Topic: Technobit Avalon Gen2 Power ?? (Read 825 times)
ok
It is all weird i connected 5v rail and now my fan works .
All the chips have 3.29v supply on one of the pins.
And next to the Motorola micro controller i am geting twice 12.12v psu voltage and 8.6 and 8.9
And i ship it over your site , and i dont have to send the cooler just the pcb to save on shipping.
All the chips have 3.29v supply on one of the pins.
And next to the Motorola micro controller i am geting twice 12.12v psu voltage and 8.6 and 8.9
And i ship it over your site , and i dont have to send the cooler just the pcb to save on shipping.
try to remove the Diode like part on the power connector, or just send it for RMA
http://s28.postimg.org/z09g8zf49/aaa.jpg
And i have red and green led on no flashing , the 12v rail is active i did probe with multimeter on the board and i get 12 v on some areas but the fan conector i am geting 0v.
and when i connect the 12v and ted power on i get 0.05A standby and does not go up wen i star the miner
And i have red and green led on no flashing , the 12v rail is active i did probe with multimeter on the board and i get 12 v on some areas but the fan conector i am geting 0v.
and when i connect the 12v and ted power on i get 0.05A standby and does not go up wen i star the miner
That's seem normal message. You are not using xxx as password right?
Please post the HEXMINER screen shot.
Please post the HEXMINER screen shot.
ok i did that it power on and everything but i get eror that authorization not ok and i did try more pools .
http://s27.postimg.org/drufssiu7/asadaada.jpg
what now
And thanks for all your help
http://s27.postimg.org/drufssiu7/asadaada.jpg
what now
And thanks for all your help
Set pool to : http://localhost:8332
Set frequency to : 1500
Set voltage to : 1100
uncheck: test only
But please consider to use TPLINK TL-MR3020 as host. Cheap & small power consumption.
Set frequency to : 1500
Set voltage to : 1100
uncheck: test only
But please consider to use TPLINK TL-MR3020 as host. Cheap & small power consumption.
TXN
it does seams to be alive but now i am detecting it but not hashing look at print scr if you have time
http://s28.postimg.org/nfr7k0tvt/bjelo.jpg
http://s23.postimg.org/p3fuenafb/crno.jpg
it does seams to be alive but now i am detecting it but not hashing look at print scr if you have time
http://s28.postimg.org/nfr7k0tvt/bjelo.jpg
http://s23.postimg.org/p3fuenafb/crno.jpg
Helo Wourld
I need help i have this board
http://technobit.eu/index.php?id_category=12&controller=category&id_lang=1
Do i need to have 5 v and 12v conectred or only 12v and usb cable
I am not runing in from a pc but from a Hp mini laptop to save power only 30W and will power the miner from a old laptop power suply 12W@10A
You need only 12 v power and USB for data.I need help i have this board
http://technobit.eu/index.php?id_category=12&controller=category&id_lang=1
Do i need to have 5 v and 12v conectred or only 12v and usb cable
I am not runing in from a pc but from a Hp mini laptop to save power only 30W and will power the miner from a old laptop power suply 12W@10A
12 v is on molex or wire terminal.
10 A is on the edge
Helo Wourld
I need help i have this board
http://technobit.eu/index.php?id_category=12&controller=category&id_lang=1
Do i need to have 5 v and 12v conectred or only 12v and usb cable
I am not runing in from a pc but from a Hp mini laptop to save power only 30W and will power the miner from a old laptop power suply 12W@10A
I need help i have this board
http://technobit.eu/index.php?id_category=12&controller=category&id_lang=1
Do i need to have 5 v and 12v conectred or only 12v and usb cable
I am not runing in from a pc but from a Hp mini laptop to save power only 30W and will power the miner from a old laptop power suply 12W@10A
Jump to: