Someone to help me build Storage Server

Bitsky

hero member

Activity: 576

Merit: 514

Quote from: takagari on December 25, 2013, 09:46:09 PM

Zfs for sure. But should Ingo with a single card. Like mentioned above. If I ever want more than 24 I could just add another card.

Or should I got with 3 8 porters to spread risk?

3x 8 ports should be cheaper than 1x 24 ports. I'd buy a spare controller and disk too.
Maybe port multipliers would be worth a try, but they split up the bandwidth of the port.

takagari

legendary

Activity: 1050

Merit: 1000

Quote from: Bitsky on December 25, 2013, 05:42:09 PM

Quote from: infinitybo on December 25, 2013, 05:44:58 AM

Sure by default nothing is guarantee in life such a job, money, BTC and else anyways he wanted to be certain about his RAID 5 setup so about this, he can transfer data ~~stuff~~ using the Areca ARC-1880ix-24-4G controller without any data failures.

I hope you're not serious. A raid5 array with 24 drives? You're just asking for data loss.

Zfs for sure. But should Ingo with a single card. Like mentioned above. If I ever want more than 24 I could just add another card.

Or should I got with 3 8 porters to spread risk?

Bitsky

hero member

Activity: 576

Merit: 514

Quote from: infinitybo on December 25, 2013, 05:44:58 AM

Sure by default nothing is guarantee in life such a job, money, BTC and else anyways he wanted to be certain about his RAID 5 setup so about this, he can transfer data ~~stuff~~ using the Areca ARC-1880ix-24-4G controller without any data failures.

I hope you're not serious. A raid5 array with 24 drives? You're just asking for data loss.

infinitybo

newbie

Activity: 28

Merit: 0

DDR3 for areca ARC-1882ix-24-4G is available with latest version of firmware 1.52 2013/12/11 ~~1.52 2013/8/29~~ ~~for the ARC-1880 series~~ by the way @Takagiri here what you wanted on newegg.ca.

Atruk

hero member

Activity: 700

Merit: 500

Quote from: Rannasha on December 23, 2013, 02:18:21 PM

With so many drives the chance of bitrot is very high. I would definitely use a ZFS-based setup.

This, so much this.

I could not imagine handling multi-terabyte datastores without ZFS these past several years. Some types of RAID may have performance cases supporting them, but RAID is a fickle technology that requires a lot of attention to detail. If you just need to mainatin a big archive and protect it from corruption though ZFS is the way to go.

infinitybo

newbie

Activity: 28

Merit: 0

Sure by default nothing is guarantee in life such a job, money, BTC and else anyways he wanted to be certain about his RAID 5 setup so about this, he can transfer data ~~stuff~~ using the Areca ARC-1880ix-24-4G controller without any data failures.

Bitsky

hero member

Activity: 576

Merit: 514

Quote from: takagari on December 24, 2013, 10:24:37 AM

Hot swap yes, but I'm more concerned about expandability?

After you have replaced all drives in a zfs pool, you can expand it to the new size.

Quote from: crankmonkey on December 24, 2013, 04:18:28 PM

or even more specifically this post here
http://www.reddit.com/r/DataHoarder/comments/1tfepd/52tb_raw_64tb_of_hard_disks_file_server_build/

Windows? Seriously?

And just because it has not been mentioned yet: hardware raid does not guarantee data integrity by default.
Furthermore, your controller is a single point of failure. In case it goes down, there's a chance that it will take down all your data too.
You can't just stuff in another controller and expect everything to work again. Some suggest to keep an identical spare controller, even with the same firmware version.

takagari

legendary

Activity: 1050

Merit: 1000

I'll look that over thanks

Trick with the wife.. She like's movie's, a majority of this server host's HD movies accessible from any TV in the house. I actually have a "Wife" folder... All shit she like's and I avoid lol

The rest if mine lol

crankmonkey

newbie

Activity: 40

Merit: 0

you might wanna check out several reddits
http://www.reddit.com/r/DataHoarder/
or
http://www.reddit.com/r/homelab/
or even more specifically this post here
http://www.reddit.com/r/DataHoarder/comments/1tfepd/52tb_raw_64tb_of_hard_disks_file_server_build/

good luck, i just wish the wife would let me build one myself Sad

infinitybo

newbie

Activity: 28

Merit: 0

Everything is going to be alright with your existing Raid 5 so don't worry, you can ghost the main without any problem.

takagari

legendary

Activity: 1050

Merit: 1000

Hot swap yes, but I'm more concerned about expandability?

Right now I need about 20TB of storage, but am aware this will expand rapidly. So I'd like the ability to slap in new HDD's, something like Raid 5 is fine. Just need to know I won't dump the whole server over 1 drive.

Eventually I'll have a second identical box in an out building via LAN to ghost the main.

nachius

hero member

Activity: 546

Merit: 500

Another +1 for FreeNAS here!

infinitybo

newbie

Activity: 28

Merit: 0

Depending on your RAID setup so as you asked something like RAID 1 therefore it does or JBOD for maximum configuration, and yes you can hot swap.

takagari

legendary

Activity: 1050

Merit: 1000

Quote from: infinitybo on December 23, 2013, 01:27:46 PM

My suggestion : ~~newegg.ca but out of stock~~ or available here in Canada.

You are welcome Takagari

Thanks for that. Hmmm. Will that just jbod? And use the file system and does a card like that allow hot expansion?

Rannasha

hero member

Activity: 728

Merit: 500

With so many drives the chance of bitrot is very high. I would definitely use a ZFS-based setup.

Bitsky

hero member

Activity: 576

Merit: 514

Hook up all your drives and use an OS with ZFS support, like FreeNAS. Depending on how important your data is, use a Z3 instead of a Z2 raid. ZFS likes RAM, so stick in 8GB or more.

infinitybo

newbie

Activity: 28

Merit: 0

My suggestion : ~~newegg.ca but out of stock~~ or available here in Canada.

You are welcome Takagari

takagari

legendary

Activity: 1050

Merit: 1000

I'm wanting to build a storage server from a Norco 4224 4U server case.

These can hold 24 Sata hard drive's.
I would run a small SSD for the OS drive on the inside.

Considering running this in a cloned raid setup. Raid 1 I believe? But want something I can expand on the fly, I.E. drop two more 4TB hard drive's in and it expands.

Sadly I need help with the most economical way to do this, HW raid would be best, know of a card that will do this on 24 cards?

Would be willing to give someone a $20 donation or such to help me out with this, I'm sure many of you can just make a prt's list up on the fly.

Preferably newegg.ca, ncix.com, tigerdirect.com for part's as I am Canadian.

Expansion is key

Thank You

Topic: Someone to help me build Storage Server (Read 1273 times)