Something like a Raspberry Pi .. but with cpu power ?

PeZ

sr. member

Activity: 297

Merit: 250

Quote from: ocminer on May 31, 2013, 02:38:25 PM

A beagleboard is too expensive, could also buy an eee pc for that.. But maybe someone has an other idea ?

A $45 Beaglebone Black?

Why don't you buy a bunch of Pi's instead of trying to run everything off of one? A Cubie is more powerful but it's just another small slow CPU that is overpriced.

jspielberg

sr. member

Activity: 490

Merit: 255

I think the samsung google chromebook has USB3 and you install an alternate linux. And for $250 it includes it own uninterruptible power supply (well... 10 hour battery or some such).

Some details:
http://forums.debian.net/viewtopic.php?f=16&t=103468

Looks like USB3 is supported at least for an external hard drive.

fpgaminer

hero member

Activity: 560

Merit: 517

Slightly on-topic: I'm also looking for a "replacement" for my Raspberry Pi. One of my RasPi's was supposed to run some Block Erupter sticks, but she choked on the USB 3.0 hub. Does anyone know if BeagleBone Black's SoC has better USB support? I tried a little Googling but came up inconclusive. Or perhaps the Allwinner A10 SoC (used in Cubie, for example) has better USB support?

turtle83

sr. member

Activity: 322

Merit: 250

Supersonic

in case it helps... i use

Code:

cgminer --queue=5 --syslog

Dont think that should matter....

Try out my binary and let me know if that helped. Maybe some library you have installed sucks more CPU than it should... If my .deb also sucks cpu, i could give u a dump of each package version i have installed, and then u can compare with yours...

ocminer

legendary

Activity: 2688

Merit: 1240

I'm using openvpn as the board is not at home and thats the way it connects into my lan.
But openvpn is not the reason for the cpu usage.

It has got 512 MB RAM, only 45 are used though..

turtle83

sr. member

Activity: 322

Merit: 250

Supersonic

Quote from: ocminer on May 31, 2013, 04:56:46 PM

Also no GUI or anything.. just a naked "wheezy" with openvpn and cgminer 3.2.0..

I compiled it myself directly on the pi.. disabled anything but ztex fpga's ..

Hmm, I'll try your binary.. Strange..

And... also how much memory does your system have? Have u tuned the amount of memory allocated for GPU? Maybe if its starved of memory cgminer needs to do more stuff? Just speculating...

FlappySocks

hero member

Activity: 546

Merit: 500

Quote from: ocminer on May 31, 2013, 04:56:46 PM

Also no GUI or anything.. just a naked "wheezy" with openvpn and cgminer 3.2.0..

Openvpn? I just use ssh & byobu

cp1

hero member

Activity: 616

Merit: 500

Stop using branwallets

Why do you use openvpn and not ssh?

MWNinja

hero member

Activity: 630

Merit: 500

Beaglebone Black is cheaper (overall cost) and faster than the Raspberry Pi (it has eMMC flash, so a uSD card isn't required, except for reflash). I'm not sure what kind of limits it has, I am currently running 6 cairnsmore1 boards with it, and will soon add 5 of the ASICMiner USB devices.

The Pi tends to run quite a bit hotter in my experience. Still I'm not sure why you would be seeing so much CPU load, perhaps try the Arch linux mining distro (minepeon) and see if that helps.

ocminer

legendary

Activity: 2688

Merit: 1240

Also no GUI or anything.. just a naked "wheezy" with openvpn and cgminer 3.2.0..

I compiled it myself directly on the pi.. disabled anything but ztex fpga's ..

Hmm, I'll try your binary.. Strange..

turtle83

sr. member

Activity: 322

Merit: 250

Supersonic

Quote from: ocminer on May 31, 2013, 04:47:48 PM

Quote from: turtle83 on May 31, 2013, 04:44:57 PM

Quote from: ocminer on May 31, 2013, 02:38:25 PM

Hey,

I'm using a rpi with some fpga boards but already hitting the limits of the ARM cpu with something around 10 boards.. Load is quite high even though it's already overclocked and cgminer usually uses us relatively low cpu.

Is there something (embedded) which is as easy to set up as an rpi but has more/enough cpu power ? A beagleboard is too expensive, could also buy an eee pc for that.. But maybe someone has an other idea ?

beaglebone black is for ~$45 - 50. Its for 20-30% more juice.

BTW which board do you run with pi? I run 10 ztex quads @20 - 25% cpu on pi model B

Hmm strange, me too... 10 ztex @ 70% CPU... Which version of cgminer are you using ? Any special options ? My system load is always around 0.70 - 0.75 ..

The load average is irrelavent, but 70% CPU sounds like a lot.

I used 3.1.0, 3.1.1 and currently on 3.2.0 all use similar CPU ... The binary i use is linked from my sig.

