Author

Topic: Some questions about block erupter usb (Read 956 times)

sr. member
Activity: 280
Merit: 250
June 19, 2013, 08:25:43 AM
#11
thermometer is not necessary.
I blow air to usb block erupter with a 14 cm fan.
It is enough to cool the usb miner to about 40 degrees centigrade.
hero member
Activity: 532
Merit: 500
June 19, 2013, 08:12:07 AM
#9
what is the cheapest thermometer-tool you can buy to somewhat reliably measure their chip temperatures?

The one you buy on eBay...
hero member
Activity: 532
Merit: 500
bearded, drunk, fat, naked
June 19, 2013, 08:10:54 AM
#8
what is the cheapest thermometer-tool you can buy to somewhat reliably measure their chip temperatures?
sr. member
Activity: 299
Merit: 250
June 19, 2013, 03:07:12 AM
#7
I had stability issues when running USB eruptors without a fan: hashrate in cgminer started to drop after a few days. The arctic breeze usb fan is perfect for cooling the block eruptors, and it does lower HW error rate by about 0.2%
PeZ
sr. member
Activity: 297
Merit: 250
June 18, 2013, 07:29:19 PM
#6
If you point an Arctic breeze mobile USB fan at it, it will reduce your hardware error rate slightly and perhaps increase its lifespan.
sr. member
Activity: 452
Merit: 250
June 18, 2013, 05:40:59 PM
#5
More than a week without a fan. No problem.

GPUs can run at 95C all day long too, doesn't mean it's a good idea  Undecided
sr. member
Activity: 406
Merit: 250
ALGORY.io Crowdsale starts on 8/12/2017
June 18, 2013, 05:09:38 PM
#4
More than a week without a fan. No problem.
sr. member
Activity: 452
Merit: 250
June 18, 2013, 04:54:40 PM
#3
Block Erupter USBs do not have a temperature sensor, but I would recommend active cooling to keep the chips happy. The stock aluminum plate is enough if you have airflow going over it to keep it relatively cool.
hero member
Activity: 729
Merit: 500
June 18, 2013, 04:27:11 PM
#2
It has a flat heatsink connected to it already.  Some people have fans that blow on theirs.  I don't, and they work fine.  They DO get really hot, but it doesn't impact their function.  I imagine Asicminer would have put a better heatsink on them if they thought they would just burn out if people didn't put fans on them.

I've been running them for a couple weeks or more now, 24 hours a day without any issues.  But getting a small fan to blow air on them isn't a bad idea.  It's all you really need.
member
Activity: 86
Merit: 10
June 18, 2013, 03:39:43 PM
#1
1. It is possible check temperature using cgminer or any software? And if yes, how? Ar I need external thermometer?
2. What heatsink you recommend? And how to fitted it?
3. What cooler you recommend?
 Most important question is number 1.
 Thank You very much!
Jump to: