Author

Topic: T9+ J4 Chains Have No Hashrate (Read 86 times)

newbie
Activity: 4
Merit: 0
August 14, 2021, 11:19:39 AM
#5
Ok! I'll give that a shot and let you know how it goes, thanks!
legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
August 14, 2021, 10:43:49 AM
#4
Take a look at these last logs under Kernel (2)

Code:
Read temp failed, set fixed full fan speed

It could be a temp sensor it might be broken/damaged or one of your hashboard is overheating that is why it's stop mining.

I would suggest you run the hashboards one by one to test which one has broken sensor.
More troubleshooting guide can be found here https://support.bitmain.com/hc/en-us/articles/220872007-Possible-problems-and-solutions-for-S7-S9-fixed-frequency-L3-
newbie
Activity: 4
Merit: 0
August 13, 2021, 05:09:29 PM
#3
Kernel (2):
Code:
driver-btm-c5.c:11856:T9_18_getASICnum: T9+ try get asic num for the 1 time
driver-btm-c5.c:11867:T9_18_getASICnum: Chain[J2] has 18 asic
driver-btm-c5.c:11867:T9_18_getASICnum: Chain[J3] has 18 asic
driver-btm-c5.c:11867:T9_18_getASICnum: Chain[J4] has 18 asic
driver-btm-c5.c:11867:T9_18_getASICnum: Chain[J9] has 18 asic
driver-btm-c5.c:11867:T9_18_getASICnum: Chain[J10] has 18 asic
driver-btm-c5.c:11867:T9_18_getASICnum: Chain[J11] has 18 asic
driver-btm-c5.c:11867:T9_18_getASICnum: Chain[J12] has 18 asic
driver-btm-c5.c:11867:T9_18_getASICnum: Chain[J13] has 18 asic
driver-btm-c5.c:11867:T9_18_getASICnum: Chain[J14] has 18 asic
driver-btm-c5.c:4399:set_frequency: Chain[J2] has no freq in PIC, set default freq=550M
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[00] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[01] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[02] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[03] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[04] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[05] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[06] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[07] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[08] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[09] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[10] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[11] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[12] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[13] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[14] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[15] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[16] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J2] Aisc[17] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[00] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[01] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[02] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[03] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[04] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[05] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[06] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[07] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[08] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[09] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[10] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[11] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[12] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[13] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[14] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[15] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[16] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J9] Aisc[17] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[00] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[01] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[02] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[03] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[04] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[05] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[06] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[07] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[08] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[09] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[10] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[11] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[12] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[13] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[14] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[15] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[16] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J10] Aisc[17] original freq=550 adjusted freq:456
driver-btm-c5.c:4502:set_frequency: Chain[J2] has no core num in PIC
driver-btm-c5.c:4399:set_frequency: Chain[J3] has no freq in PIC, set default freq=550M
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[00] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[01] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[02] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[03] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[04] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[05] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[06] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[07] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[08] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[09] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[10] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[11] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[12] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[13] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[14] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[15] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[16] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J3] Aisc[17] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[00] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[01] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[02] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[03] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[04] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[05] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[06] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[07] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[08] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[09] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[10] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[11] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[12] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[13] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[14] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[15] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[16] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J11] Aisc[17] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[00] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[01] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[02] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[03] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[04] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[05] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[06] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[07] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[08] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[09] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[10] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[11] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[12] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[13] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[14] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[15] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[16] original freq=550 adjusted freq:456
btm_adjust_hash.c:791:set_asic_freq: Chain[J12] Aisc[17] original freq=550 adjusted freq:456
driver-btm-c5.c:4502:set_frequency: Chain[J3] has no core num in PIC
driver-btm-c5.c:4502:set_frequency: Chain[J4] has no core num in PIC
driver-btm-c5.c:4502:set_frequency: Chain[J9] has no core num in PIC
driver-btm-c5.c:4502:set_frequency: Chain[J10] has no core num in PIC
driver-btm-c5.c:4502:set_frequency: Chain[J11] has no core num in PIC
driver-btm-c5.c:4502:set_frequency: Chain[J12] has no core num in PIC
driver-btm-c5.c:4502:set_frequency: Chain[J13] has no core num in PIC
driver-btm-c5.c:4502:set_frequency: Chain[J14] has no core num in PIC
driver-btm-c5.c:4583:set_frequency: miner total rate=8624GH/s ideal_total_hash_rate = 8500GH/s
driver-btm-c5.c:4608:set_frequency: read PIC voltage=890 on chain[1]
driver-btm-c5.c:4610:set_frequency: Chain:1 chipnum=18
driver-btm-c5.c:4620:set_frequency: Chain[J2] voltage added=0.255V
driver-btm-c5.c:4681:set_frequency: Chain:1 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:4821:set_frequency: Chain:1 max freq=456
driver-btm-c5.c:4822:set_frequency: Chain:1 min freq=456

driver-btm-c5.c:4608:set_frequency: read PIC voltage=890 on chain[2]
driver-btm-c5.c:4610:set_frequency: Chain:2 chipnum=18
driver-btm-c5.c:4620:set_frequency: Chain[J3] voltage added=0.255V
driver-btm-c5.c:4681:set_frequency: Chain:2 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:4821:set_frequency: Chain:2 max freq=456
driver-btm-c5.c:4822:set_frequency: Chain:2 min freq=456

driver-btm-c5.c:4608:set_frequency: read PIC voltage=890 on chain[3]
driver-btm-c5.c:4610:set_frequency: Chain:3 chipnum=18
driver-btm-c5.c:4620:set_frequency: Chain[J4] voltage added=0.0V
driver-btm-c5.c:4681:set_frequency: Chain:3 base freq=550
Asic[ 0]:487 Asic[ 1]:487 Asic[ 2]:487 Asic[ 3]:487 Asic[ 4]:487 Asic[ 5]:487 Asic[ 6]:487 Asic[ 7]:487
Asic[ 8]:487 Asic[ 9]:487 Asic[10]:487 Asic[11]:487 Asic[12]:487 Asic[13]:487 Asic[14]:487 Asic[15]:487
Asic[16]:487 Asic[17]:487
driver-btm-c5.c:4821:set_frequency: Chain:3 max freq=487
driver-btm-c5.c:4822:set_frequency: Chain:3 min freq=487

driver-btm-c5.c:4608:set_frequency: read PIC voltage=890 on chain[8]
driver-btm-c5.c:4610:set_frequency: Chain:8 chipnum=18
driver-btm-c5.c:4620:set_frequency: Chain[J9] voltage added=0.255V
driver-btm-c5.c:4681:set_frequency: Chain:8 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:4821:set_frequency: Chain:8 max freq=456
driver-btm-c5.c:4822:set_frequency: Chain:8 min freq=456

driver-btm-c5.c:4608:set_frequency: read PIC voltage=890 on chain[9]
driver-btm-c5.c:4610:set_frequency: Chain:9 chipnum=18
driver-btm-c5.c:4620:set_frequency: Chain[J10] voltage added=0.255V
driver-btm-c5.c:4681:set_frequency: Chain:9 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:4821:set_frequency: Chain:9 max freq=456
driver-btm-c5.c:4822:set_frequency: Chain:9 min freq=456

driver-btm-c5.c:4608:set_frequency: read PIC voltage=890 on chain[10]
driver-btm-c5.c:4610:set_frequency: Chain:10 chipnum=18
driver-btm-c5.c:4620:set_frequency: Chain[J11] voltage added=0.255V
driver-btm-c5.c:4681:set_frequency: Chain:10 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:4821:set_frequency: Chain:10 max freq=456
driver-btm-c5.c:4822:set_frequency: Chain:10 min freq=456

driver-btm-c5.c:4608:set_frequency: read PIC voltage=890 on chain[11]
driver-btm-c5.c:4610:set_frequency: Chain:11 chipnum=18
driver-btm-c5.c:4620:set_frequency: Chain[J12] voltage added=0.255V
driver-btm-c5.c:4681:set_frequency: Chain:11 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:4821:set_frequency: Chain:11 max freq=456
driver-btm-c5.c:4822:set_frequency: Chain:11 min freq=456

driver-btm-c5.c:4608:set_frequency: read PIC voltage=890 on chain[12]
driver-btm-c5.c:4610:set_frequency: Chain:12 chipnum=18
driver-btm-c5.c:4620:set_frequency: Chain[J13] voltage added=0.0V
driver-btm-c5.c:4681:set_frequency: Chain:12 base freq=550
Asic[ 0]:487 Asic[ 1]:487 Asic[ 2]:487 Asic[ 3]:487 Asic[ 4]:487 Asic[ 5]:487 Asic[ 6]:487 Asic[ 7]:487
Asic[ 8]:487 Asic[ 9]:487 Asic[10]:487 Asic[11]:487 Asic[12]:487 Asic[13]:487 Asic[14]:487 Asic[15]:487
Asic[16]:487 Asic[17]:487
driver-btm-c5.c:4821:set_frequency: Chain:12 max freq=487
driver-btm-c5.c:4822:set_frequency: Chain:12 min freq=487

driver-btm-c5.c:4608:set_frequency: read PIC voltage=890 on chain[13]
driver-btm-c5.c:4610:set_frequency: Chain:13 chipnum=18
driver-btm-c5.c:4620:set_frequency: Chain[J14] voltage added=0.0V
driver-btm-c5.c:4681:set_frequency: Chain:13 base freq=550
Asic[ 0]:493 Asic[ 1]:493 Asic[ 2]:493 Asic[ 3]:493 Asic[ 4]:493 Asic[ 5]:493 Asic[ 6]:493 Asic[ 7]:493
Asic[ 8]:493 Asic[ 9]:493 Asic[10]:493 Asic[11]:493 Asic[12]:493 Asic[13]:493 Asic[14]:493 Asic[15]:493
Asic[16]:493 Asic[17]:493
driver-btm-c5.c:4821:set_frequency: Chain:13 max freq=493
driver-btm-c5.c:4822:set_frequency: Chain:13 min freq=493


driver-btm-c5.c:4831:set_frequency: Miner fix freq ...
driver-btm-c5.c:4866:set_frequency: read PIC voltage=890 on chain[1]
driver-btm-c5.c:4867:set_frequency: Chain:1 chipnum=18
driver-btm-c5.c:4876:set_frequency: Chain[J2] voltage added=0.255V
driver-btm-c5.c:4944:set_frequency: Chain:1 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:5122:set_frequency: Chain:1 max freq=456
driver-btm-c5.c:5123:set_frequency: Chain:1 min freq=456

driver-btm-c5.c:4866:set_frequency: read PIC voltage=890 on chain[2]
driver-btm-c5.c:4867:set_frequency: Chain:2 chipnum=18
driver-btm-c5.c:4876:set_frequency: Chain[J3] voltage added=0.255V
driver-btm-c5.c:4944:set_frequency: Chain:2 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:5122:set_frequency: Chain:2 max freq=456
driver-btm-c5.c:5123:set_frequency: Chain:2 min freq=456

driver-btm-c5.c:4866:set_frequency: read PIC voltage=890 on chain[3]
driver-btm-c5.c:4867:set_frequency: Chain:3 chipnum=18
driver-btm-c5.c:4876:set_frequency: Chain[J4] voltage added=0.0V
driver-btm-c5.c:4944:set_frequency: Chain:3 base freq=550
Asic[ 0]:487 Asic[ 1]:487 Asic[ 2]:487 Asic[ 3]:487 Asic[ 4]:487 Asic[ 5]:487 Asic[ 6]:487 Asic[ 7]:487
Asic[ 8]:487 Asic[ 9]:487 Asic[10]:487 Asic[11]:487 Asic[12]:487 Asic[13]:487 Asic[14]:487 Asic[15]:487
Asic[16]:487 Asic[17]:487
driver-btm-c5.c:5122:set_frequency: Chain:3 max freq=487
driver-btm-c5.c:5123:set_frequency: Chain:3 min freq=487

driver-btm-c5.c:4866:set_frequency: read PIC voltage=890 on chain[8]
driver-btm-c5.c:4867:set_frequency: Chain:8 chipnum=18
driver-btm-c5.c:4876:set_frequency: Chain[J9] voltage added=0.255V
driver-btm-c5.c:4944:set_frequency: Chain:8 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:5122:set_frequency: Chain:8 max freq=456
driver-btm-c5.c:5123:set_frequency: Chain:8 min freq=456

driver-btm-c5.c:4866:set_frequency: read PIC voltage=890 on chain[9]
driver-btm-c5.c:4867:set_frequency: Chain:9 chipnum=18
driver-btm-c5.c:4876:set_frequency: Chain[J10] voltage added=0.255V
driver-btm-c5.c:4944:set_frequency: Chain:9 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:5122:set_frequency: Chain:9 max freq=456
driver-btm-c5.c:5123:set_frequency: Chain:9 min freq=456

driver-btm-c5.c:4866:set_frequency: read PIC voltage=890 on chain[10]
driver-btm-c5.c:4867:set_frequency: Chain:10 chipnum=18
driver-btm-c5.c:4876:set_frequency: Chain[J11] voltage added=0.255V
driver-btm-c5.c:4944:set_frequency: Chain:10 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:5122:set_frequency: Chain:10 max freq=456
driver-btm-c5.c:5123:set_frequency: Chain:10 min freq=456

driver-btm-c5.c:4866:set_frequency: read PIC voltage=890 on chain[11]
driver-btm-c5.c:4867:set_frequency: Chain:11 chipnum=18
driver-btm-c5.c:4876:set_frequency: Chain[J12] voltage added=0.255V
driver-btm-c5.c:4944:set_frequency: Chain:11 base freq=550
Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456
Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456
Asic[16]:456 Asic[17]:456
driver-btm-c5.c:5122:set_frequency: Chain:11 max freq=456
driver-btm-c5.c:5123:set_frequency: Chain:11 min freq=456

driver-btm-c5.c:4866:set_frequency: read PIC voltage=890 on chain[12]
driver-btm-c5.c:4867:set_frequency: Chain:12 chipnum=18
driver-btm-c5.c:4876:set_frequency: Chain[J13] voltage added=0.0V
driver-btm-c5.c:4944:set_frequency: Chain:12 base freq=550
Asic[ 0]:487 Asic[ 1]:487 Asic[ 2]:487 Asic[ 3]:487 Asic[ 4]:487 Asic[ 5]:487 Asic[ 6]:487 Asic[ 7]:487
Asic[ 8]:487 Asic[ 9]:487 Asic[10]:487 Asic[11]:487 Asic[12]:487 Asic[13]:487 Asic[14]:487 Asic[15]:487
Asic[16]:487 Asic[17]:487
driver-btm-c5.c:5122:set_frequency: Chain:12 max freq=487
driver-btm-c5.c:5123:set_frequency: Chain:12 min freq=487

driver-btm-c5.c:4866:set_frequency: read PIC voltage=890 on chain[13]
driver-btm-c5.c:4867:set_frequency: Chain:13 chipnum=18
driver-btm-c5.c:4876:set_frequency: Chain[J14] voltage added=0.0V
driver-btm-c5.c:4944:set_frequency: Chain:13 base freq=550
Asic[ 0]:493 Asic[ 1]:493 Asic[ 2]:493 Asic[ 3]:493 Asic[ 4]:493 Asic[ 5]:493 Asic[ 6]:493 Asic[ 7]:493
Asic[ 8]:493 Asic[ 9]:493 Asic[10]:493 Asic[11]:493 Asic[12]:493 Asic[13]:493 Asic[14]:493 Asic[15]:493
Asic[16]:493 Asic[17]:493
driver-btm-c5.c:5122:set_frequency: Chain:13 max freq=493
driver-btm-c5.c:5123:set_frequency: Chain:13 min freq=493

driver-btm-c5.c:5131:set_frequency: max freq = 493
driver-btm-c5.c:9614:init_uart_baud: set baud=1
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J9] PIC temp offset: 1,5,0,0,0,0,33,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[9] temp chip I2C addr=0x98
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J9] chip[0] use PIC middle temp offset=5 typeID=41
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[9] chip[0] local:21 remote:15 offset:35
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J9] chip[0] get middle temp offset=35 typeID=41
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J11] PIC temp offset: 1,4,0,0,0,0,33,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[11] temp chip I2C addr=0x98
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J11] chip[0] use PIC middle temp offset=4 typeID=41
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[11] chip[0] local:23 remote:18 offset:34
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J11] chip[0] get middle temp offset=34 typeID=41
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J13] PIC temp offset: -1,-1,-1,-1,-1,-1,-1,-1,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[13] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[13] has no middle temp, use special fix mode.
driver-btm-c5.c:6777:calibration_sensor_offset: Warning: Chain[J13] has no temp offset in PIC! will fix it
driver-btm-c5.c:6901:calibration_sensor_offset: Chain[J13] use default temp chip[0]
driver-btm-c5.c:6331:do_calibration_sensor_offset: Chain[J13] try read temp chip[0] ID=41 (I2C addr=0x98)
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[13] chip[0] local:21 remote:16 offset:34
driver-btm-c5.c:6906:calibration_sensor_offset: Chain[J13] chip[0] get middle temp offset=34 typeID=41
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:13851:bitmain_c5_init: open core on chain[1] [8] [9]...
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:13868:bitmain_c5_init: open core on chain[2] [10] [11]...
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:13884:bitmain_c5_init: open core on chain[3] [12] [13]...
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 9 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[1] set voltage to 880
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 9 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[2] set voltage to 880
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 9 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 880
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 11 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[1] set voltage to 870
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 11 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[2] set voltage to 870
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 11 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 870
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 14 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[1] set voltage to 860
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 14 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[2] set voltage to 860
driver-btm-c5.c:9785:pic_heart_beat_func: chain[1] heart beat fail 1 times.
driver-btm-c5.c:9785:pic_heart_beat_func: chain[2] heart beat fail 1 times.
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 14 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 860
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 17 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[1] set voltage to 850
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 17 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[2] set voltage to 850
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 17 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 850
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 20 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[1] set voltage to 840
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 20 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[2] set voltage to 840
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 20 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 840
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 24 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[1] set voltage to 830
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 24 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[2] set voltage to 830
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 24 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 830
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 28 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[1] set voltage to 820
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 28 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[2] set voltage to 820
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 28 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 820
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 33 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 810
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 39 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 800
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 46 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 790
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 54 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 780
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 65 seccessful
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[3] set voltage to 770
driver-btm-c5.c:14027:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=225 total_tv_end_sys=226
driver-btm-c5.c:10330:check_system_work: restartNum = 2 , auto-reinit enabled...
util.c:3207:initiate_stratum: mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer T9+/10000"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 1, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer T9+/10000"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 2, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer T9+/10000"]}
driver-btm-c5.c:8738:read_temp_func: bring_up_pcb_temp = 43
do read_temp_func once...

get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=55.7500 Asic[02]=48.8380 Asic[03]=51.5890 Asic[04]=49.5930 Asic[05]=52.1770 Asic[06]=53.4180 Asic[07]=51.6900 Asic[08]=50.4820
Asic[09]=49.0730 Asic[10]=49.5260 Asic[11]=51.8750 Asic[12]=50.3650 Asic[13]=51.0190 Asic[14]=51.1030 Asic[15]=51.8910 Asic[16]=54.9950
Asic[17]=48.9220 Asic[18]=53.1830

get RT hashrate from Chain[2]: (asic index start from 1-18)
Asic[01]=50.8850 Asic[02]=49.5760 Asic[03]=52.2440 Asic[04]=50.8180 Asic[05]=53.2000 Asic[06]=50.5660 Asic[07]=57.3100 Asic[08]=54.6930
Asic[09]=50.1470 Asic[10]=53.2670 Asic[11]=56.0860 Asic[12]=52.1100 Asic[13]=53.8540 Asic[14]=51.4550 Asic[15]=55.0290 Asic[16]=48.3680
Asic[17]=50.3310 Asic[18]=52.5120

get RT hashrate from Chain[3]: (asic index start from 1-18)

get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=52.9320 Asic[02]=49.5590 Asic[03]=54.9950 Asic[04]=52.1770 Asic[05]=54.8780 Asic[06]=52.9650 Asic[07]=51.7240 Asic[08]=51.4380
Asic[09]=50.7000 Asic[10]=54.8270 Asic[11]=49.7610 Asic[12]=46.7910 Asic[13]=50.6500 Asic[14]=48.2000 Asic[15]=53.4520 Asic[16]=49.5430
Asic[17]=52.9820 Asic[18]=53.1660

get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=48.7210 Asic[02]=54.8610 Asic[03]=49.6940 Asic[04]=47.7810 Asic[05]=55.8010 Asic[06]=47.8310 Asic[07]=51.9250 Asic[08]=52.6460
Asic[09]=47.8150 Asic[10]=47.4290 Asic[11]=47.7980 Asic[12]=48.6030 Asic[13]=52.4790 Asic[14]=52.7300 Asic[15]=46.4560 Asic[16]=59.8270
Asic[17]=51.5730 Asic[18]=48.3510

get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=51.5060 Asic[02]=50.1470 Asic[03]=50.2810 Asic[04]=54.9280 Asic[05]=49.2410 Asic[06]=53.0490 Asic[07]=51.9250 Asic[08]=50.0460
Asic[09]=53.3850 Asic[10]=52.3610 Asic[11]=55.3310 Asic[12]=52.8980 Asic[13]=49.0060 Asic[14]=52.2940 Asic[15]=53.4180 Asic[16]=55.5820
Asic[17]=51.7570 Asic[18]=54.8780

get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=51.8580 Asic[02]=49.3410 Asic[03]=47.3780 Asic[04]=52.4120 Asic[05]=48.0490 Asic[06]=51.8750 Asic[07]=47.7310 Asic[08]=48.9890
Asic[09]=55.1130 Asic[10]=48.5360 Asic[11]=59.5080 Asic[12]=54.8610 Asic[13]=51.4720 Asic[14]=49.4420 Asic[15]=52.2440 Asic[16]=53.0830
Asic[17]=46.6230 Asic[18]=47.6130

get RT hashrate from Chain[12]: (asic index start from 1-18)

get RT hashrate from Chain[13]: (asic index start from 1-18)
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Check Chain[J4] ASIC RT error: (asic index start from 1-18)
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Check Chain[J13] ASIC RT error: (asic index start from 1-18)
Check Chain[J14] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
Chain[8] Chip[0] pcb temperature=43
Chain[8] Chip[1] junction temperature=49
Special fix Chain[8] Chip[1] middle Temp = 58
Done read temp on Chain[8]
Chain[10] Chip[0] pcb temperature=42
Chain[10] Chip[1] junction temperature=47
Special fix Chain[10] Chip[1] middle Temp = 57
Done read temp on Chain[10]
read failed on Chain[12] Chip[1] middle Temp old value:15
Special fix Chain[12] Chip[1] middle Temp = 15
Done read temp on Chain[12]
Max pcb temp : 43
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=61
newbie
Activity: 4
Merit: 0
August 13, 2021, 02:54:16 PM
#2
Kernel (1):
Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06e8cf4   (7044 kB)
[    0.000000]       .init : 0xc06e9000 - 0xc071d480   ( 210 kB)
[    0.000000]       .data : 0xc071e000 - 0xc0767058   ( 293 kB)
[    0.000000]        .bss : 0xc0767064 - 0xc07a7d64   ( 260 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000291] ps7-ttc #0 at df804000, irq=43
[    0.000593] Console: colour dummy device 80x30
[    0.000623] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040194] pid_max: default: 32768 minimum: 301
[    0.040403] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040422] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042592] CPU: Testing write buffer coherency: ok
[    0.042905] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042961] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[    0.043181] L310 cache controller enabled
[    0.043200] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120989] CPU1: Booted secondary processor
[    0.210216] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210347] Brought up 2 CPUs
[    0.210367] SMP: Total of 2 processors activated.
[    0.210375] CPU: All CPU(s) started in SVC mode.
[    0.211033] devtmpfs: initialized
[    0.213478] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214669] regulator-dummy: no parameters
[    0.222064] NET: Registered protocol family 16
[    0.224330] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226609] cpuidle: using governor ladder
[    0.226621] cpuidle: using governor menu
[    0.233990] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235517] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235530] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235637] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.258030] bio: create slab at 0
[    0.259394] vgaarb: loaded
[    0.260088] SCSI subsystem initialized
[    0.261132] usbcore: registered new interface driver usbfs
[    0.261310] usbcore: registered new interface driver hub
[    0.261531] usbcore: registered new device driver usb
[    0.262055] media: Linux media interface: v0.10
[    0.262222] Linux video capture interface: v2.00
[    0.262464] pps_core: LinuxPPS API ver. 1 registered
[    0.262476] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[    0.262605] PTP clock support registered
[    0.262963] EDAC MC: Ver: 3.0.0
[    0.264020] Advanced Linux Sound Architecture Driver Initialized.
[    0.266752] DMA-API: preallocated 4096 debug entries
[    0.266764] DMA-API: debugging enabled by kernel config
[    0.266834] Switched to clocksource arm_global_timer
[    0.287439] NET: Registered protocol family 2
[    0.288071] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.288128] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.288212] TCP: Hash tables configured (established 4096 bind 4096)
[    0.288260] TCP: reno registered
[    0.288276] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.288308] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288544] NET: Registered protocol family 1
[    0.288861] RPC: Registered named UNIX socket transport module.
[    0.288873] RPC: Registered udp transport module.
[    0.288882] RPC: Registered tcp transport module.
[    0.288890] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288902] PCI: CLS 0 bytes, default 64
[    0.289322] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291295] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293370] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293559] msgmni has been set to 967
[    0.294319] io scheduler noop registered
[    0.294332] io scheduler deadline registered
[    0.294373] io scheduler cfq registered (default)
[    0.306025] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.306046] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.428903] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.996808] console [ttyPS0] enabled
[    1.001076] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.008704] [drm] Initialized drm 1.1.0 20060810
[    1.025809] brd: module loaded
[    1.035185] loop: module loaded
[    1.044548] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.050369] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.058212] libphy: XEMACPS mii bus: probed
[    1.062578] ------------- phy_id = 0x3625e62
[    1.067621] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.076150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.082874] ehci-pci: EHCI PCI platform driver
[    1.090141] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.097011] usbcore: registered new interface driver usb-storage
[    1.103843] mousedev: PS/2 mouse device common for all mice
[    1.109953] i2c /dev entries driver
[    1.116867] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.122349] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.128253] Xilinx Zynq CpuIdle Driver started
[    1.133100] sdhci: Secure Digital Host Controller Interface driver
[    1.139239] sdhci: Copyright(c) Pierre Ossman
[    1.143535] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.150398] mmc0: no vqmmc regulator found
[    1.154415] mmc0: no vmmc regulator found
[    1.196855] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205525] usbcore: registered new interface driver usbhid
[    1.211033] usbhid: USB HID core driver
[    1.215744] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222038] nand: Micron MT29F2G08ABAEAWP
[    1.226007] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231940] Bad block table found at page 131008, version 0x01
[    1.238165] Bad block table found at page 130944, version 0x01
[    1.244157] nand_read_bbt: bad block at 0x0000099a0000
[    1.249297] 3 ofpart partitions found on MTD device pl353-nand
[    1.255040] Creating 3 MTD partitions on "pl353-nand":
[    1.260187] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.268196] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.275486] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.284191] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[    1.290777] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.296056] TCP: cubic registered
[    1.299354] NET: Registered protocol family 17
[    1.303983] Registering SWP/SWPB emulation handler
[    1.309880] regulator-dummy: disabling
[    1.314158] UBI: attaching mtd1 to ubi0
[    1.841453] UBI: scanning is finished
[    1.853081] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.860159] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.866921] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.873586] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.880463] UBI: good PEBs: 1151, bad PEBs: 1, corrupted PEBs: 0
[    1.886432] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.893564] UBI: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 702528904
[    1.902507] UBI: available PEBs: 0, total reserved PEBs: 1151, PEBs reserved for bad PEB handling: 39
[    1.911723] UBI: background thread "ubi_bgt0d" started, PID 1085
[    1.911728] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.915681] ALSA device list:
[    1.915685]   No soundcards found.
[    1.932019] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[    1.961054] UBIFS: recovery needed
[    2.074180] UBIFS: recovery completed
[    2.077859] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.083779] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.092911] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.102797] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.107837] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3F8BCD8F-4BBE-4B19-8034-385F88941BDB, small LPT model
[    2.119118] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.125827] devtmpfs: mounted
[    2.128961] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[    2.963842] random: dd urandom read with 0 bits of entropy available
[    3.386869]
[    3.386869] bcm54xx_config_init
[    4.446887]
[    4.446887] bcm54xx_config_init
[    8.447703] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    8.453805] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   22.605304] In axi fpga driver!
[   22.608390] request_mem_region OK!
[   22.611759] AXI fpga dev virtual address is 0xdf9fc000
[   22.616887] *base_vir_addr = 0xc725
[   22.632198] In fpga mem driver!
[   22.635267] request_mem_region OK!
[   22.638865] fpga mem virtual address is 0xe2000000
[   23.436172]
[   23.436172] bcm54xx_config_init
[   24.536041]
[   24.536041] bcm54xx_config_init
[   28.536407] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   28.542510] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507424768
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6faa000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc725
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5da3000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=8000c725
main.c:14064: miner ID : 8168c5281540881c
main.c:14097: Miner Type = T9+
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 18
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x07003f0e
driver-bitmain.c:1907: Find hashboard on Chain[1]
driver-bitmain.c:1907: Find hashboard on Chain[2]
driver-bitmain.c:1907: Find hashboard on Chain[3]
driver-bitmain.c:1907: Find hashboard on Chain[8]
driver-bitmain.c:1907: Find hashboard on Chain[9]
driver-bitmain.c:1907: Find hashboard on Chain[10]
driver-bitmain.c:1907: Find hashboard on Chain[11]
driver-bitmain.c:1907: Find hashboard on Chain[12]
driver-bitmain.c:1907: Find hashboard on Chain[13]
main.c:2126: chain[1] PIC jump to app
main.c:2134: Check chain[1] PIC fw version=0x90
main.c:2126: chain[2] PIC jump to app
main.c:2134: Check chain[2] PIC fw version=0x90
main.c:2126: chain[3] PIC jump to app
main.c:2134: Check chain[3] PIC fw version=0x90
main.c:8651: Chain[1] read_freq_badcores : 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
main.c:8665: chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9148: chain[1] has no freq in PIC! Will use default freq=550 and jump over...
main.c:8651: Chain[2] read_freq_badcores : 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
main.c:8665: chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9148: chain[2] has no freq in PIC! Will use default freq=550 and jump over...
main.c:8651: Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x01 0x10 0x11 0x11 0x61 0x80 0x03 0x21 0x20 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x11 0x50 0x41 0x30 0x18 0x41 0x11 0x12 0x11 0x40 0x57 0x00 0xff 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x41 0x12 0x82 0x11 0x43 0x40 0xa1 0x03 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
main.c:8665: chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[3] has freq in PIC and will jump over...
main.c:9026: Chain[3] has core num in PIC
main.c:9036: Chain[3] ASIC[1] has core num=1
main.c:9036: Chain[3] ASIC[2] has core num=1
main.c:9036: Chain[3] ASIC[4] has core num=1
main.c:9036: Chain[3] ASIC[5] has core num=1
main.c:9036: Chain[3] ASIC[6] has core num=1
main.c:9036: Chain[3] ASIC[7] has core num=1
main.c:9036: Chain[3] ASIC[8] has core num=6
main.c:9036: Chain[3] ASIC[9] has core num=1
main.c:9036: Chain[3] ASIC[10] has core num=8
main.c:9036: Chain[3] ASIC[13] has core num=3
main.c:9036: Chain[3] ASIC[14] has core num=2
main.c:9036: Chain[3] ASIC[15] has core num=1
main.c:9036: Chain[3] ASIC[16] has core num=2
main.c:9148: chain[8] has no freq in PIC! Will use default freq=550 and jump over...
main.c:9148: chain[9] has no freq in PIC! Will use default freq=550 and jump over...
main.c:9148: chain[10] has no freq in PIC! Will use default freq=550 and jump over...
main.c:9148: chain[11] has no freq in PIC! Will use default freq=550 and jump over...
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[12] has freq in PIC and will jump over...
main.c:9026: Chain[12] has core num in PIC
main.c:9036: Chain[12] ASIC[0] has core num=1
main.c:9036: Chain[12] ASIC[1] has core num=1
main.c:9036: Chain[12] ASIC[2] has core num=5
main.c:9036: Chain[12] ASIC[4] has core num=4
main.c:9036: Chain[12] ASIC[5] has core num=1
main.c:9036: Chain[12] ASIC[6] has core num=3
main.c:9036: Chain[12] ASIC[8] has core num=1
main.c:9036: Chain[12] ASIC[9] has core num=8
main.c:9036: Chain[12] ASIC[10] has core num=4
main.c:9036: Chain[12] ASIC[11] has core num=1
main.c:9036: Chain[12] ASIC[12] has core num=1
main.c:9036: Chain[12] ASIC[13] has core num=1
main.c:9036: Chain[12] ASIC[14] has core num=1
main.c:9036: Chain[12] ASIC[15] has core num=2
main.c:9036: Chain[12] ASIC[16] has core num=1
main.c:9036: Chain[12] ASIC[17] has core num=1
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[13] has freq in PIC and will jump over...
main.c:9026: Chain[13] has core num in PIC
main.c:9036: Chain[13] ASIC[0] has core num=4
main.c:9036: Chain[13] ASIC[1] has core num=1
main.c:9036: Chain[13] ASIC[2] has core num=1
main.c:9036: Chain[13] ASIC[3] has core num=2
main.c:9036: Chain[13] ASIC[4] has core num=8
main.c:9036: Chain[13] ASIC[5] has core num=2
main.c:9036: Chain[13] ASIC[6] has core num=1
main.c:9036: Chain[13] ASIC[7] has core num=1
main.c:9036: Chain[13] ASIC[8] has core num=4
main.c:9036: Chain[13] ASIC[9] has core num=3
main.c:9036: Chain[13] ASIC[10] has core num=4
main.c:9036: Chain[13] ASIC[12] has core num=10
main.c:9036: Chain[13] ASIC[13] has core num=1
main.c:9036: Chain[13] ASIC[15] has core num=3
main.c:9036: Chain[13] ASIC[16] has core num=1
main.c:9036: Chain[13] ASIC[17] has core num=1
main.c:9183: get PIC voltage=28 on chain[1], value=820
main.c:9183: get PIC voltage=28 on chain[2], value=820
main.c:9183: get PIC voltage=33 on chain[3], value=810
main.c:9183: get PIC voltage=28 on chain[8], value=820
main.c:9183: get PIC voltage=28 on chain[9], value=820
main.c:9183: get PIC voltage=28 on chain[10], value=820
main.c:9183: get PIC voltage=28 on chain[11], value=820
main.c:9183: get PIC voltage=33 on chain[12], value=810
main.c:9183: get PIC voltage=33 on chain[13], value=810
main.c:9349: chain[8] temp offset record: 1,5,0,0,0,0,33,28
main.c:9366: chain[8] temp chip I2C addr=0x98
main.c:9349: chain[10] temp offset record: 1,4,0,0,0,0,33,28
main.c:9366: chain[10] temp chip I2C addr=0x98
main.c:9349: chain[12] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
main.c:9366: chain[12] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 9
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 9, total chain num = 9
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1844 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12363:bitmain_c5_init: Miner Type = T9+
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:56:54 CST 2019 type: Antminer T9+
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 8168c5281540881c
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=4560
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=4560
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=4560
driver-btm-c5.c:1664:jump_to_app_CheckAndRestorePIC_T9_18: chain[1] PIC jump to app
driver-btm-c5.c:1669:jump_to_app_CheckAndRestorePIC_T9_18: Check chain[1] PIC fw version=0x90
driver-btm-c5.c:12666:bitmain_c5_init: Chain[1] read_freq_badcores : 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
driver-btm-c5.c:12680:bitmain_c5_init: chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:12849:bitmain_c5_init: Chain[J2] test patten OK temp=-1
driver-btm-c5.c:1664:jump_to_app_CheckAndRestorePIC_T9_18: chain[2] PIC jump to app
driver-btm-c5.c:1669:jump_to_app_CheckAndRestorePIC_T9_18: Check chain[2] PIC fw version=0x90
driver-btm-c5.c:12666:bitmain_c5_init: Chain[2] read_freq_badcores : 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
driver-btm-c5.c:12680:bitmain_c5_init: chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:12849:bitmain_c5_init: Chain[J3] test patten OK temp=-1
driver-btm-c5.c:1664:jump_to_app_CheckAndRestorePIC_T9_18: chain[3] PIC jump to app
driver-btm-c5.c:1669:jump_to_app_CheckAndRestorePIC_T9_18: Check chain[3] PIC fw version=0x90
driver-btm-c5.c:12666:bitmain_c5_init: Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x01 0x10 0x11 0x11 0x61 0x80 0x03 0x21 0x20 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x11 0x50 0x41 0x30 0x18 0x41 0x11 0x12 0x11 0x40 0x57 0x00 0xff 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x40 0x41 0x12 0x82 0x11 0x43 0x40 0xa1 0x03 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
driver-btm-c5.c:12680:bitmain_c5_init: chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:12825:bitmain_c5_init: Chain[J4] has backup chain_voltage=870
driver-btm-c5.c:12835:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12841:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12849:bitmain_c5_init: Chain[J4] test patten OK temp=-1
driver-btm-c5.c:12849:bitmain_c5_init: Chain[J9] test patten OK temp=-1
driver-btm-c5.c:12849:bitmain_c5_init: Chain[J10] test patten OK temp=-1
driver-btm-c5.c:12849:bitmain_c5_init: Chain[J11] test patten OK temp=-1
driver-btm-c5.c:12849:bitmain_c5_init: Chain[J12] test patten OK temp=-1
driver-btm-c5.c:12825:bitmain_c5_init: Chain[J13] has backup chain_voltage=870
driver-btm-c5.c:12835:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12841:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12849:bitmain_c5_init: Chain[J13] test patten OK temp=-1
driver-btm-c5.c:12825:bitmain_c5_init: Chain[J14] has backup chain_voltage=870
driver-btm-c5.c:12835:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12841:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12849:bitmain_c5_init: Chain[J14] test patten OK temp=-1
driver-btm-c5.c:12237:init_exist_chain_table: total_exist_chain_num = 9
driver-btm-c5.c:13278:bitmain_c5_init: Chain[J2] will use voltage=890 [7] to open core
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 7 seccessful
driver-btm-c5.c:13278:bitmain_c5_init: Chain[J3] will use voltage=890 [7] to open core
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 7 seccessful
driver-btm-c5.c:13278:bitmain_c5_init: Chain[J4] will use voltage=890 [7] to open core
driver-btm-c5.c:2152:set_Voltage_S9_plus_plus_BM1387_54: set voltage 7 seccessful
driver-btm-c5.c:13278:bitmain_c5_init: Chain[J9] will use voltage=890 [7] to open core
driver-btm-c5.c:13278:bitmain_c5_init: Chain[J10] will use voltage=890 [7] to open core
driver-btm-c5.c:13278:bitmain_c5_init: Chain[J11] will use voltage=890 [7] to open core
driver-btm-c5.c:13278:bitmain_c5_init: Chain[J12] will use voltage=890 [7] to open core
driver-btm-c5.c:13278:bitmain_c5_init: Chain[J13] will use voltage=890 [7] to open core
driver-btm-c5.c:13278:bitmain_c5_init: Chain[J14] will use voltage=890 [7] to open core
btm_adjust_hash.c:922:adjust_vol: Chain[J2] original vol value=880 adjusted vol value:780
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J2] orignal chain_voltage_pic=28 value=820
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J2] original chain_voltage_value=880 adjusted chain_voltage_value:780, value=820
btm_adjust_hash.c:922:adjust_vol: Chain[J3] original vol value=880 adjusted vol value:780
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J3] orignal chain_voltage_pic=28 value=820
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J3] original chain_voltage_value=880 adjusted chain_voltage_value:780, value=820
btm_adjust_hash.c:922:adjust_vol: Chain[J4] original vol value=870 adjusted vol value:770
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J4] orignal chain_voltage_pic=33 value=810
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J4] original chain_voltage_value=870 adjusted chain_voltage_value:770, value=810
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J4] will use backup chain_voltage_pic=770 [65]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J4] get working chain_voltage_pic=65
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[00] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[01] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[02] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[03] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[04] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[05] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[06] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[07] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[08] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[09] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[10] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[11] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[12] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[13] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[14] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[15] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[16] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J4] Aisc[17] original freq=581 adjusted freq:487
btm_adjust_hash.c:922:adjust_vol: Chain[J9] original vol value=880 adjusted vol value:780
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J9] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J9] original chain_voltage_value=880 adjusted chain_voltage_value:780, value=890
btm_adjust_hash.c:922:adjust_vol: Chain[J10] original vol value=880 adjusted vol value:780
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J10] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J10] original chain_voltage_value=880 adjusted chain_voltage_value:780, value=890
btm_adjust_hash.c:922:adjust_vol: Chain[J11] original vol value=880 adjusted vol value:780
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J11] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J11] original chain_voltage_value=880 adjusted chain_voltage_value:780, value=890
btm_adjust_hash.c:922:adjust_vol: Chain[J12] original vol value=880 adjusted vol value:780
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J12] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J12] original chain_voltage_value=880 adjusted chain_voltage_value:780, value=890
btm_adjust_hash.c:922:adjust_vol: Chain[J13] original vol value=870 adjusted vol value:770
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J13] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J13] original chain_voltage_value=870 adjusted chain_voltage_value:770, value=890
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J13] will use backup chain_voltage_pic=770 [65]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J13] get working chain_voltage_pic=65
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[00] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[01] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[02] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[03] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[04] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[05] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[06] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[07] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[08] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[09] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[10] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[11] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[12] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[13] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[14] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[15] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[16] original freq=581 adjusted freq:487
btm_adjust_hash.c:791:set_asic_freq: Chain[J13] Aisc[17] original freq=581 adjusted freq:487
btm_adjust_hash.c:922:adjust_vol: Chain[J14] original vol value=870 adjusted vol value:770
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J14] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J14] original chain_voltage_value=870 adjusted chain_voltage_value:770, value=890
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J14] will use backup chain_voltage_pic=770 [65]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J14] get working chain_voltage_pic=65
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[00] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[01] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[02] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[03] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[04] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[05] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[06] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[07] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[08] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[09] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[10] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[11] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[12] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[13] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[14] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[15] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[16] original freq=587 adjusted freq:493
btm_adjust_hash.c:791:set_asic_freq: Chain[J14] Aisc[17] original freq=587 adjusted freq:493
newbie
Activity: 4
Merit: 0
August 13, 2021, 01:54:06 PM
#1
I have 2 Antminer T9+'s and both have a similar issue though they started at different time. 1st issue started on T9+ #1 when I moved to a new location. Issue 2 started on T9+ #2 after upgrading the firmware. For both ASICs either the J4 chains (T9+ #1) or the J2 chains (T9+ #2) have 0 hashrate in the "GH/S(RT)" column. The chains associated with either J4 or J2 still display 18 ASICs, a temperature, and the ASIC status of  oooooooo oooooooo oo. The issue is the hashrate column displays 0.00 for all 3 chains for the J connection.

