Author

Topic: Spotswood case 8 card build = nice (Read 348 times)

sr. member
Activity: 512
Merit: 250
full member
Activity: 350
Merit: 100
December 25, 2017, 01:29:17 AM
#10
You did an amazing job there Phil!

I have 5 of those boards coming - well the ones with 8 + 4 slots, so thinking I'm going to do 7 hybrids each on the board and 5 cards on risers. The 5 on risers I still have to figure out how those will be mounted but your pics are definitely giving me some ideas before the boards arrive so thanks again can't wait.
newbie
Activity: 14
Merit: 0
December 25, 2017, 12:51:24 AM
#9
wow....holy cow!

thanks for the share....my wheels are definitely spinning
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
December 25, 2017, 12:04:45 AM
#8
Damn I totally missed this board had the extra 1x PCIE ports giving a total of 12

What I like about this rig setup most is it will accommodate water cooled GPU's.... I wonder if he has other designs that would offer a similar configuration, it appears it just needs an additional fan/GPU tier above where they mount

Yeah the water blocks are quiet .

This is pretty  much the nicest rig I have built.

I could do

5 1080 tis
2  1070 tis
1 1050 ti no cables

Using the six pcie cables

It would do

4400 or 4500 sols with lite clocks on the 1080 tis

5x 165 = 825
2x105  = 210
1x60.   =   60

1095 which would be maybe 1300 on the kwatt
hero member
Activity: 952
Merit: 508
December 24, 2017, 11:46:26 PM
#7
Damn I totally missed this board had the extra 1x PCIE ports giving a total of 12

What I like about this rig setup most is it will accommodate water cooled GPU's.... I wonder if he has other designs that would offer a similar configuration, it appears it just needs an additional fan/GPU tier above where they mount
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
December 24, 2017, 11:13:46 PM
#6
yeah  it could do the 4 with ease.  even with my rubber feet and wooden lifts.

The rubber feet would protect the rig  from vibration if you wheel the big rack around.


28 inch wide  it would fit




put this fan on the psu  it has 4 rubber  feet it pulls air away from the  psu  which uses a heatsink and is warm to the touch this does cool the psu a bit.
velcro keeps it in place








I extended pcie cables to the far end 1080 ti

the cable runs under the mobo.



sr. member
Activity: 464
Merit: 301
December 24, 2017, 11:11:05 PM
#5
Okay nice with the wires..  this rack  should do 4 easy  and it is on wheels


https://www.ebay.com/itm/60-x30-x14-Heavy-Duty-5-Tier-Layer-Wire-Shelving-Rack-Adjustable-Steel-Shelf/152286251017?
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
December 24, 2017, 10:59:28 PM
#4
@ yankees

I would want a taller rack.
I added  some feet and a piece of wood on each side to give some height under mobo to hide the wires.

I will post photos


left side with psu   you can see spotswood's black fee included.
I put rubber cups for height then a piece of 1.5 by 1.5 wood



right side with msi seahawk



The underbelly   

at the moment  4 pcie cables go under as does the cpu cable and the  6 molex+sata cables
sr. member
Activity: 464
Merit: 301
December 24, 2017, 10:57:25 PM
#3
So 28 inch wide and 16 inches deep.  Does that  mean  this rack from target  could hold 3 of them


https://www.target.com/p/adjustable-3-tier-wide-wire-shelving-chrome-room-essentials-153/-/A-17136152?lnk=rec|slp|search_bought|slp|17136152|3
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
December 24, 2017, 08:35:21 PM
#2






Screen shots of it on smos





legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
December 24, 2017, 08:29:40 PM
#1
Hey if you want to see the spotswood build on youtube



links are here:

https://www.youtube.com/watch?v=feXukc1d39Y




https://www.youtube.com/watch?v=YjIG9oebnW0


https://www.youtube.com/watch?v=xIxWgv-rsuE



I am missing link from spotswood for the case.
@ spotswood  could you give us a link for it.

case/frame link

https://bitcointalksearch.org/topic/fs-all-aluminum-open-air-frame-for-onda-b250-motherboard-8-gpu-2491321

parts for it:

frame from spotswood

A) rosewill tokamak 1500 watt titanium psu --------------- 1 unit
B) msi seahawk 1080ti--------------------------------------- 3 units
C) evga 1070 ti hybrid---------------------------------------- 4 units
D) asus 1050 ti ----------------------------------------------- 1 unit
E) silverstone 8 pin pcie extenders -------------------------- 4 pieces
F) cable matters 6 pin pcie extenders ----------------------- 2 sets of 2 total of 4.
G) velcro ties -------------------------------------------------- 1 pack of 50
H) fan Splitter ------------------------------------------------- 1 set of 2
I)  blue fans 120mm ------------------------------------------ 2 units
J)  red fans  120mm ------------------------------------------- 2 units
K) grills 120mm ------------------------------------------------ 15 pack
L) red fan 140mm----------------------------------------------- 1

intel g3930 ------------------------------------------------ 1 unit
samsung ddr4 4gb sodimm ------------------------------ 1 unit

A)  https://www.newegg.com/Product/Product.aspx?Item=N82E16817182384

B)  https://www.newegg.com/Product/Product.aspx?Item=N82E16814137126

C)  https://www.newegg.com/Product/Product.aspx?Item=N82E16814487390

D)  https://www.newegg.com/Product/Product.aspx?Item=N82E16814126170

E)   https://www.amazon.com/gp/product/B00B46XKJW/ref=oh_aui_detailpage_o05_s01?

F)   https://www.amazon.com/gp/product/B01DV1Z4EQ/ref=oh_aui_detailpage_o05_s01?

G)  https://www.amazon.com/gp/product/B01N8T4L07/ref=oh_aui_detailpage_o08_s00?

H)  https://www.amazon.com/gp/product/B01GNT8MEM/ref=oh_aui_detailpage_o02_s00?

I)   https://www.amazon.com/gp/product/B00L64O63G/ref=oh_aui_detailpage_o07_s00?

J)   https://www.amazon.com/gp/product/B00KXXRCK0/ref=oh_aui_detailpage_o07_s00?

K)  https://www.amazon.com/gp/product/B00Y20QI0K/ref=oh_aui_detailpage_o08_s00?

L)  https://www.amazon.com/gp/product/B00F6S0XL2/ref=oh_aui_detailpage_o00_s01?




note newegg is out of stock for the g3930
and for the ram  so I listed 3rd party below

https://www.newegg.com/Product/Product.aspx?Item=9SIA85V5879236
https://www.newegg.com/Product/Product.aspx?Item=N82E16819117748
https://www.newegg.com/Product/Product.aspx?Item=9SIACWT5AT9945


if you want riser less boards read below.








My plan Was to have 1070ti GPU's on them with the hybrid water cooling from EVGA.
I upgraded to 3 msi 1080 ti seahawks
and 4 evga 1070 ti hybrids
plus 1 asus 1050 ti



if you do smos  you can use a g4400 --------  I used a celeron g3930   I plan to test  with other cpus as time goes on

http://www.provantage.com/intel-bx80662g4400~7ITEP46W.htm


if you do windows I say go for  more
http://www.provantage.com/intel-bx80677i57400t~7ITEP5R5.htm


ram  

smos/linux a 4gb is good
  
https://www.newegg.com/Product/Product.aspx?Item=N82E16820232145&cm_re=4gb_sodimm_ddr4-_-20-232-145-_-Product



windows 10 an 8 gb is better


https://www.newegg.com/Product/Product.aspx?Item=N82E16820232153&cm_re=8gb_sodimm_ddr4-_-20-232-153-_-Product


I gave my  aliababa link out in this thread.

about 179  shipped to usa using paypal  for 1 sample

about 1430 - 1500 shipped to usa using paypal for a 10 pack


tell sidonia I pointed you to her.  philip  from howell new jersey 07731


Phil,
Your frame for the Onda 250 board is on its way to you.







If you want the frame contact spotswood  he has them .

I will not be ordering anymore boards for sale

I made 8 to 10 dollars profit on each onda b250 sold .

I ordered 21
and sold 15 kept 6.

so about 140-150 profit I had 1 rma for 170 so I lost  around 20 or 30 dollars doing this.

I let buyer keep the dead board as was the only one  that I shipped outside the USA.


My source on alibaba Is :

Sidonia Huang

2017-12-09 07:12


Dear Philip,
 
The 12*PCIE version mining board will be ready around 15th,December Smiley
 
Pls kindly check how many pcs you need?
 
Best regards
 
Sidonia

_____________________________________________
______________________________________________

Here is the pricing she did for me:

1 sample is about 179 to the usa using paypal
a 10 pack is about 1500 to the usa using paypal


https://leiqing.en.alibaba.com/?spm=a2700.8443308.0.0.88Krq1

https://leiqing.en.alibaba.com/product/60707942149-803390961/China_New_Top_Sell_Bitcoins_Mining_Motherboard_With_12_PCIE_Ports_B250_Chipset_Intel_Manufacturer.html?spm=a2700.icbuShop.89.3.36b10622hDun4L



Jump to: