Are you using windows 7 ?
Dont forget swith in wattman to compute mode and fast timings to mt1 or mt2
Latest trm doing with rx470 4g 14mhs on RVN and 60-61 on ERGO. WIN10 x64
Topic: TeamRedMiner VERY LOW Mh/s on RX580 8GB (Read 144 times)
Just install hiveOS instead you will get 30MH easier on your rx580 graphic cards, I prefer hiveOS due to a this driver related issues the hiveOS use the mist stable driver for each cards either Nvidia or AMD out of the box
https://rvn.2miners.com/help
https://github.com/todxx/teamredminer/releases
Download the miner again, run it with the recommended settings.
What operating system are you using? I hope not windows 7, 8 or 11?
You need windows 10 and any video card test.
Quote
teamredminer.exe -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u YOUR_WALLET_ADDRESS.RIG_ID -p x
pause
Remove --enable_computepause
https://github.com/todxx/teamredminer/releases
Download the miner again, run it with the recommended settings.
What operating system are you using? I hope not windows 7, 8 or 11?
You need windows 10 and any video card test.
Maybe the gpu needs to be cleaned.
Hi,
I'm new to mining and thought I'd give it a go.
I have a RX580 8GB, so found TeamRed v0.9.1 to be the best miner, so installed this and read I should be getting around 14MH/s, but instead I'm getting 1.571Mh/s and sometimes peaks at 2.3Mh/s
kawpow: 2.188Mh/s, avg 830.6kh/s
My CPU is getting hammered and the GPU spikes from 1% to 60% every now and then.
The batch file command I'm using is (with the correct wallet address in there of course)
teamredminer.exe -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u wallet-address.worker -p x --enable_compute
I've updated to the latest AMD drivers, gone into advanced settings and enable compute over gaming and still getting very low MH/s
Is this to be expected or am I doing something wrong with the batch command file to try and mine raven coins?
Thanks for any input you may have to help me with this.
Regards, Tal.
I'm new to mining and thought I'd give it a go.
I have a RX580 8GB, so found TeamRed v0.9.1 to be the best miner, so installed this and read I should be getting around 14MH/s, but instead I'm getting 1.571Mh/s and sometimes peaks at 2.3Mh/s
kawpow: 2.188Mh/s, avg 830.6kh/s
My CPU is getting hammered and the GPU spikes from 1% to 60% every now and then.
The batch file command I'm using is (with the correct wallet address in there of course)
teamredminer.exe -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u wallet-address.worker -p x --enable_compute
I've updated to the latest AMD drivers, gone into advanced settings and enable compute over gaming and still getting very low MH/s
Is this to be expected or am I doing something wrong with the batch command file to try and mine raven coins?
Thanks for any input you may have to help me with this.
Regards, Tal.
Jump to: