@crazydane thx man!
For your last solution, do you mean i have to plug this one
https://www.homedepot.com/p/GE-4-ft-4-Prong-30-Amp-Dryer-Cord-WX09X10018DS/203497495?MERCH=REC-_-rv_gm_pip_rr-_-303873807-_-203497495-_-N
To my L14-30R receptacle and then wire it to the this pdu
https://www.ebay.com/itm/HP-252635-001-PDU-24A-MPDU-HIGH-VOLTAGE-OUT-PERP-32X-C13-IN-L6-30P/112846040592?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
and finally what kind of power cord do i need to plug the supernova1600 to that pdu?
Topic: Supernova 1600 + Dryer input Nema 10-30 (Read 169 times)
I use these:
https://www.amazon.com/gp/product/B00002NAT9/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
And plug these into them:
https://www.ebay.com/itm/HP-252635-001-PDU-24A-MPDU-HIGH-VOLTAGE-OUT-PERP-32X-C13-IN-L6-30P/112846040592?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
And if I need C13 outlets, I plug these into the above:
https://www.ebay.com/itm/LOT-OF-2-252638-001-HP-100-240V-12A-8-Outlet-Modular-PDU-Extension-Bar/282281082272?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
So if it was me, I would just add a 30A breaker to your panel and run #10 to a L6-30 receptacle. If that is not an option, I would open up that L14-30 and (properly) tab the 2 hots and ground to a L6-30. You don't need neutral for loads that are purely 240V (such as an ATX PSU). But depending on load, you might not be able to run the dryer at the same time as the GPU rig. Remember you can only load that 30A breaker to 80% which would be 5,760 Watts.
Another option would be to get a L14-30 plug and replace the L6-30 on the end of that HP 24A PDU with it. That way you would not touch your house wiring at all.
https://www.amazon.com/gp/product/B00002NAT9/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
And plug these into them:
https://www.ebay.com/itm/HP-252635-001-PDU-24A-MPDU-HIGH-VOLTAGE-OUT-PERP-32X-C13-IN-L6-30P/112846040592?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
And if I need C13 outlets, I plug these into the above:
https://www.ebay.com/itm/LOT-OF-2-252638-001-HP-100-240V-12A-8-Outlet-Modular-PDU-Extension-Bar/282281082272?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
So if it was me, I would just add a 30A breaker to your panel and run #10 to a L6-30 receptacle. If that is not an option, I would open up that L14-30 and (properly) tab the 2 hots and ground to a L6-30. You don't need neutral for loads that are purely 240V (such as an ATX PSU). But depending on load, you might not be able to run the dryer at the same time as the GPU rig. Remember you can only load that 30A breaker to 80% which would be 5,760 Watts.
Another option would be to get a L14-30 plug and replace the L6-30 on the end of that HP 24A PDU with it. That way you would not touch your house wiring at all.
If some one has better idea Please suggest me.
@ccgllc Thank you for your reply.
Im from Canada and comfortable building my own electrical stuff.
Do you mean this one?
https://www.homedepot.com/p/GE-4-ft-4-Prong-30-Amp-Dryer-Cord-WX09X10018DS/203497495?MERCH=REC-_-rv_gm_pip_rr-_-303873807-_-203497495-_-N
How about these two together?
https://www.homedepot.com/p/Conntek-1-5-ft-10-4-Adapter-Cord-30-Amp-NEMA-14-30P-4-Prong-Dryer-Plug-to-30-Amp-L14-30R-4-Prong-Locking-Female-Connector-14330/301794882
https://www.amazon.com/Conntek-1-5-Feet-Connector-Generator-Extension/dp/B005HSK29E
Is there any PDU to connect directly to 4-Prong-30-Amp-Dryer ?
Im from Canada and comfortable building my own electrical stuff.
Do you mean this one?
https://www.homedepot.com/p/GE-4-ft-4-Prong-30-Amp-Dryer-Cord-WX09X10018DS/203497495?MERCH=REC-_-rv_gm_pip_rr-_-303873807-_-203497495-_-N
How about these two together?
https://www.homedepot.com/p/Conntek-1-5-ft-10-4-Adapter-Cord-30-Amp-NEMA-14-30P-4-Prong-Dryer-Plug-to-30-Amp-L14-30R-4-Prong-Locking-Female-Connector-14330/301794882
https://www.amazon.com/Conntek-1-5-Feet-Connector-Generator-Extension/dp/B005HSK29E
Is there any PDU to connect directly to 4-Prong-30-Amp-Dryer ?
Depends how handy you are and how comfortable you are building your own electrical stuff.
30 amp power using 10 gauge (Orange in the USA, not sure internationally) wire. I would go to home depot, buy the male counterpart, some wire, electrical boxes, and sockets and wire myself up a custom made extension cord.
Note that unless you have a 220V power cord for the supernova, you will likely have to cheat and use a 110V sockets wired at 220V, so your power supply cord will fit. That is NOT code.
30 amp power using 10 gauge (Orange in the USA, not sure internationally) wire. I would go to home depot, buy the male counterpart, some wire, electrical boxes, and sockets and wire myself up a custom made extension cord.
Note that unless you have a 220V power cord for the supernova, you will likely have to cheat and use a 110V sockets wired at 220V, so your power supply cord will fit. That is NOT code.
Hi guys,
What are cheapest solution (and safe) to use 30 Amp L14-30R 4-Prong receptacle (240v for dryer) with supernova 1600 + 5 GTX1080Ti rig?
https://www.homedepot.com/p/Leviton-30-Amp-Industrial-Flush-Mount-Shallow-Single-Outlet-Black-R10-00278-S00/300324233
What are cheapest solution (and safe) to use 30 Amp L14-30R 4-Prong receptacle (240v for dryer) with supernova 1600 + 5 GTX1080Ti rig?
https://www.homedepot.com/p/Leviton-30-Amp-Industrial-Flush-Mount-Shallow-Single-Outlet-Black-R10-00278-S00/300324233
Jump to: