Technobit HEX16A2 won't start mining

Soiled

newbie

Activity: 2

Merit: 0

I borrow this topic.

As a newbie I have question about Hexminer (I have Technobit HEX16A) . How I can mine different coins using hexminer? Example asiccoin in pool http://www.coinmine.pl/asc/ or is it possible at all.
I can mine btc in -o stratum.mining.eligius.st -p 3334 but you don't have to register there and make workers so what I need to write in stratum converter? If I use example -o stratum+tcp://asc.coinmine.pl:6110 there comes extra :3333 behind the address when running the converter.
Thank you for your help!

stiffla

member

Activity: 77

Merit: 10

Quote from: TrytoHex on December 22, 2013, 03:03:52 AM

I had the same problem with win7. Could't get it to work. Now I'm using Pi with minepeon and patched cgminer.
When using Raspberry, did you patch your cgminer?

yes i patched the cgminer and also tried with cgminer 3.8.1 and v3.8.5 (which failed compiling)
I am using a pi with debian and a notebook with ubuntu for testing at the moment

The hex board is just blinking!

TrytoHex

member

Activity: 86

Merit: 10

I had the same problem with win7. Could't get it to work. Now I'm using Pi with minepeon and patched cgminer.
When using Raspberry, did you patch your cgminer?

stiffla

member

Activity: 77

Merit: 10

Hi,

I finally received my board from Technobit.

Problem is, that I am not able to get the board up running neither on raspberry nor on Win7 with the HEX Miner software.

I followed the instructions in the official topic https://bitcointalk.org/index.php?topic=323727.200 but it is still not working.

The only thing that is counting up is LW in cgminer and Work age in HEX Miner.

Anyone had the same problems?

@marto74 if you read this, maybe you could help me please

best regards

Topic: Technobit HEX16A2 won't start mining (Read 758 times)