Topic: t9+ stop hashing after 2 minutes (Read 238 times)

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000315] ps7-ttc #0 at df804000, irq=43
[    0.000628] Console: colour dummy device 80x30
[    0.000660] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040209] pid_max: default: 32768 minimum: 301
[    0.040434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040454] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042648] CPU: Testing write buffer coherency: ok
[    0.042996] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043055] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043276] L310 cache controller enabled
[    0.043295] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121040] CPU1: Booted secondary processor
[    0.210230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210364] Brought up 2 CPUs
[    0.210384] SMP: Total of 2 processors activated.
[    0.210392] CPU: All CPU(s) started in SVC mode.
[    0.211065] devtmpfs: initialized
[    0.213509] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214757] regulator-dummy: no parameters
[    0.223769] NET: Registered protocol family 16
[    0.226035] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228356] cpuidle: using governor ladder
[    0.228370] cpuidle: using governor menu
[    0.235892] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237412] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237425] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237546] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259572] bio: create slab at 0
[    0.261283] vgaarb: loaded
[    0.262032] SCSI subsystem initialized
[    0.262905] usbcore: registered new interface driver usbfs
[    0.263083] usbcore: registered new interface driver hub
[    0.263316] usbcore: registered new device driver usb
[    0.263847] media: Linux media interface: v0.10
[    0.264005] Linux video capture interface: v2.00
[    0.264249] pps_core: LinuxPPS API ver. 1 registered
[    0.264261] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[    0.264386] PTP clock support registered
[    0.264754] EDAC MC: Ver: 3.0.0
[    0.265822] Advanced Linux Sound Architecture Driver Initialized.
[    0.268852] DMA-API: preallocated 4096 debug entries
[    0.268868] DMA-API: debugging enabled by kernel config
[    0.268955] Switched to clocksource arm_global_timer
[    0.290372] NET: Registered protocol family 2
[    0.291045] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.291106] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.291191] TCP: Hash tables configured (established 4096 bind 4096)
[    0.291245] TCP: reno registered
[    0.291263] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.291299] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291554] NET: Registered protocol family 1
[    0.291930] RPC: Registered named UNIX socket transport module.
[    0.291943] RPC: Registered udp transport module.
[    0.291951] RPC: Registered tcp transport module.
[    0.291959] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.291972] PCI: CLS 0 bytes, default 64
[    0.292430] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294522] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.296703] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.296899] msgmni has been set to 967
[    0.297700] io scheduler noop registered
[    0.297713] io scheduler deadline registered
[    0.297752] io scheduler cfq registered (default)
[    0.312332] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.312353] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.436862] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.004773] console [ttyPS0] enabled
[    1.009099] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.016743] [drm] Initialized drm 1.1.0 20060810
[    1.033964] brd: module loaded
[    1.043416] loop: module loaded
[    1.053062] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.058814] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.066727] libphy: XEMACPS mii bus: probed
[    1.071128] ------------- phy_id = 0x3625e62
[    1.075869] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.084755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.091413] ehci-pci: EHCI PCI platform driver
[    1.098637] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.105719] usbcore: registered new interface driver usb-storage
[    1.112632] mousedev: PS/2 mouse device common for all mice
[    1.118740] i2c /dev entries driver
[    1.125690] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.131262] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.137152] Xilinx Zynq CpuIdle Driver started
[    1.142025] sdhci: Secure Digital Host Controller Interface driver
[    1.148122] sdhci: Copyright(c) Pierre Ossman
[    1.152532] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.159291] mmc0: no vqmmc regulator found
[    1.163307] mmc0: no vmmc regulator found
[    1.198991] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.207695] usbcore: registered new interface driver usbhid
[    1.213213] usbhid: USB HID core driver
[    1.217918] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.224210] nand: Micron MT29F2G08ABAEAWP
[    1.228181] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.234129] Bad block table found at page 131008, version 0x01
[    1.240367] Bad block table found at page 130944, version 0x01
[    1.246339] nand_read_bbt: bad block at 0x000000140000
[    1.251493] 3 ofpart partitions found on MTD device pl353-nand
[    1.257240] Creating 3 MTD partitions on "pl353-nand":
[    1.262392] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.270456] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.277752] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.286790] TCP: cubic registered
[    1.290051] NET: Registered protocol family 17
[    1.294711] Registering SWP/SWPB emulation handler
[    1.300668] regulator-dummy: disabling
[    1.305003] UBI: attaching mtd1 to ubi0
[    1.829747] UBI: scanning is finished
[    1.841440] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.848497] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.855293] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.861969] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.868807] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.874818] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.881928] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1785240847
[    1.890958] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.900176] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.900181] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.904231] ALSA device list:
[    1.904235]   No soundcards found.
[    1.920642] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.982605] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.988533] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.997671] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.007560] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.012597] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B89507E3-1A5F-40A2-9F52-C7513B9EEBEC, small LPT model
[    2.024125] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.030875] devtmpfs: mounted
[    2.033985] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.881648] random: dd urandom read with 0 bits of entropy available
[    3.269018]
[    3.269018] bcm54xx_config_init
[    3.889003]
[    3.889003] bcm54xx_config_init
[    6.889820] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    6.895911] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   19.472730] In axi fpga driver!
[   19.475799] request_mem_region OK!
[   19.479225] AXI fpga dev virtual address is 0xdf9fc000
[   19.484295] *base_vir_addr = 0x3c510
[   19.499857] In fpga mem driver!
[   19.502924] request_mem_region OK!
[   19.506487] fpga mem virtual address is 0xe2000000
[   20.368972]
[   20.368972] bcm54xx_config_init
[   21.008991]
[   21.008991] bcm54xx_config_init
[   24.009814] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   24.015843] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  511.345047] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = T9+
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
chain[1] PIC need restore ...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
After restore: chain[1] PIC fw version=0x90
chain[1] PIC need restore ...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
After restore: chain[1] PIC fw version=0x90
Chain[J2] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Fix freq=550 Chain[1] voltage_pic=7 value=890
Fix freq=550 Chain[8] voltage_pic=7 value=890
Fix freq=550 Chain[9] voltage_pic=7 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J2] has 18 asic
Chain[J9] has 18 asic
Chain[J10] has 18 asic
Chain[J2] has no freq in PIC, set default freq=550M
Chain[J2] has no core num in PIC
Chain[J9] has no freq in PIC, set default freq=550M
Chain[J9] has no core num in PIC
Chain[J10] has no freq in PIC, set default freq=550M
Chain[J10] has no core num in PIC

Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550
Chain:1 max freq=550
Chain:1 min freq=550

read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550
Chain:8 max freq=550
Chain:8 min freq=550

read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550
Chain:9 max freq=550
Chain:9 min freq=550

max freq = 550
set baud=2
Chain[J9] PIC temp offset=1,0,0,0,0,0,35,28
Chain[J9] chip[0] use PIC middle temp offset=0 typeID=41
Warning: Chain[J9] has no temp offset in PIC! will fix it
New offset Chain[8] chip[0] local:41 remote:38 offset:34
Chain[J9] chip[0] get middle temp offset=34 typeID=41
New offset Chain[8] chip[32] local:-61 remote:3 offset:-42
Chain[J9] chip[32] get middle temp offset=-42 typeID=03
open core on chain[1] [8] [9]...
set voltage=890 on chain[1], the real voltage=890
Chain[J2] set working voltage=890 [7]
setStartTimePoint total_tv_start_sys=130 total_tv_end_sys=131
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[1]: (asic index start from 1-18)

get RT hashrate from Chain[8]: (asic index start from 1-18)

get RT hashrate from Chain[9]: (asic index start from 1-18)
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[8]
Chain[8] Chip[1] TempTypeID=41 middle offset=34
read failed, old value: Chain[8] Chip[1] local Temp=64
read failed on Chain[8] Chip[1] middle Temp old value:80
Chain[8] Chip[9] TempTypeID=03 middle offset=-42
read failed, old value: Chain[8] Chip[9] local Temp=0
read failed on Chain[8] Chip[9] middle Temp old value:0
Done read temp on Chain[8]
set FAN speed according to: temp_highest=80 temp_top1[PWM_T]=80 temp_top1[TEMP_POS_LOCAL]=64 temp_change=1 fix_fan_steps=-40
FAN PWM: 0
read_temp_func Done!
CRC error counter=5