Topic: T17 is showing only 2 hashboards of 3 running Braiin OS+ (Read 79 times)
it's very common for T17 hash boards to die due to hardware failure, it is unlikely to be a software-related issue, but you could try the stock firmware from Bitmain (avoid the latest version) and then post the kernel log, speaking of which you didn't post the correct logs, this is more of the system logs, Braiins OS+ has a different name for the kernel tab which I forgot, but I am positive it's called something else.
I am running Braiins OS+ on a Antminter T17, I am only seeing 2 of the hashboards coming up.
I have attached a grab of the Kernel Log. Any help would be greatly appreciated.
Thank you in advance.
Kernel Log
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] slcr mapped to d0800000
[ 0.000000] L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
[ 0.000000] L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
[ 0.000000] zynq_clock_init: clkc starts at d0800100
[ 0.000000] Zynq clock init
[ 0.000010] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
[ 0.000032] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
[ 0.000134] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
[ 0.000164] timer #0 at d0808000, irq=17
[ 0.000525] Console: colour dummy device 80x30
[ 0.000546] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090305] pid_max: default: 32768 minimum: 301
[ 0.090407] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090421] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090915] CPU: Testing write buffer coherency: ok
[ 0.091122] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091185] Setting up static identity map for 0x8280 - 0x82d8
[ 0.260294] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260368] Brought up 2 CPUs
[ 0.260387] SMP: Total of 2 processors activated (2664.03 BogoMIPS).
[ 0.260395] CPU: All CPU(s) started in SVC mode.
[ 0.265034] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.265472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.266370] pinctrl core: initialized pinctrl subsystem
[ 0.267707] NET: Registered protocol family 16
[ 0.269672] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.300295] cpuidle: using governor ladder
[ 0.320273] cpuidle: using governor menu
[ 0.333117] zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xd0880000
[ 0.333548] zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
[ 0.371958] GPIO IRQ not connected
[ 0.371975] XGpio: /amba_pl/gpio@41200000: registered, base is 902
[ 0.372160] GPIO IRQ not connected
[ 0.372172] XGpio: /amba_pl/gpio@41210000: registered, base is 897
[ 0.372417] XGpio: /amba_pl/gpio@41220000: registered, base is 895
[ 0.373265] vgaarb: loaded
[ 0.373705] SCSI subsystem initialized
[ 0.374092] usbcore: registered new interface driver usbfs
[ 0.374191] usbcore: registered new interface driver hub
[ 0.374297] usbcore: registered new device driver usb
[ 0.375063] i2c-gpio amba_pl:i2c-psu: using pins 895 (SDA) and 896 (SCL)
[ 0.375137] media: Linux media interface: v0.10
[ 0.375218] Linux video capture interface: v2.00
[ 0.375308] pps_core: LinuxPPS API ver. 1 registered
[ 0.375319] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.375367] PTP clock support registered
[ 0.375475] EDAC MC: Ver: 3.0.0
[ 0.376730] Advanced Linux Sound Architecture Driver Initialized.
[ 0.377913] clocksource: Switched to clocksource arm_global_timer
[ 0.387622] NET: Registered protocol family 2
[ 0.388417] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.388458] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.388506] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.388558] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.388590] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.388793] NET: Registered protocol family 1
[ 0.389152] RPC: Registered named UNIX socket transport module.
[ 0.389165] RPC: Registered udp transport module.
[ 0.389174] RPC: Registered tcp transport module.
[ 0.389223] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.389258] PCI: CLS 0 bytes, default 64
[ 0.389511] Trying to unpack rootfs image as initramfs...
[ 0.389763] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
[ 0.440390] Freeing initrd memory: 11664K (c749c000 - c8000000)
[ 0.441776] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.452878] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.465306] io scheduler noop registered
[ 0.465328] io scheduler deadline registered
[ 0.465379] io scheduler cfq registered (default)
[ 0.467348] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
[ 0.467368] dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.468143] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.469509] e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 143, base_baud = 6249999) is a xuartps
[ 1.134667] console [ttyPS0] enabled
[ 1.138831] xdevcfg f8007000.devcfg: ioremap 0xf8007000 to d0826000
[ 1.145524] [drm] Initialized drm 1.1.0 20060810
[ 1.161086] brd: module loaded
[ 1.170175] loop: module loaded
[ 1.176161] CAN device driver interface
[ 1.181392] libphy: MACB_mii_bus: probed
[ 1.258052] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 145 (c6:e9:b7:3c:7f:ae)
[ 1.267938] macb e000b000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
[ 1.279174] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.284922] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.296494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.302980] ehci-pci: EHCI PCI platform driver
[ 1.307539] usbcore: registered new interface driver usb-storage
[ 1.315048] mousedev: PS/2 mouse device common for all mice
[ 1.330994] i2c /dev entries driver
[ 1.338196] EDAC MC: ECC not enabled
[ 1.341972] Xilinx Zynq CpuIdle Driver started
[ 1.346664] sdhci: Secure Digital Host Controller Interface driver
[ 1.352800] sdhci: Copyright(c) Pierre Ossman
[ 1.357109] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.363133] sdhci-arasan e0100000.mmc: No vmmc regulator found
[ 1.368909] sdhci-arasan e0100000.mmc: No vqmmc regulator found
[ 1.407943] mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA
[ 1.415955] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.422312] usbcore: registered new interface driver usbhid
[ 1.427795] usbhid: USB HID core driver
[ 1.432622] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
[ 1.438926] nand: Macronix MX30LF2GE8AB
[ 1.442712] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.450578] Bad block table found at page 131008, version 0x01
[ 1.456779] Bad block table found at page 130944, version 0x01
[ 1.461267] mmc0: new high speed SDHC card at address aaaa
[ 1.468294] nand_read_bbt: bad block at 0x00000ff60000
[ 1.471884] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
[ 1.476090] mmcblk0: p1 p2
[ 1.480592] nand_read_bbt: bad block at 0x00000ff80000
[ 1.485674] nand_read_bbt: bad block at 0x00000ffa0000
[ 1.490816] nand_read_bbt: bad block at 0x00000ffc0000
[ 1.495969] 11 cmdlinepart partitions found on MTD device pl35x-nand
[ 1.502280] Creating 11 MTD partitions on "pl35x-nand":
[ 1.507467] 0x000000000000-0x000000080000 : "boot"
[ 1.513263] 0x000000080000-0x000000300000 : "uboot"
[ 1.529117] 0x000000300000-0x000000500000 : "fpga1"
[ 1.544911] 0x000000500000-0x000000700000 : "fpga2"
[ 1.550729] 0x000000700000-0x000000780000 : "uboot_env"
[ 1.556897] 0x000000780000-0x000000800000 : "miner_cfg"
[ 1.563061] 0x000000800000-0x000001e00000 : "recovery"
[ 1.579350] 0x000001e00000-0x000007d00000 : "firmware1"
[ 1.596077] 0x000007d00000-0x00000dc00000 : "firmware2"
[ 1.612829] 0x00000dc00000-0x000010000000 : "factory"
[ 1.629024] 0x000004800000-0x000005000000 : "antminer_configs"
[ 1.648577] nf_conntrack version 0.5.0 (3930 buckets, 15720 max)
[ 1.656395] NET: Registered protocol family 10
[ 1.662121] sit: IPv6 over IPv4 tunneling driver
[ 1.667462] NET: Registered protocol family 17
[ 1.671906] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.684455] can: controller area network core (rev 20120528 abi 9)
[ 1.690662] NET: Registered protocol family 29
[ 1.695033] can: raw protocol (rev 20120528)
[ 1.699305] can: broadcast manager protocol (rev 20120528 t)
[ 1.704930] can: netlink gateway (rev 20130117) max_hops=1
[ 1.710634] 8021q: 802.1Q VLAN Support v1.8
[ 1.715053] Registering SWP/SWPB emulation handler
[ 1.721386] hctosys: unable to open rtc device (rtc0)
[ 1.730835] ALSA device list:
[ 1.733722] No soundcards found.
[ 1.737534] RAMDISK: squashfs filesystem found at block 0
[ 1.742902] RAMDISK: Loading 11661KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
[ 2.044102] VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
[ 2.051361] Freeing unused kernel memory: 260K (c0747000 - c0788000)
[ 2.464375] init: Console is alive
[ 2.467865] init: - watchdog -
[ 2.825476] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.907995] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.925178] init: - preinit -
[ 3.263889] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.279783] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 3.337735] EXT4-fs (mmcblk0p2): recovery complete
[ 3.343965] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.404025] ubi0: attaching mtd10
[ 3.407899] random: procd urandom read with 5 bits of entropy available
[ 3.422431] ubi0: scanning is finished
[ 3.432790] ubi0: attached mtd10 (name "antminer_configs", size 8 MiB)
[ 3.439284] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 3.446096] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 3.452808] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[ 3.459568] ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
[ 3.465453] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 3.472681] ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 4092111497
[ 3.481808] ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
[ 3.490924] ubi0: background thread "ubi_bgt0d" started, PID 882
[ 3.525285] UBIFS (ubi0:0): recovery needed
[ 3.560790] UBIFS (ubi0:0): recovery deferred
[ 3.565146] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs", R/O mode
[ 3.573452] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 3.583335] UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
[ 3.593313] UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
[ 3.599563] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A7B047AA-FCA2-490F-BEC8-C09AFA0F8C3B, small LPT model
[ 4.247176] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.258103] macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
[ 5.266204] macb e000b000.ethernet eth0: link up (100/Full)
[ 5.271798] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.428370] mount_root: rootdisk overlay filesystem has not been formatted yet
[ 8.001045] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 8.515788] block: attempting to load /etc/config/fstab
[ 8.575974] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts:
[ 8.658098] mount_root: switched to extroot
[ 8.668507] urandom-seed: Seeding with /etc/urandom.seed
[ 8.745004] procd: - early -
[ 8.747862] procd: - watchdog -
[ 9.267990] macb e000b000.ethernet eth0: link down
[ 9.381997] procd: - watchdog -
[ 9.385268] procd: - ubus -
[ 9.477412] procd: - init -
[ 9.844602] kmodloader: loading kernel modules from /etc/modules.d/*
[ 9.922349] tun: Universal TUN/TAP device driver, 1.6
[ 9.927321] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 9.936713] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.949994] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.079598] xt_time: kernel timezone is -0000
[ 10.090335] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.993233] device eth0 entered promiscuous mode
[ 13.001257] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 13.288199] macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
[ 13.296320] macb e000b000.ethernet eth0: link up (100/Full)
[ 13.310827] br-lan: port 1(eth0) entered forwarding state
[ 13.316198] br-lan: port 1(eth0) entered forwarding state
[ 13.334591] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 13.895783] random: nonblocking pool is initialized
[ 15.307990] br-lan: port 1(eth0) entered forwarding state
Powered by Braiins OS+ for Slush Pool (2021-02-16-0-b0b90680-21.02-plus)
I have attached a grab of the Kernel Log. Any help would be greatly appreciated.
Thank you in advance.
Kernel Log
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] slcr mapped to d0800000
[ 0.000000] L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
[ 0.000000] L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
[ 0.000000] zynq_clock_init: clkc starts at d0800100
[ 0.000000] Zynq clock init
[ 0.000010] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
[ 0.000032] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
[ 0.000134] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
[ 0.000164] timer #0 at d0808000, irq=17
[ 0.000525] Console: colour dummy device 80x30
[ 0.000546] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090305] pid_max: default: 32768 minimum: 301
[ 0.090407] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090421] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090915] CPU: Testing write buffer coherency: ok
[ 0.091122] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091185] Setting up static identity map for 0x8280 - 0x82d8
[ 0.260294] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260368] Brought up 2 CPUs
[ 0.260387] SMP: Total of 2 processors activated (2664.03 BogoMIPS).
[ 0.260395] CPU: All CPU(s) started in SVC mode.
[ 0.265034] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.265472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.266370] pinctrl core: initialized pinctrl subsystem
[ 0.267707] NET: Registered protocol family 16
[ 0.269672] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.300295] cpuidle: using governor ladder
[ 0.320273] cpuidle: using governor menu
[ 0.333117] zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xd0880000
[ 0.333548] zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
[ 0.371958] GPIO IRQ not connected
[ 0.371975] XGpio: /amba_pl/gpio@41200000: registered, base is 902
[ 0.372160] GPIO IRQ not connected
[ 0.372172] XGpio: /amba_pl/gpio@41210000: registered, base is 897
[ 0.372417] XGpio: /amba_pl/gpio@41220000: registered, base is 895
[ 0.373265] vgaarb: loaded
[ 0.373705] SCSI subsystem initialized
[ 0.374092] usbcore: registered new interface driver usbfs
[ 0.374191] usbcore: registered new interface driver hub
[ 0.374297] usbcore: registered new device driver usb
[ 0.375063] i2c-gpio amba_pl:i2c-psu: using pins 895 (SDA) and 896 (SCL)
[ 0.375137] media: Linux media interface: v0.10
[ 0.375218] Linux video capture interface: v2.00
[ 0.375308] pps_core: LinuxPPS API ver. 1 registered
[ 0.375319] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.375367] PTP clock support registered
[ 0.375475] EDAC MC: Ver: 3.0.0
[ 0.376730] Advanced Linux Sound Architecture Driver Initialized.
[ 0.377913] clocksource: Switched to clocksource arm_global_timer
[ 0.387622] NET: Registered protocol family 2
[ 0.388417] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.388458] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.388506] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.388558] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.388590] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.388793] NET: Registered protocol family 1
[ 0.389152] RPC: Registered named UNIX socket transport module.
[ 0.389165] RPC: Registered udp transport module.
[ 0.389174] RPC: Registered tcp transport module.
[ 0.389223] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.389258] PCI: CLS 0 bytes, default 64
[ 0.389511] Trying to unpack rootfs image as initramfs...
[ 0.389763] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
[ 0.440390] Freeing initrd memory: 11664K (c749c000 - c8000000)
[ 0.441776] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.452878] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.465306] io scheduler noop registered
[ 0.465328] io scheduler deadline registered
[ 0.465379] io scheduler cfq registered (default)
[ 0.467348] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
[ 0.467368] dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.468143] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.469509] e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 143, base_baud = 6249999) is a xuartps
[ 1.134667] console [ttyPS0] enabled
[ 1.138831] xdevcfg f8007000.devcfg: ioremap 0xf8007000 to d0826000
[ 1.145524] [drm] Initialized drm 1.1.0 20060810
[ 1.161086] brd: module loaded
[ 1.170175] loop: module loaded
[ 1.176161] CAN device driver interface
[ 1.181392] libphy: MACB_mii_bus: probed
[ 1.258052] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 145 (c6:e9:b7:3c:7f:ae)
[ 1.267938] macb e000b000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
[ 1.279174] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.284922] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.296494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.302980] ehci-pci: EHCI PCI platform driver
[ 1.307539] usbcore: registered new interface driver usb-storage
[ 1.315048] mousedev: PS/2 mouse device common for all mice
[ 1.330994] i2c /dev entries driver
[ 1.338196] EDAC MC: ECC not enabled
[ 1.341972] Xilinx Zynq CpuIdle Driver started
[ 1.346664] sdhci: Secure Digital Host Controller Interface driver
[ 1.352800] sdhci: Copyright(c) Pierre Ossman
[ 1.357109] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.363133] sdhci-arasan e0100000.mmc: No vmmc regulator found
[ 1.368909] sdhci-arasan e0100000.mmc: No vqmmc regulator found
[ 1.407943] mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA
[ 1.415955] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.422312] usbcore: registered new interface driver usbhid
[ 1.427795] usbhid: USB HID core driver
[ 1.432622] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
[ 1.438926] nand: Macronix MX30LF2GE8AB
[ 1.442712] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.450578] Bad block table found at page 131008, version 0x01
[ 1.456779] Bad block table found at page 130944, version 0x01
[ 1.461267] mmc0: new high speed SDHC card at address aaaa
[ 1.468294] nand_read_bbt: bad block at 0x00000ff60000
[ 1.471884] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
[ 1.476090] mmcblk0: p1 p2
[ 1.480592] nand_read_bbt: bad block at 0x00000ff80000
[ 1.485674] nand_read_bbt: bad block at 0x00000ffa0000
[ 1.490816] nand_read_bbt: bad block at 0x00000ffc0000
[ 1.495969] 11 cmdlinepart partitions found on MTD device pl35x-nand
[ 1.502280] Creating 11 MTD partitions on "pl35x-nand":
[ 1.507467] 0x000000000000-0x000000080000 : "boot"
[ 1.513263] 0x000000080000-0x000000300000 : "uboot"
[ 1.529117] 0x000000300000-0x000000500000 : "fpga1"
[ 1.544911] 0x000000500000-0x000000700000 : "fpga2"
[ 1.550729] 0x000000700000-0x000000780000 : "uboot_env"
[ 1.556897] 0x000000780000-0x000000800000 : "miner_cfg"
[ 1.563061] 0x000000800000-0x000001e00000 : "recovery"
[ 1.579350] 0x000001e00000-0x000007d00000 : "firmware1"
[ 1.596077] 0x000007d00000-0x00000dc00000 : "firmware2"
[ 1.612829] 0x00000dc00000-0x000010000000 : "factory"
[ 1.629024] 0x000004800000-0x000005000000 : "antminer_configs"
[ 1.648577] nf_conntrack version 0.5.0 (3930 buckets, 15720 max)
[ 1.656395] NET: Registered protocol family 10
[ 1.662121] sit: IPv6 over IPv4 tunneling driver
[ 1.667462] NET: Registered protocol family 17
[ 1.671906] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.684455] can: controller area network core (rev 20120528 abi 9)
[ 1.690662] NET: Registered protocol family 29
[ 1.695033] can: raw protocol (rev 20120528)
[ 1.699305] can: broadcast manager protocol (rev 20120528 t)
[ 1.704930] can: netlink gateway (rev 20130117) max_hops=1
[ 1.710634] 8021q: 802.1Q VLAN Support v1.8
[ 1.715053] Registering SWP/SWPB emulation handler
[ 1.721386] hctosys: unable to open rtc device (rtc0)
[ 1.730835] ALSA device list:
[ 1.733722] No soundcards found.
[ 1.737534] RAMDISK: squashfs filesystem found at block 0
[ 1.742902] RAMDISK: Loading 11661KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
[ 2.044102] VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
[ 2.051361] Freeing unused kernel memory: 260K (c0747000 - c0788000)
[ 2.464375] init: Console is alive
[ 2.467865] init: - watchdog -
[ 2.825476] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.907995] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.925178] init: - preinit -
[ 3.263889] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.279783] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 3.337735] EXT4-fs (mmcblk0p2): recovery complete
[ 3.343965] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.404025] ubi0: attaching mtd10
[ 3.407899] random: procd urandom read with 5 bits of entropy available
[ 3.422431] ubi0: scanning is finished
[ 3.432790] ubi0: attached mtd10 (name "antminer_configs", size 8 MiB)
[ 3.439284] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 3.446096] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 3.452808] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[ 3.459568] ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
[ 3.465453] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 3.472681] ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 4092111497
[ 3.481808] ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
[ 3.490924] ubi0: background thread "ubi_bgt0d" started, PID 882
[ 3.525285] UBIFS (ubi0:0): recovery needed
[ 3.560790] UBIFS (ubi0:0): recovery deferred
[ 3.565146] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs", R/O mode
[ 3.573452] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 3.583335] UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
[ 3.593313] UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
[ 3.599563] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A7B047AA-FCA2-490F-BEC8-C09AFA0F8C3B, small LPT model
[ 4.247176] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.258103] macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
[ 5.266204] macb e000b000.ethernet eth0: link up (100/Full)
[ 5.271798] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.428370] mount_root: rootdisk overlay filesystem has not been formatted yet
[ 8.001045] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 8.515788] block: attempting to load /etc/config/fstab
[ 8.575974] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts:
[ 8.658098] mount_root: switched to extroot
[ 8.668507] urandom-seed: Seeding with /etc/urandom.seed
[ 8.745004] procd: - early -
[ 8.747862] procd: - watchdog -
[ 9.267990] macb e000b000.ethernet eth0: link down
[ 9.381997] procd: - watchdog -
[ 9.385268] procd: - ubus -
[ 9.477412] procd: - init -
[ 9.844602] kmodloader: loading kernel modules from /etc/modules.d/*
[ 9.922349] tun: Universal TUN/TAP device driver, 1.6
[ 9.927321] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 9.936713] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.949994] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.079598] xt_time: kernel timezone is -0000
[ 10.090335] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.993233] device eth0 entered promiscuous mode
[ 13.001257] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 13.288199] macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
[ 13.296320] macb e000b000.ethernet eth0: link up (100/Full)
[ 13.310827] br-lan: port 1(eth0) entered forwarding state
[ 13.316198] br-lan: port 1(eth0) entered forwarding state
[ 13.334591] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 13.895783] random: nonblocking pool is initialized
[ 15.307990] br-lan: port 1(eth0) entered forwarding state
Powered by Braiins OS+ for Slush Pool (2021-02-16-0-b0b90680-21.02-plus)
Jump to: