # for the above mentioned switched PDU's. Speaking of switched PDU's, have you encountered any really good deals on switched PDU's that are suitible for ASICs?
Cheers
I have not found any "affordable" switched PDUs yet. Most command a premium, I am still looking though. I work with an APC and a Vertiv reseller I am waiting to hear back on what they can find. I need to ping them again.
Sounds good. If you find good prices on PDU's that are suitable for 30A +, keep me posted, I may be in the market for a significant amount (especially if we can find low-cost switched PDU's).
At my previous location I used a pair of Tripp-Lite 30amp power strips to run (8) S9s - (4) per strip, (2) per side of each strip. Over about a year, I popped one of the 20amp internal breakers once. Never had any problems on the panel breaker. These were, of course, maxed.
Thanks for this Raymond, I have been thinking the exact same thing - most PDU's aren't meant for ASICs.
I'm also interested in learning the part # for the above mentioned switched PDU's. Speaking of switched PDU's, have you encountered any really good deals on switched PDU's that are suitible for ASICs?
Cheers
I'm also interested in learning the part # for the above mentioned switched PDU's. Speaking of switched PDU's, have you encountered any really good deals on switched PDU's that are suitible for ASICs?
Cheers
I have not found any "affordable" switched PDUs yet. Most command a premium, I am still looking though. I work with an APC and a Vertiv reseller I am waiting to hear back on what they can find. I need to ping them again.
Thanks for this Raymond, I have been thinking the exact same thing - most PDU's aren't meant for ASICs.
I'm also interested in learning the part # for the above mentioned switched PDU's. Speaking of switched PDU's, have you encountered any really good deals on switched PDU's that are suitible for ASICs?
Cheers
I'm also interested in learning the part # for the above mentioned switched PDU's. Speaking of switched PDU's, have you encountered any really good deals on switched PDU's that are suitible for ASICs?
Cheers
I got some by server technology, they're great. I can log in and toggle plugs, monitor power. Paid about $60 from some surplus place, very happy with the purchase
Wow, very nice to get switched outlets for $60.00! Have any part numbers?
I got some by server technology, they're great. I can log in and toggle plugs, monitor power. Paid about $60 from some surplus place, very happy with the purchase
I know a lot of folks pick up PDUs off eBay, so I thought I'd post some search fodder for the new folks. Surely someone will search before posting right? Yeah I'm optimistic 
Anyway what got me looking around is that most PDUs are not very well suited for ASIC miners. You might buy a 30A PDU, but look at it carefully. Most of the time each bank of outlets is protected by a 15A breaker. So 2 S9s will put you over the 80% derating recommendation and pretty close to the cap, I haven't measure S9 inrush. Use something like a Pangolin M3 and you're down to 1 miner per outlet bank.
Now I am sure there's folks running these 15A/bank PDUs with no issues, but it's too close for me. By doing some digging I found APC part # AP6031A (Dell branded Dell AP6031), which seems perfect for ASICs. 30A total (24A derated), 4 outlets @ 12A each derated. The form factor of this PDU is also a lot smaller so you don't have giant PDUs with a bunch of wasted outlets.
Thought I'd share.
Anyway what got me looking around is that most PDUs are not very well suited for ASIC miners. You might buy a 30A PDU, but look at it carefully. Most of the time each bank of outlets is protected by a 15A breaker. So 2 S9s will put you over the 80% derating recommendation and pretty close to the cap, I haven't measure S9 inrush. Use something like a Pangolin M3 and you're down to 1 miner per outlet bank.
Now I am sure there's folks running these 15A/bank PDUs with no issues, but it's too close for me. By doing some digging I found APC part # AP6031A (Dell branded Dell AP6031), which seems perfect for ASICs. 30A total (24A derated), 4 outlets @ 12A each derated. The form factor of this PDU is also a lot smaller so you don't have giant PDUs with a bunch of wasted outlets.
Thought I'd share.
Jump to: