Topic: Starting Phoenix Miner turns TV signal to static (Read 1785 times)

Does your computer have a infrared-interface? I had a notebook once with a infrared-interface, that turned on my tv randomly.

Time to call the Ghostbusters

I'm wondering how you managed not to flip your breaker.  You can only run four, maybe five cards on a single 20 amp breaker.  Try spreading your machines around the house, if you get them on different breakers it may solve your problem.

I think your mining rig is possessed by a demon. Just slowly back out of the house. Find an exorcist, and bring it back to fix your mining rig. If you let it be... It will only get worse...

Yea, it would seem to be a power issue your having there.

That reminds me of how the light fixture in the ceiling of this room will start to flicker when both rigs are running at full power. So maybe it is some type of power issue at hand after all? FYI my Kill-A-Watt has the 2x5970 rig ~850w at full load and the 2x5830 rig which is causing the TV issues at ~500w. Also, I usually run a third mITX box equipped with a 5770 (full load @ ~300w at the very most) in headless mode in this room as well, although I haven't run it since the HD tuner was added this morning.

Sometimes when turning off my kitchen light...it makes the screen on my mining rig monitor go black/blank for 3 seconds or so.  Only happens when I'm playing on PS3 though...I use this same monitor to switch back and forth from the desktop (DVI) to the PS3 (HDMI).  Doesn't happen when the PS3 is off/viewing PC via DVI.

I wonder if the rig is using too much power and the cable box then isn't getting enough.  No clue.

I've never heard of this happening and I failed to find any similar incident over the course of several searches. Anyway, here's what I can tell you. I have two mining rigs in the same room as my LCD-TV. Just earlier today, I upgraded my TV service from basic to digital HD service. I added the HD cable service with the same company which has provided my 10Mbit cable internet for almost a decade now, without any incident I might add. So anyway, this morning I connected the digital HD box to the LCD-TV and everything has been working fine, until only a few minutes back when I fired up the second mining rig. Doing so instantly scrambled the television signal into total static. This only happens when turning on the second mining rig - the other rig has been running all day without incident, while the other rig I started up for the first time today only a few minutes back. The only thing that seems possibly relevant is the fact that the TV, digital box, and the meddlesome mining rig all share a power strip, while the mining rig that has been going all day without incident is on its own power strip (along with monitor, speakers, and an ethernet switch) from a completely different outlet. The problematic rig runs headless, so it's the only other thing plugged into the strip besides the TV and cable tuner. The only other relevant information that I can think to add right now would be that the problematic mining box is running two 5830 cards, while the trouble-free rig runs two 5970s.

This seemed really strange to me. I hope someone familiar with this type of issue can point me in the right direction. I haven't tried any troubleshooting yet in the hopes that I can find the solution on the net. I thank you in advance for taking the time to read this.