FWIW i use Raspbian Server Edition from http://sirlagz.net/2013/02/14/raspbian-server-edition-version-2-3/ and not running any fancy GUI things on it.

Are you using model A or B?

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: turtle83 on May 31, 2013, 04:44:57 PM

Quote from: ocminer on May 31, 2013, 02:38:25 PM

Hey,

I'm using a rpi with some fpga boards but already hitting the limits of the ARM cpu with something around 10 boards.. Load is quite high even though it's already overclocked and cgminer usually uses us relatively low cpu.

Is there something (embedded) which is as easy to set up as an rpi but has more/enough cpu power ? A beagleboard is too expensive, could also buy an eee pc for that.. But maybe someone has an other idea ?

beaglebone black is for ~$45 - 50. Its for 20-30% more juice.

BTW which board do you run with pi? I run 10 ztex quads @20 - 25% cpu on pi model B

Hmm strange, me too... 10 ztex @ 70% CPU... Which version of cgminer are you using ? Any special options ? My system load is always around 0.70 - 0.75 ..

turtle83

sr. member

Activity: 322

Merit: 250

Supersonic

Quote from: ocminer on May 31, 2013, 02:38:25 PM

Hey,

I'm using a rpi with some fpga boards but already hitting the limits of the ARM cpu with something around 10 boards.. Load is quite high even though it's already overclocked and cgminer usually uses us relatively low cpu.

Is there something (embedded) which is as easy to set up as an rpi but has more/enough cpu power ? A beagleboard is too expensive, could also buy an eee pc for that.. But maybe someone has an other idea ?

beaglebone black is for ~$45 - 50. Its for 20-30% more juice.

BTW which board do you run with pi? I run 10 ztex quads @20 - 25% cpu on pi model B

Trongersoll

hero member

Activity: 490

Merit: 501

Quote from: Bitcoinorama on May 31, 2013, 02:46:53 PM

Quote from: Trongersoll on May 31, 2013, 02:42:58 PM

how about a microATX Atom motherboard from intel. ASUS makes an AMD equivalent. Look on Amazon or tigerdirect or newegg. Basically it is a netbook without the stuff ya don't need. Uses about 40 watts and has all the interfaces ya need. pretty much a PC on a board.

Don't you mean mini-itx? Still needs to purchase processor etc.

yeah, mini, i was working from memory.

you need a low power PS, RAM, some kind of harddrive or usb dongle, monitor, keyboard and internet connection. I have one of these mining with one video card in the pci-e slot. the onboard video only did about 10Mh/s. If i remember right, there are like 10 usb ports on this. No separate CPU required: http://www.amazon.com/Asus-C60M1-I-SATA3-Motherboard-Combo/dp/B007ZT1FAI/ref=sr_1_2?ie=UTF8&qid=1370029898&sr=8-2&keywords=atom+motherboard

Intel: http://www.amazon.com/Intel-BOXD2500HN-Dual-Core-Mini-ITX-Motherboard/dp/B007BHTMX6/ref=sr_1_7?ie=UTF8&qid=1370029898&sr=8-7&keywords=atom+motherboard

FlappySocks

hero member

Activity: 546

Merit: 500

My E350 mini-itx uses about 30 watts. Makes a great Linux server, and plenty powerful enough.

Bitcoinorama

hero member

Activity: 532

Merit: 500

Quote from: Trongersoll on May 31, 2013, 02:42:58 PM

how about a microATX Atom motherboard from intel. ASUS makes an AMD equivalent. Look on Amazon or tigerdirect or newegg. Basically it is a netbook without the stuff ya don't need. Uses about 40 watts and has all the interfaces ya need. pretty much a PC on a board.

Don't you mean mini-itx? Still needs to purchase processor etc.

Trongersoll

hero member

Activity: 490

Merit: 501

how about a microATX Atom motherboard from intel. ASUS makes an AMD equivalent. Look on Amazon or tigerdirect or newegg. Basically it is a netbook without the stuff ya don't need. Uses about 40 watts and has all the interfaces ya need. pretty much a PC on a board.

ct1aic

hero member

Activity: 714

Merit: 500

Are ฿itcoins Radioactive?

Did you tried using a second RPI?

Xialla

legendary

Activity: 1036

Merit: 1001

/dev/null

what about this one?

http://cubieboard.org/

ocminer

legendary

Activity: 2688

Merit: 1240

Hey,

I'm using a rpi with some fpga boards but already hitting the limits of the ARM cpu with something around 10 boards.. Load is quite high even though it's already overclocked and cgminer usually uses us relatively low cpu.

Is there something (embedded) which is as easy to set up as an rpi but has more/enough cpu power ? A beagleboard is too expensive, could also buy an eee pc for that.. But maybe someone has an other idea ?

Topic: Something like a Raspberry Pi .. but with cpu power ? (Read 1971 times)