stuck at making bitcoin core 0.10.0 on raspberry 1 B+

audricd

newbie

Activity: 28

Merit: 0

lsblk returns

Code:

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 1.4T 0 disk
├─sda1 8:1 0 1.3T 0 part
└─sda2 8:2 0 30.7G 0 part [SWAP]
loop0 7:0 0 963.1M 0 loop
mmcblk0 179:0 0 14.6G 0 disk
└─mmcblk0p1 179:1 0 14.6G 0 part

swap exists but its not being used thats the problem and I dont know why. Im running again

Code:

./autogen.sh && ./configure CPPFLAGS=”-I/usr/local/BerkeleyDB.4.8/include -O2″ LDFLAGS=”-L/usr/local/BerkeleyDB.4.8/lib” && make

but I dont have really hope.

Reynaldo

legendary

Activity: 1143

Merit: 1000

i think if you set it on fstab it should start it at start.
write this

Code:

lsblk

and then youll get smoething like this

Code:

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 596.2G 0 disk
├─sda1 8:1 0 8G 0 part [SWAP]

that means your swap is on
the thing is that it will only use it when it is running out of physical ram, so what i would do is to verify if the swap is on then
try to recompile again..

Are you using raspbian? If you dont mind to get your hands dirty, get archlinux arm and compile it with the link that i gave above, i can help you install packer to install programs from the AUR and there's a nice guide on how to install arch linux arm:

http://elinux.org/ArchLinux_Install_Guide

audricd

newbie

Activity: 28

Merit: 0

Quote from: Reynaldo on March 14, 2015, 08:14:23 AM

Do you have a swap file? I succesfully compiled it with my raspberry pi + using the bitcoin-core in the AUR (Arch User Repository) https://aur.archlinux.org/packages/bitcoin-core/

My swap file is about 2GB on the raspberry pi, for more instructions on how to set more swap https://wiki.archlinux.org/index.php/swap

I did not! thanks!

But Im a little puzzled, I have successfully followed the steps from that nice guide, and when I do swapon -s, it lists my new created swap... But it also says 0 used and priority -1

I have so on my /etc/fstab it has priority:
/dev/sda2 none swap defaults,pri=100 0 0

and ran:
swapon -p 100 /dev/sda2

but apparently even with top priority that swap is not being used! So Im still stuck at making bitcoin coire

Reynaldo

legendary

Activity: 1143

Merit: 1000

Do you have a swap file? I succesfully compiled it with my raspberry pi + using the bitcoin-core in the AUR (Arch User Repository) https://aur.archlinux.org/packages/bitcoin-core/

My swap file is about 2GB on the raspberry pi, for more instructions on how to set more swap https://wiki.archlinux.org/index.php/swap

audricd

newbie

Activity: 28

Merit: 0

Quote from: Newar on March 13, 2015, 11:02:47 PM

Yeah, don't be deterred by those numbers. I ran 0.8.6 on a B no problems. Of course it can be argued that it's not beneficial to network, since tx are not validated quick enough. But it ran..

Re Memory split: I went with no graphic memory at all as it was headless anyway.

how about btcd? what can you tell about it? how do you install it?

Newar

legendary

Activity: 1358

Merit: 1001

https://gliph.me/hUF

Yeah, don't be deterred by those numbers. I ran 0.8.6 on a B no problems. Of course it can be argued that it's not beneficial to network, since tx are not validated quick enough. But it ran..

Re Memory split: I went with no graphic memory at all as it was headless anyway.

audricd

newbie

Activity: 28

Merit: 0

those numbers dont add up. if they were it, none of the tutorials for bitcoin on raspberry would be real, theres not a raspberry model with 2 gigs of memory, not even the latest one.

Trolololo

sr. member

Activity: 263

Merit: 280

While synchronizing, BitcoinCore needs a bit more than 1 GB of RAM in my old Win7x64 PC.
When synchronized, only about half that RAM.

So at least 2 GB of RAM is needed in a Win7 PC.
I suppose that you need also 2 GB in a RaspberryPi.

Hope that helps.

audricd

newbie

Activity: 28

Merit: 0

thats what I went for at first too, but because I use BerryBoot I cant not split memory. Did it by myself on config.tx with

Code:

gpu_mem_256=112
gpu_mem_512=368
cma_lwm=16
cma_hwm=32
cma_offline_start=16

giving it a shot with out. let see what happens.

Newar

legendary

Activity: 1358

Merit: 1001

https://gliph.me/hUF

The below worked for me. Although swap is handled differently these days of course.

http://dave.cheney.net/2012/09/25/installing-go-on-the-raspberry-pi

audricd

newbie

Activity: 28

Merit: 0

Quote from: Newar on March 11, 2015, 11:19:12 PM

I recently got btcd compiled on a B though.

Im getting stuck at compiling Go

Code:

# ../doc/codewalk

real 0m39.786s
user 0m25.080s
sys 0m2.740s

# ../test/bench/go1
ok _/home/pi/go/test/bench/go1 38.662s

# ../test

I havent waited 12 hours but... Its been stuck at that point for awhile.

audricd

newbie

Activity: 28

Merit: 0

aaah so thats why.. Thanks a lot!

Newar

legendary

Activity: 1358

Merit: 1001

https://gliph.me/hUF

Yes, it runs out of memory. Last one I successfully built was 0.8.6, IIRC.

I recently got btcd compiled on a B though.

audricd

newbie

Activity: 28

Merit: 0

Hello,

So I have been following this guide:
http://bit-post.com/featured/running-bitcoincore-0-10-on-a-raspberry-pi-2-4419

And I am aware it says for raspberry 2. But theres other few guides for raspberry 1 and its pretty much exactly the same, word by word.

Did all the steps (download, install berkely, autogen, configure with the proper flags) but make successfully.

I am well aware the raspberry is slow. dead slow. it took me a few hours to do those steps. but I have left the raspberry 12 hours on the make process, and its stuck at CXX libbitcoin_server_a-init.o It wont go past that file. Patience isnt my strongest suit, but I think half a day even for the raspberry should be enough, right?

I even been running it inside one of those 12v car fridge. And it uses copper heat sinks. So I dont think overheating is the issue.

Even after 12 hours of making the raspberry is not "frozen" / "stuck" because when I move the mouse, to unlock screensaver (after a few minutes...) it brings back the screen. And goes dark after awhile again. So screensave works, that means the system is working.

But no way it will go past CXX libbitcoin_server_a-init.o

Any ideas?

Thanks.

Topic: stuck at making bitcoin core 0.10.0 on raspberry 1 B+ (Read 1432 times)