Status: 0/unconfirmed, in memory pool

Flep182

legendary

Activity: 938

Merit: 1007

Quote from: HCP on October 12, 2017, 05:46:18 AM

Quote from: Flep182 on October 12, 2017, 03:44:52 AM

I did use the recommended setting in Bitcoin Core wallet. Is there a way to speed it up other than ViaBTC?

Depending on the size of the transaction you might be able to use confirmtx.com for free. Anything UNDER 500 bytes they'll accelerate for free... anything over that is $4.

When you say you used the recommended setting in Bitcoin Core... what was your "Confirmation Time target" set to?

Good point, I moved the bar towards "fast" until it changed for the last time. I checked back, that would've been 2,5 hours. Took 9 hours to even leave the wallet though. Not sure if my doing helped, but I'll save the website for later reference, thanks for that Wink

HCP

legendary

Activity: 2086

Merit: 4361

Quote from: Flep182 on October 12, 2017, 03:44:52 AM

I did use the recommended setting in Bitcoin Core wallet. Is there a way to speed it up other than ViaBTC?

Depending on the size of the transaction you might be able to use confirmtx.com for free. Anything UNDER 500 bytes they'll accelerate for free... anything over that is $4.

When you say you used the recommended setting in Bitcoin Core... what was your "Confirmation Time target" set to?

Flep182

legendary

Activity: 938

Merit: 1007

Finding this older topic, ViaBTC closed their exchange, but the tool for acceleration is still online: https://pool.viabtc.com/tools/txaccelerator/

Now, when entering the txid in the form, it says the transaction fee is too low. I did use the recommended setting in Bitcoin Core wallet. Is there a way to speed it up other than ViaBTC?

jake7676

newbie

Activity: 13

Merit: 0

Worked ! have already 2 confirmations !

thank you bro

jake7676

newbie

Activity: 13

Merit: 0

Thank you for everything bro.

Now for the new transaction made yesterday the status is : Status: 0/unconfirmed, in memory pool ,

So doesn't matter this transaction right ? Only first transactionn ?

Thank you again

HI-TEC99

legendary

Activity: 2772

Merit: 2846

Quote from: jake7676 on March 08, 2017, 01:09:30 PM

Yesterday tha website told me "Acceleration succeeded"

I successfully submitted your transaction again. Hopefully viabtc should include it in their next block. I have never read any complaints that it didn't confirm a transaction before. Maybe the site getting overloaded is creating problems in their system.

This is a screenshot of what the page looked like after I submitted your transaction.

jake7676

newbie

Activity: 13

Merit: 0

Yesterday tha website told me "Acceleration succeeded"

HI-TEC99

legendary

Activity: 2772

Merit: 2846

Quote from: jake7676 on March 08, 2017, 12:08:30 PM

I'm pretty sure because what i've sent here was copy and paste here...... What can i do with this money now ? any change to send to another address or send half of amount and again half?

Thanks

Did you fill out the captcha and press the submit button?

What did the webpage look like afterwards?

Did it look like this?

Or did it look like this?

I keep trying to input the transaction ID below, but it keeps saying submissions are beyond the limit at the moment. If it had already accepted it the page should say so.

Quote from: jake7676 on March 07, 2017, 07:03:12 PM

*snip*

Transaction ID: 77d19ac4415697d7bd2408ff2cec1bd7adee363a0de83b71bd9b4637e55c022e

*snip*

I'll keep trying to submit it until the page accepts it.

jake7676

newbie

Activity: 13

Merit: 0

I'm pretty sure because what i've sent here was copy and paste here...... What can i do with this money now ? any change to send to another address or send half of amount and again half?

Thanks

HI-TEC99

legendary

Activity: 2772

Merit: 2846

Quote from: jake7676 on March 08, 2017, 06:59:56 AM

Hi again ,

I was sending yesterday again the transaction with fees 0.0033 ... here are the details of transaction. How is that possible to don't found the transaction on blockchain and still to be unconfirmed,

Status: 0/unconfirmed, in memory pool, broadcast through 21 node(s)
Date: 3/7/2017 18:48
Debit: -0.13825660 BTC
Transaction fee: -0.00063360 BTC
Net amount: -0.13889020 BTC
Transaction ID: d163514ad6b443f854fa297def3dd3a02a30b4cb2fcf0b8a02c8b8d989254be3
Output index: 0

What i can do ?

Is that transaction an attempt to double spend the coins that got stuck yesterday? It's difficult to do a double spend after the whole network has seen your first transaction.

Are you sure the viabtc transaction accelerator accepted your transaction yesterday? It's still not confirmed, and it should have been because viabtc mined four blocks since you said the accelerator had accepted your transaction yesterday. These are the UTC times viabtc mined blocks.

12:47:03
12:15:18
10:13:00
09:00:36

jake7676

newbie

Activity: 13

Merit: 0

Hi again ,

I was sending yesterday again the transaction with fees 0.0033 ... here are the details of transaction. How is that possible to don't found the transaction on blockchain and still to be unconfirmed,

Status: 0/unconfirmed, in memory pool, broadcast through 21 node(s)
Date: 3/7/2017 18:48
Debit: -0.13825660 BTC
Transaction fee: -0.00063360 BTC
Net amount: -0.13889020 BTC
Transaction ID: d163514ad6b443f854fa297def3dd3a02a30b4cb2fcf0b8a02c8b8d989254be3
Output index: 0

What i can do ?

HI-TEC99

legendary

Activity: 2772

Merit: 2846

Quote from: jake7676 on March 07, 2017, 09:21:42 PM

Anyway ...can you help me with fees ... how much to put the fees at this transaction to have 6 confirmations in max 30 minutes? ?

This site gives a guide to the best fee at any particular time.

https://bitcoinfees.21.co/

It currently says about 200 satoshis/byte, which is 200000 sats per KB, or 0.002 BTC per KB.

However I have an electrum wallet installed that also gives a guide to the best fee. That recommends a higher fee of 0.0033 BTC per KB, which is 330000 sats per KB, or 330 satoshis/byte.

As the network has a massive backlog of unconfirmed transactions I suggest using the higher 0.0033 BTC per KB fee.

jake7676

newbie

Activity: 13

Merit: 0

Anyway ...can you help me with fees ... how much to put the fees at this transaction to have 6 confirmations in max 30 minutes? ?

HI-TEC99

legendary

Activity: 2772

Merit: 2846

Quote from: jake7676 on March 07, 2017, 09:05:56 PM

So they can confirm the first transaction even if made this second transaction ? ( this second transaction was made after i deleted the first transaction from history with "zapwallettxes=1")

Thanks Bro !

Yes they can confirm the first transaction because their node probably didn't see the second one, and would reject it if it did. I read about someone else who tried the accelerator and a double spend. The accelerator ignored the double spend and confirmed his first transaction.

jake7676

newbie

Activity: 13

Merit: 0

So they can confirm the first transaction even if made this second transaction ? ( this second transaction was made after i deleted the first transaction from history with "zapwallettxes=1")

Thanks Bro !

HI-TEC99

legendary

Activity: 2772

Merit: 2846

Quote from: jake7676 on March 07, 2017, 08:59:36 PM

So ... what can i do the best ?

Ir's probably best to wait for viabtc to confirm your transaction. They will probably mine a block in the next few hours and confirm it for you. I know it works because I submitted a few people's stuck transactions to the accelerator, and it confirmed them all.

jake7676

newbie

Activity: 13

Merit: 0

So ... what can i do the best ?

HI-TEC99

legendary

Activity: 2772

Merit: 2846

Quote from: jake7676 on March 07, 2017, 08:46:39 PM

Someone teached me before to write here my problem to add this in bitcoin.conf : zapwallettxes=1

I made it and my money was back in my wallet. Now i made the transaction again to the same address ... when i try to find the transaction on blockchain , doesn't exist ... can you help me ? You have all details again , here :

Status: 0/unconfirmed, in memory pool, broadcast through 4 node(s)
Date: 3/7/2017 17:30
Debit: -0.13847308 BTC
Transaction fee: -0.00041712 BTC
Net amount: -0.13889020 BTC
Transaction ID: cfabe242af680cbbc49f26682304cdb5ee00b8fdbc10f6c7f4587cbbdbd15352
Output index: 0

I couldn't find it on any block explorer either, but that's not unusual. Most nodes only accept the first transaction they see unless your first transaction was marked release by fee. That makes it difficult to do a double spend after most of the nodes have seen your first transaction.

jake7676

newbie

Activity: 13

Merit: 0

Someone teached me before to write here my problem to add this in bitcoin.conf : zapwallettxes=1

I made it and my money was back in my wallet. Now i made the transaction again to the same address ... when i try to find the transaction on blockchain , doesn't exist ... can you help me ? You have all details again , here :

Status: 0/unconfirmed, in memory pool, broadcast through 4 node(s)
Date: 3/7/2017 17:30
Debit: -0.13847308 BTC
Transaction fee: -0.00041712 BTC
Net amount: -0.13889020 BTC
Transaction ID: cfabe242af680cbbc49f26682304cdb5ee00b8fdbc10f6c7f4587cbbdbd15352
Output index: 0

swogerino

legendary

Activity: 3318

Merit: 1247

Bitcoin Casino Est. 2013

Quote from: jake7676 on March 07, 2017, 08:21:08 PM

Acceleration succeeded , do you think that will works ? How long takes until they will confirm ?

Did one earlier today for a massive send that only had a fraction of it dedicated to the miners fee so to complete and one confirmation to go through.
It received that one confirm exactly two hour after the succession was done on viabtc then it went on to confirm the rest.

jake7676

newbie

Activity: 13

Merit: 0

I tried to forget ... i made it and made the transaction again . The transaction don't show yet in blockchain. This is good news or not ?

Status: 0/unconfirmed, in memory pool, broadcast through 4 node(s)
Date: 3/7/2017 17:30
Debit: -0.13847308 BTC
Transaction fee: -0.00041712 BTC
Net amount: -0.13889020 BTC
Transaction ID: cfabe242af680cbbc49f26682304cdb5ee00b8fdbc10f6c7f4587cbbdbd15352
Output index: 0

HI-TEC99

legendary

Activity: 2772

Merit: 2846

Quote from: jake7676 on March 07, 2017, 08:21:08 PM

Acceleration succeeded , do you think that will works ? How long takes until they will confirm ?

I know it works, but you have to wait until the viabtc pool mines a block. That can take anywhere between almost immediately, and half a day. You can find a list of the last blocks viabtc mined, and their times at this link. Their last block was half an hour ago.

https://blockchain.info/blocks/ViaBTC

if you get very lucky another pool might include your transaction in a block before viabtc, and you won't have to wait as long. However, if another pool doesn't include it then viabtc will.

jake7676

newbie

Activity: 13

Merit: 0

Acceleration succeeded , do you think that will works ? How long takes until they will confirm ?

HI-TEC99

legendary

Activity: 2772

Merit: 2846

Instead of trying a double spend you could try pasting your transaction's ID into the site linked below. It's run by a mining pool that confirms transactions pasted into it. Unfortunately it gets overloaded, so you will have to keep trying a few times an hour until it accepts your transaction.

https://www.viabtc.com/tools/txaccelerator/

jake7676

newbie

Activity: 13

Merit: 0

For double spend need to add money in my account again right ? I have 0 balance now

This was the recommanded fees .... omg

Jannn

hero member

Activity: 1120

Merit: 502

Your transaction fee is very small so your transaction will need more time to got a confirmation.
One solution if it is double spend it and just include a higher fee on the transaction.

jake7676

newbie

Activity: 13

Merit: 0

Please someone if can help me , i read every topic from here with unconfirmed transactions and can't understand.
For start i use Bitcoin Core version v0.13.2 (64-bit) Windows version

Here you will see more details :

Status: 0/unconfirmed, in memory pool
Date: 3/6/2017 08:39
Debit: -0.13885180 BTC
Transaction fee: -0.00003840 BTC
Net amount: -0.13889020 BTC
Transaction ID: 77d19ac4415697d7bd2408ff2cec1bd7adee363a0de83b71bd9b4637e55c022e
Output index: 0

Please can someone explain what can i do ?

Thank you !

Topic: Status: 0/unconfirmed, in memory pool (Read 3536 times)