Bitcoin Forum>Bitcoin>Mining>Mining support
Author

Topic: T17 bad clock counter error (Read 96 times)

BitMaxz
legendary
Activity: 3248
Merit: 2971
BTC price road to $80k
T17 bad clock counter error
December 15, 2022, 07:26:35 AM
#6
Quote from: mega_miner on December 15, 2022, 01:50:57 AM
Because it doesn't work fine in other boards.

So it means the other boards are working fine but the other hash board is not.
Like I said above you have 3 different hash board voltages I believe you have 1 or 2 hash boards not running properly if the other hash board is working fine on that unit then you can dump the firmware of that hash board and flash it to other hash board that does not work properly. So that the control board will recognize it.

Because if the working hash board is not matched to other hash boards that do not work then it will run with some issues. So make sure they are match since you know already how to reprogram PIC then reprogram the other 1 or 2 hash boards that do not work properly. If they match and have another issue then post the new logs here and focus on that issue.

Here's some guidance on how to repair the hash board below just in case you need a guide.

- https://www.zeusbtc.com/manuals/Antminer-T17e-Hash-Board-Repair-Guide.asp
mega_miner
newbie
Activity: 7
Merit: 0
Re: T17 bad clock counter error
December 15, 2022, 01:50:57 AM
#5
Quote from: BitMaxz on December 14, 2022, 05:40:25 PM
If it works fine why do you need to fix the bad clock counter?
If it's running fine then ignore the error and keep mining.
Because it doesn't work fine in other boards.

Quote from: BitMaxz on December 14, 2022, 05:40:25 PM
Would you mind trying to flash the unit with BraiinsOS some issues can be fixed by switching to modded firmware like BraiinsOS?
Unfortunately since its for someone else, I can only use stock firmware. But modded firmware are way better than stock in almost every aspect.

Thanks for the tips.
BitMaxz
legendary
Activity: 3248
Merit: 2971
BTC price road to $80k
Re: T17 bad clock counter error
December 14, 2022, 05:40:25 PM
#4
If it works fine why do you need to fix the bad clock counter?
If it's running fine then ignore the error and keep mining.

Usually, if the voltages of the hash board for the s17/t17 series are different miner is not running normally mostly it stops the miner in a few minutes. Unless you are not using stock firmware?

Would you mind trying to flash the unit with BraiinsOS some issues can be fixed by switching to modded firmware like BraiinsOS?
mega_miner
newbie
Activity: 7
Merit: 0
Re: T17 bad clock counter error
December 14, 2022, 01:50:52 AM
#3
Quote from: BitMaxz on December 13, 2022, 07:58:50 PM
Reballing is likely the same as resoldering what you did you just directly go to hardware without troubleshooting testing test points and understanding what the kernel logs say.

On testing points everything is ok. that's why my only option was hardware stuff.
the main error that I cant solve it bad clock counter, and that happens when I test even one hashboard, so even having different voltages wont be the case (since its just one board), but thanks for the tip.
I'll try to find a board that doesn't work so as to post the logs, since the one I posted before doesn't reboot non-stop.
Do you have any idea what the cause can be? Or logs are needed to say anything?
BitMaxz
legendary
Activity: 3248
Merit: 2971
BTC price road to $80k
Re: T17 bad clock counter error
December 13, 2022, 07:58:50 PM
#2
Reballing is likely the same as resoldering what you did you just directly go to hardware without troubleshooting testing test points and understanding what the kernel logs say.

Now look at this log

Code:
2022-11-30 10:42:03 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.891543
2022-11-30 10:42:05 power_api.c:86:get_average_voltage: chain[1], voltage is: 18.093603
2022-11-30 10:42:08 power_api.c:86:get_average_voltage: chain[2], voltage is: 18.271172

3 hashboard has different voltages if this is not the same it won't work or run normally flashing the hashboard PIC without a backup and use a random PIC file will always end up like this.
You will need the EEPROM tool or  hashboard code editor to match them

Here's what it looks like
- https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=236
mega_miner
newbie
Activity: 7
Merit: 0
Re: T17 bad clock counter error
December 13, 2022, 06:13:23 AM
#1
I have a couple of T17 miners (for repair), some of them show this error:
"register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 1, clock counter 0x00000006"
 in some hashboards this does nothing and after a reboot (never figured out why) it hashes and doesn't have any other problem.
In other hashboards the go in an infinite rebooting loop.
I tried cleaning them, changing firmware, control board, psu and other things, but non helped.
I also tried these things:
Asic re-ball (the one mentioned in kernel log, and others around it)
Changing asic
Re-ball related resistors and capacitors
Even in one Hashboard all of the asics where re-balled, but nothing happened
Pic reprogramming
Pic re-balling
Pic changing
Temp sensor and related components re-balled or changed
Here is a log from a miner that hashes, currently don't have any faulty boards at hand

Code:
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_ec_hdr+0x68/0x1cc)
[] (ubi_io_read_ec_hdr) from [] (ubi_attach+0x130/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (ubi_attach+0x1ec/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 362:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 362:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 362:0, read only 64 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 362:0, read 64 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_ec_hdr+0x68/0x1cc)
[] (ubi_io_read_ec_hdr) from [] (ubi_attach+0x130/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (ubi_attach+0x1ec/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 750:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 750:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 750:0, read only 64 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 750:0, read 64 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_ec_hdr+0x68/0x1cc)
[] (ubi_io_read_ec_hdr) from [] (ubi_attach+0x130/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (ubi_attach+0x1ec/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 2817/948, WL threshold: 4096, image sequence number: 1198263195
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry
UBIFS (ubi1:0): recovery needed
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 750:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (wear_leveling_worker+0x1e0/0x6a0)
[] (wear_leveling_worker) from [] (do_work+0xcc/0x100)
[] (do_work) from [] (ubi_thread+0x100/0x190)
[] (ubi_thread) from [] (kthread+0xdc/0xf0)
[] (kthread) from [] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 750 (LEB 0:715), data moved to PEB 466
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 362:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (wear_leveling_worker+0x1e0/0x6a0)
[] (wear_leveling_worker) from [] (do_work+0xcc/0x100)
[] (do_work) from [] (ubi_thread+0x100/0x190)
[] (ubi_thread) from [] (kthread+0xdc/0xf0)
[] (kthread) from [] (ret_from_fork+0x14/0x3c)
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8D25A753-B1E6-461F-BA97-EE4B6F2054F5, small LPT model
ubi1: scrubbed PEB 362 (LEB 0:444), data moved to PEB 895
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 232:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (wear_leveling_worker+0x1e0/0x6a0)
[] (wear_leveling_worker) from [] (do_work+0xcc/0x100)
[] (do_work) from [] (ubi_thread+0x100/0x190)
[] (ubi_thread) from [] (kthread+0xdc/0xf0)
[] (kthread) from [] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 232 (LEB 0:458), data moved to PEB 708
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
Nov 30 10:42:16 (none) local0.notice bmminer: set_start_time_point total_tv_start_sys=876 total_tv_end_sys=877
Nov 30 10:42:19 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_api_detect return: 0
Nov 30 10:42:19 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_update_job return: 0
Nov 30 10:42:20 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_shutdown return: 0
Nov 30 10:42:20 (none) local0.err cgminer: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17
Nov 30 10:42:20 (none) local0.notice cgminer[2820]: about to send detect
Nov 30 10:42:20 (none) local0.notice cgminer[2820]: set_start_time_point total_tv_start_sys=880 total_tv_end_sys=881
Nov 30 10:42:20 (none) local0.notice cgminer[2820]: Probing for an alive pool
Nov 30 10:42:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:42:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:42:22 (none) local0.notice cgminer[2820]: LOW POWER MODE!
Nov 30 10:42:22 (none) local0.notice cgminer[2820]: in stratum_sthread 
Nov 30 10:42:22 (none) local0.notice cgminer[2820]: Pool 0 difficulty changed to 65536
Nov 30 10:42:22 (none) local0.notice cgminer[2820]: Network diff set to 37T
Nov 30 10:42:22 (none) local0.notice cgminer[2820]: POOL 0 support ab mode!
Nov 30 10:42:22 (none) local0.notice cgminer[2820]: update job
Nov 30 10:42:22 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:42:22 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:42:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:42:22 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:42:23 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Nov 30 10:42:25 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:42:25 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:42:25 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:42:25 (none) local0.notice cgminer[2820]: Accepted b8ceaea7 Diff 90.8K/65536 BTM_SOC 0 pool 0 
Nov 30 10:42:27 (none) local0.warn cgminer[2820]: API running in IP access mode on port 4028 (15)
Nov 30 10:42:28 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Nov 30 10:42:36 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Nov 30 10:42:36 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Nov 30 10:42:36 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Nov 30 10:42:43 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:42:43 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:42:43 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:42:43 (none) local0.notice cgminer[2820]: Accepted 843a58ab Diff 127K/65536 BTM_SOC 0 pool 0 
Nov 30 10:42:43 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:42:43 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:42:43 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:42:43 (none) local0.notice cgminer[2820]: Accepted d9cad673 Diff 77K/65536 BTM_SOC 0 pool 0 
Nov 30 10:42:44 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:42:44 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:42:44 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:42:44 (none) local0.notice cgminer[2820]: Accepted f18796a0 Diff 69.5K/65536 BTM_SOC 0 pool 0 
Nov 30 10:42:46 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:42:46 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:42:46 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:42:46 (none) local0.notice cgminer[2820]: Accepted 69045da3 Diff 160K/65536 BTM_SOC 0 pool 0 
Nov 30 10:42:50 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Nov 30 10:42:50 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:42:50 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:42:50 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:42:50 (none) local0.notice cgminer[2820]: Accepted d5033267 Diff 78.8K/65536 BTM_SOC 0 pool 0 
Nov 30 10:42:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:42:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:42:50 (none) local0.notice cgminer[2820]: update job
Nov 30 10:42:50 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:42:50 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:42:50 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:42:50 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:42:52 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:42:52 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:42:52 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:42:52 (none) local0.notice cgminer[2820]: Pool 0 difficulty changed to 262144
Nov 30 10:42:52 (none) local0.notice cgminer[2820]: Accepted 75469445 Diff 143K/65536 BTM_SOC 0 pool 0 
Nov 30 10:42:52 (none) local0.notice cgminer[2820]: update job
Nov 30 10:42:52 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:42:52 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:42:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:42:52 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:43:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:43:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:43:20 (none) local0.notice cgminer[2820]: update job
Nov 30 10:43:20 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:43:20 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:43:20 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:43:20 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:43:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:43:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:44:00 (none) local0.notice cgminer[2820]: update job
Nov 30 10:44:00 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:44:00 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:44:00 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:44:00 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:44:10 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:44:10 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:44:10 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:44:11 (none) local0.notice cgminer[2820]: Accepted 1f34b743 Diff 538K/262144 BTM_SOC 0 pool 0 
Nov 30 10:44:17 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:44:17 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:44:17 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:44:17 (none) local0.notice cgminer[2820]: Accepted 1562ae6b Diff 785K/262144 BTM_SOC 0 pool 0 
Nov 30 10:44:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:44:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:44:20 (none) local0.notice cgminer[2820]: update job
Nov 30 10:44:20 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:44:20 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:44:20 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:44:20 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:44:20 (none) local0.info bmminer: (null) 0: invalid nonce - HW error
Nov 30 10:44:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:44:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:44:58 (none) local0.notice cgminer[2820]: update job
Nov 30 10:44:58 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:44:58 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:44:58 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:44:58 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:45:11 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:45:11 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:45:11 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:45:11 (none) local0.notice cgminer[2820]: Accepted 2171d8a5 Diff 502K/262144 BTM_SOC 0 pool 0 
Nov 30 10:45:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:45:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:45:20 (none) local0.notice cgminer[2820]: update job
Nov 30 10:45:20 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:45:20 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:45:20 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:45:20 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:45:37 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:45:37 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:45:37 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:45:38 (none) local0.notice cgminer[2820]: Accepted 0153690f Diff 12.7M/262144 BTM_SOC 0 pool 0 
Nov 30 10:45:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:45:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:46:02 (none) local0.notice cgminer[2820]: update job
Nov 30 10:46:02 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:46:02 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:46:02 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:46:02 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:46:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:46:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:46:34 (none) local0.notice cgminer[2820]: update job
Nov 30 10:46:34 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:46:34 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:46:34 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:46:34 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:46:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:46:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:46:57 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:46:57 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:46:57 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:46:57 (none) local0.notice cgminer[2820]: Accepted 04d1766b Diff 3.48M/262144 BTM_SOC 0 pool 0 
Nov 30 10:47:06 (none) local0.notice cgminer[2820]: update job
Nov 30 10:47:06 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:47:06 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:47:06 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:47:06 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:47:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:47:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:47:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:47:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:47:54 (none) local0.notice cgminer[2820]: update job
Nov 30 10:47:54 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:47:54 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:47:54 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:47:54 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:47:55 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:47:55 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:47:55 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:47:55 (none) local0.notice cgminer[2820]: Accepted 197623b0 Diff 659K/262144 BTM_SOC 0 pool 0 
Nov 30 10:48:09 (none) local0.notice cgminer[2820]: update job
Nov 30 10:48:09 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:48:09 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:48:09 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:48:09 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:48:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:48:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:48:39 (none) local0.notice cgminer[2820]: update job
Nov 30 10:48:39 (none) local0.notice cgminer[2820]: job buf total len:2601, offset:2601
Nov 30 10:48:39 (none) local0.notice cgminer[2820]: about to send job, size is 2601
Nov 30 10:48:39 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2601
Nov 30 10:48:39 (none) local0.notice bmminer: parse job buf len:2601
Nov 30 10:48:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:48:50 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
Nov 30 10:48:54 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:48:54 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:48:54 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:48:54 (none) local0.notice cgminer[2820]: Accepted 16637384 Diff 749K/262144 BTM_SOC 0 pool 0 
Nov 30 10:49:07 (none) local0.notice bmminer: need data size:478, actual size:478
Nov 30 10:49:07 (none) local0.notice cgminer[2820]: got nonce sz 478
Nov 30 10:49:07 (none) local0.notice cgminer[2820]: cb_bitmain_submit_nonce nonce submited
Nov 30 10:49:08 (none) local0.notice cgminer[2820]: Accepted 0b3451bf Diff 1.5M/262144 BTM_SOC 0 pool 0 
Nov 30 10:49:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov 30 10:49:20 (none) local0.warn cgminer[2820]: No Stratum, GBT or Solo support in pool 1  unable to use
2022-11-30 10:35:37 driver-btm-api.c:663:init_freq_mode: This is scan-user version
2022-11-30 10:35:37 driver-btm-api.c:2028:bitmain_soc_init: opt_multi_version     = 1
2022-11-30 10:35:37 driver-btm-api.c:2029:bitmain_soc_init: opt_bitmain_ab        = 1
2022-11-30 10:35:37 driver-btm-api.c:2030:bitmain_soc_init: opt_bitmain_work_mode = 0
2022-11-30 10:35:37 driver-btm-api.c:2031:bitmain_soc_init: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17
2022-11-30 10:35:37 driver-btm-api.c:2032:bitmain_soc_init: commit version: 1c5be6f 2020-04-20 16:18:14, build by: lol 2020-04-23 16:35:04
2022-11-30 10:35:37 driver-btm-api.c:1844:show_sn: no SN got, please write SN to /nvdata/sn
2022-11-30 10:35:37 driver-btm-api.c:1167:miner_device_init: Detect 256MB control board of XILINX
2022-11-30 10:35:37 driver-btm-api.c:1115:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2022-11-30 10:35:37 thread.c:885:create_read_nonce_reg_thread: create thread
2022-11-30 10:35:43 driver-btm-api.c:1099:init_miner_version: miner ID : 8064642429e04814
2022-11-30 10:35:43 driver-btm-api.c:1105:init_miner_version: FPGA Version = 0xB013
2022-11-30 10:35:45 eeprom.c:425:check_pattern_test_level: invalid pattern test result. ignore
2022-11-30 10:35:47 eeprom.c:425:check_pattern_test_level: invalid pattern test result. ignore
2022-11-30 10:35:49 eeprom.c:425:check_pattern_test_level: invalid pattern test result. ignore
2022-11-30 10:35:49 driver-btm-api.c:737:get_product_id: product_id[0] = 1
2022-11-30 10:35:49 driver-btm-api.c:737:get_product_id: product_id[1] = 1
2022-11-30 10:35:49 driver-btm-api.c:737:get_product_id: product_id[2] = 1
2022-11-30 10:35:49 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[0] = 1
2022-11-30 10:35:49 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[1] = 1
2022-11-30 10:35:49 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[2] = 1
2022-11-30 10:35:49 driver-btm-api.c:1919:bitmain_board_init: g_ccdly_opt = 1
2022-11-30 10:35:49 driver-btm-api.c:676:_set_project_type: project:2
2022-11-30 10:35:49 driver-btm-api.c:706:_set_project_type: Project type: Antminer T17
2022-11-30 10:35:49 driver-btm-api.c:717:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2022-11-30 10:35:49 driver-btm-api.c:718:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2022-11-30 10:35:49 driver-btm-api.c:717:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2022-11-30 10:35:49 driver-btm-api.c:718:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2022-11-30 10:35:49 driver-btm-api.c:717:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2022-11-30 10:35:49 driver-btm-api.c:718:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2022-11-30 10:35:50 driver-btm-api.c:1939:bitmain_board_init: Fan check passed.
2022-11-30 10:35:52 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2022-11-30 10:35:55 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2022-11-30 10:35:57 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2022-11-30 10:36:00 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2022-11-30 10:36:02 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2022-11-30 10:36:06 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2022-11-30 10:36:06 thread.c:880:create_pic_heart_beat_thread: create thread
2022-11-30 10:36:06 power_api.c:55:power_init: power init ... 
2022-11-30 10:36:06 driver-btm-api.c:1949:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2022-11-30 10:36:38 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
2022-11-30 10:36:43 power_api.c:124:check_voltage_multi: retry time: 0
2022-11-30 10:36:45 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.469053 
2022-11-30 10:36:47 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.101670 
2022-11-30 10:36:49 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.230254 
2022-11-30 10:36:49 power_api.c:97:get_average_voltage: aveage voltage is: 17.266992 
2022-11-30 10:36:49 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000 
2022-11-30 10:36:49 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2022-11-30 10:37:00 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 29 asic, times 0
2022-11-30 10:37:10 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 1
2022-11-30 10:37:20 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0
2022-11-30 10:37:30 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
2022-11-30 10:37:34 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2022-11-30 10:37:34 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
2022-11-30 10:37:34 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2022-11-30 10:37:34 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4
2022-11-30 10:37:34 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
2022-11-30 10:37:34 driver-btm-api.c:1693:check_clock_counter: freq 50 clock_counter_limit 6
2022-11-30 10:37:34 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 1, clock counter 0x00000006
2022-11-30 10:37:35 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2022-11-30 10:37:35 driver-btm-api.c:1981:bitmain_board_init: clock counter status was not good. Try reset.
2022-11-30 10:37:44 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0
2022-11-30 10:37:54 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0
2022-11-30 10:38:06 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
2022-11-30 10:38:09 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2022-11-30 10:38:09 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
2022-11-30 10:38:09 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2022-11-30 10:38:10 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4
2022-11-30 10:38:10 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
2022-11-30 10:38:10 driver-btm-api.c:1693:check_clock_counter: freq 50 clock_counter_limit 6
2022-11-30 10:38:10 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 1, clock counter 0x00000006
2022-11-30 10:38:10 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2022-11-30 10:38:10 driver-btm-api.c:1981:bitmain_board_init: clock counter status was not good. Try reset.
2022-11-30 10:38:21 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0
2022-11-30 10:38:30 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0
2022-11-30 10:38:41 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0
2022-11-30 10:38:44 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2022-11-30 10:38:44 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
2022-11-30 10:38:45 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2022-11-30 10:38:45 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4
2022-11-30 10:38:45 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0
2022-11-30 10:38:45 driver-btm-api.c:1693:check_clock_counter: freq 50 clock_counter_limit 6
2022-11-30 10:38:45 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 1, clock counter 0x00000006
2022-11-30 10:38:45 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2022-11-30 10:38:45 driver-btm-api.c:1981:bitmain_board_init: clock counter status was not good. Try reset.
2022-11-30 10:38:45 voltage[0] = 1690
2022-11-30 10:38:45 voltage[1] = 1690
2022-11-30 10:38:45 voltage[2] = 1690
2022-11-30 10:38:45 power_api.c:140:set_working_voltage: working_voltage = 16.900000
2022-11-30 10:38:46 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success.
2022-11-30 10:38:48 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success.
2022-11-30 10:38:49 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success.
2022-11-30 10:38:49 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2022-11-30 10:38:51 driver-btm-api.c:252:check_bringup_temp: Bring up temperature is 20
2022-11-30 10:38:51 thread.c:900:create_check_miner_status_thread: create thread
2022-11-30 10:38:51 thread.c:890:create_set_miner_status_thread: create thread
2022-11-30 10:38:51 driver-btm-api.c:613:calculate_timeout: dev->timeout = 392
2022-11-30 10:38:51 thread.c:875:create_temperature_monitor_thread: create thread
2022-11-30 10:38:51 freq_tuning.c:159:freq_tuning_get_max_freq: Max freq of tuning is 760
2022-11-30 10:38:51 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 18.00 ...
2022-11-30 10:39:23 power_api.c:124:check_voltage_multi: retry time: 0
2022-11-30 10:39:25 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.971142 
2022-11-30 10:39:27 power_api.c:86:get_average_voltage: chain[1], voltage is: 18.124219 
2022-11-30 10:39:29 power_api.c:86:get_average_voltage: chain[2], voltage is: 18.265049 
2022-11-30 10:39:29 power_api.c:97:get_average_voltage: aveage voltage is: 18.120136 
2022-11-30 10:41:38 driver-btm-api.c:644:set_timeout: freq 670 final timeout=175
2022-11-30 10:41:38 power_api.c:146:set_higher_voltage: higher_voltage = 17.900000
2022-11-30 10:41:38 power_api.c:428:slowly_set_iic_power_to_higher_voltage: slowly setting to voltage: 17.90 ...
2022-11-30 10:42:02 power_api.c:124:check_voltage_multi: retry time: 0
2022-11-30 10:42:03 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.891543 
2022-11-30 10:42:05 power_api.c:86:get_average_voltage: chain[1], voltage is: 18.093603 
2022-11-30 10:42:08 power_api.c:86:get_average_voltage: chain[2], voltage is: 18.271172 
2022-11-30 10:42:08 power_api.c:97:get_average_voltage: aveage voltage is: 18.085439 
2022-11-30 10:42:08 frequency.c:654:get_current_min_freq: current min freq 670
2022-11-30 10:42:08 driver-btm-api.c:1693:check_clock_counter: freq 670 clock_counter_limit 85
2022-11-30 10:42:11 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 1, asic = 5, core = 0, found 0, clock counter 0x00000000
2022-11-30 10:42:11 driver-btm-api.c:2139:bitmain_soc_init: clock count check failed after retry, wait for hash rate protect later.
2022-11-30 10:42:11 thread.c:895:create_check_system_status_thread: create thread
2022-11-30 10:42:12 driver-btm-api.c:2155:bitmain_soc_init: Init done!
2022-11-30 10:42:12 driver-btm-api.c:205:set_miner_status: STATUS_INIT
2022-11-30 10:42:16 driver-btm-api.c:205:set_miner_status: STATUS_OKAY
2022-11-30 10:42:22 driver-btm-api.c:1325:dhash_chip_send_job: Version num 4
2022-11-30 10:42:26 thread.c:401:check_working_voltage: current PCB min temperature is 34
2022-11-30 10:42:26 thread.c:402:check_working_voltage: current voltage is 17.90V, recovery to 16.90V
2022-11-30 10:42:26 power_api.c:397:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 16.90 ...
2022-11-30 10:43:00 power_api.c:124:check_voltage_multi: retry time: 0
2022-11-30 10:43:02 power_api.c:86:get_average_voltage: chain[0], voltage is: 16.881240 
2022-11-30 10:43:04 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.071054 
2022-11-30 10:43:05 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.236377 
2022-11-30 10:43:05 power_api.c:97:get_average_voltage: aveage voltage is: 17.062890 
2022-11-30 10:48:05 thread.c:441:is_zero_nonce_happened: chain_nonce[0] = 15422
2022-11-30 10:48:05 thread.c:441:is_zero_nonce_happened: chain_nonce[1] = 16147
2022-11-30 10:48:05 thread.c:441:is_zero_nonce_happened: chain_nonce[2] = 15531
2022-11-30 10:48:05 thread.c:497:clear_zero_nonce_mark: 0 nonce protect succeed.
Bitcoin Forum>Bitcoin>Mining>Mining support
Jump to: