Topic: System Hangs - Black Screen No Signal (Read 433 times)
Okay so with the system running off of the extension chord to the other room it has hung up again.
also, look at the capacitors on the mainboard for any signs of failure.
Well i did do that a couple weeks ago when the issue first started and all the caps look good. The motherboard is refurbished and i already started the return process because it's only been a couple weeks. But I think it may be an electrical problem in my house as it is an old house. I wish I knew more about electricity. From what I've read it could be noise in the lines causing unstable voltages. But again, why is it just the one system that is affected?
*
the surge protector may have been to close to its limits.
the 850 watt system was always pulling close to 700 watts...
so you were close to the surge protectors limits using 2 pc's
the 850 watt system was always pulling close to 700 watts...
so you were close to the surge protectors limits using 2 pc's
Actually, I switched the 500W system to the wall (same receptacle) to test that theory and it is still happening when I switch the box fan speed (plugged in to the adjacent wall receptacle) the system hangs and the display goes out.
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
also, look at the capacitors on the mainboard for any signs of failure.
the surge protector may have been to close to its limits.
the 850 watt system was always pulling close to 700 watts...
so you were close to the surge protectors limits using 2 pc's
the 850 watt system was always pulling close to 700 watts...
so you were close to the surge protectors limits using 2 pc's
Sorry,
System is running normally and will boot fine, but randomly the display will go out when just browsing the web or sitting idle, black screen as in no signal to monitor. But the other system uses the same monitor and everything is fine with it. Power button has to be held to turn it off after display goes black. The 1 GPU in it stops mining when this happens. No heat issues.
The 2 systems are plugged in to the same surge protector when this is happening. Why is the one system doing this but not the other? *Note that I have used an extension chord to plug the system that hangs in to another room, and it is no longer hanging up. But I'd still like to know for sure what is happening.
System 1:
EVGA 850 B2
Celeron G1840
8GB DDR3 1600
GA-Z97X-Gaming 7
120GB SSD
2x RX 470 4GB
2x RX 480 4GB
System 2:
EVGA 500B
Pentium G4560
8GB DDR4 2400
MSI Z270M MORTAR
240GB SSD
1x RX 470 4GB
System is running normally and will boot fine, but randomly the display will go out when just browsing the web or sitting idle, black screen as in no signal to monitor. But the other system uses the same monitor and everything is fine with it. Power button has to be held to turn it off after display goes black. The 1 GPU in it stops mining when this happens. No heat issues.
The 2 systems are plugged in to the same surge protector when this is happening. Why is the one system doing this but not the other? *Note that I have used an extension chord to plug the system that hangs in to another room, and it is no longer hanging up. But I'd still like to know for sure what is happening.
System 1:
EVGA 850 B2
Celeron G1840
8GB DDR3 1600
GA-Z97X-Gaming 7
120GB SSD
2x RX 470 4GB
2x RX 480 4GB
System 2:
EVGA 500B
Pentium G4560
8GB DDR4 2400
MSI Z270M MORTAR
240GB SSD
1x RX 470 4GB
Black screen after BIOS splash? Any POST beeps? Windows installed on the system already? Does the power button shut the system down instantly, or do you need to hold it? Your description tells us nothing, troubleshoot a bit, try different things, give greater details.
I have 2 system plugged in to the same receptacle.
System 1 = 4 GPUs
Sysetm 2 = 1 GPU
System 2 keeps hanging by going to a black screen and sending no signal to the monitor. It is my daily use PC. I have a box fan plugged in to the adjacent wall's receptacle. I just now noticed that I can change the speed on the box fan and it will immediately trigger System 2 to hang like it has been doing about once a day randomly for the past 2 weeks (since I installed the new (refurbished) motherboard) which I suspected to be the issue and I've already ordered a replacement.
Both system 1 & 2 are grounded to the same ground. What could be the issue here?
*Edit: Just moved the power source (via extension chord
) of the system that hangs to another room in the house and the issue is no longer present, at least when i switch the fan speed.
System 1 = 4 GPUs
Sysetm 2 = 1 GPU
System 2 keeps hanging by going to a black screen and sending no signal to the monitor. It is my daily use PC. I have a box fan plugged in to the adjacent wall's receptacle. I just now noticed that I can change the speed on the box fan and it will immediately trigger System 2 to hang like it has been doing about once a day randomly for the past 2 weeks (since I installed the new (refurbished) motherboard) which I suspected to be the issue and I've already ordered a replacement.
Both system 1 & 2 are grounded to the same ground. What could be the issue here?
*Edit: Just moved the power source (via extension chord
) of the system that hangs to another room in the house and the issue is no longer present, at least when i switch the fan speed. Jump to: