I have problems with my rig :/
Rig is running with 1300W PSU, 8 GB RAM, ASROCK H77 Pro4/M and Intel Pentium G2130.
Right now there are 3x 7950 an 1x 7700 series card (old card ~120Khs).
At full load rig is pulling less than 900W from wall (cards are on stock voltage).
But every time GPU2 GOES SICK/DEAD. Wtf?
I was googling and reading a lot of posts with SICK GPUs, tried a lot of things but no luck at all.
I was thinking about RMA today and unplugged GPU2. Brand new gpu (before unplug it was GPU3) is now GPU2 and it goes SICK too!
I tried overclocking, underclocking, stock clock, connecting monitor but still no luck all the time one SICK card.
(Only one thing I was not tested are dummy plugs at this time...)
Rig is running BAMT (tried 1.3 and 1.5.2).
Config doesnt matter I was trying all ussualy used settings what I have found on internet but still SICK card.
Here is my rig after boot (everythink looks good) BUT gpu 3 VOLTAGE is STRANGE stock voltage is 1.25V so how this can be 1.169V:
