spondoolies-tech SP20 overclock | Bitcointalksearch.org

miguelmorales85

hero member

Activity: 544

Merit: 507

Quote from: philipma1957 on December 06, 2014, 12:14:14 PM

Quote from: vortexz on December 06, 2014, 06:03:36 AM

Hi.Can anyone tell me how to OC the SP20 ?
Just got 2 of them, took me 2 mins to configure them, excelent working pieces of hardware
I have 1 SP20 that is run by 2x 1000W PSUs, and I belive there is some room to OC this one
Can anyone tell me the exact stepts I need to do in order to OC ?
Thanks !

go to settings page set fan to 90
Speed

Set your starting voltage no more then 10 mv under your stable working voltage (from ASIC stats page)

Start Volts Unit 1(0.64-0.80) try .715

Start Volts Unit 2(0.64-0.80) try .715

Start Volts Unit 3(0.58-0.80) try .71

Start Volts Unit 4(0.58-0.80) try .71

Set your Maximum voltage to 0.790 for maximum mining or less for economy mode
Maximum Voltage (0.580-0.790) try .73

Set PSU power to 120 and let the system learn the actual PSU limit.
Max PSU Power Unit 1 (70W - 288W) try 235

Max PSU Power Unit 2 (70W - 288W) try 235

Max PSU Power Unit 3 (70W - 288W) try 235

Max PSU Power Unit 4 (70W - 288W) try 235

Save

check the asic stats page look for temps 115 and lower

If we talk about hashrate, what would be the result of these settings?
I have a EVGA 750w and a 850w 80 bronce PSU's.
Will this config assure me the most hashrate possible?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: vortexz on December 06, 2014, 06:03:36 AM

Hi.Can anyone tell me how to OC the SP20 ?
Just got 2 of them, took me 2 mins to configure them, excelent working pieces of hardware
I have 1 SP20 that is run by 2x 1000W PSUs, and I belive there is some room to OC this one
Can anyone tell me the exact stepts I need to do in order to OC ?
Thanks !

go to settings page set fan to 90
Speed

Set your starting voltage no more then 10 mv under your stable working voltage (from ASIC stats page)

Start Volts Unit 1(0.64-0.80) try .715

Start Volts Unit 2(0.64-0.80) try .715

Start Volts Unit 3(0.58-0.80) try .71

Start Volts Unit 4(0.58-0.80) try .71

Set your Maximum voltage to 0.790 for maximum mining or less for economy mode
Maximum Voltage (0.580-0.790) try .73

Set PSU power to 120 and let the system learn the actual PSU limit.
Max PSU Power Unit 1 (70W - 288W) try 235

Max PSU Power Unit 2 (70W - 288W) try 235

Max PSU Power Unit 3 (70W - 288W) try 235

Max PSU Power Unit 4 (70W - 288W) try 235

Save

check the asic stats page look for temps 115 and lower

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

you mayhave better luck in the actual spondoolies thread. generally speaking, you can do it two ways:
1) via the web interface - you can adjust the starting/max voltage and the peak power draw allowed per pcie connection (be careful over 250W, as you might burn up thiner wiring on some power supplies)
2) via ssh - this is more for in-depth tuning, and not for beginners

vortexz

legendary

Activity: 1120

Merit: 1001

you are most welcome, I am very happy with your miners
Can you let me know how to OC the chips ?

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: vortexz on December 06, 2014, 06:03:36 AM

... excelent working pieces of hardware ...

Thank you.

vortexz

legendary

Activity: 1120

Merit: 1001

Hi.Can anyone tell me how to OC the SP20 ?
Just got 2 of them, took me 2 mins to configure them, excelent working pieces of hardware
I have 1 SP20 that is run by 2x 1000W PSUs, and I belive there is some room to OC this one
Can anyone tell me the exact stepts I need to do in order to OC ?
Thanks !

Topic: spondoolies-tech SP20 overclock (Read 3044 times)