Troubleshooting:
- Swapped PSUs with known good units: no change
- Different Data Cable: no change
- Different known good outlet (used for GPU rigs using 2.1 kW on 240VAC): no change
- Upgraded firmware to latest firmware from BITMAIN: looked like a fix for T9+ #1. Stable for ~6 hours, so I updated the firmware on T9+ #2 as well before I went to sleep. When I woke up, T9+ #1 had the issue on J4 again and T9+ #2.
- Swapped potentially bad hashboards to known good J connection on control board, and known good hashboard to potentially bad J connection: Issue followed the J connections, not the hashboards. Meaning the unknown hashboard worked fine on a known good J connection, while a known good hashboard did not work when swapped to J4 on T9+ #1.
- Swapped connection cables from good J connection/good hashboard to J connection/hashboard with issues: known good cable did not work on bad J connection/hashboard, unknown cable worked on known good J connection/hashboard
- Attempted to re-flash to a different firmware or downgrade to a previous version from BITMAIN via web interface: Control boards wont allow the firmware from non BITMAIN sources since it can't verify the signatures. I also can't find a previous version to downgrade to on BITMAINS website.

I'll upload kernel logs as soon as I get back to the rigs; I'm just away from them right now and wanted to at least get an initial post up.
- since the account is new, it's making me wait to post again. I'll get it in ASAP.

Thanks everyone in advance for the help!
Jump to: