Bitcoin Forum>Bitcoin>Mining>Hardware
Author

Topic: This is what we need to link all this FPGA Boards :) (Read 2525 times)

aTg
legendary
Activity: 1358
Merit: 1000
This is what we need to link all this FPGA Boards :)
May 05, 2012, 11:54:27 AM
#15
Quote from: seriouscoin on May 04, 2012, 03:14:12 PM
Quote from: aTg on May 04, 2012, 02:42:19 PM
Quote from: antirack on May 03, 2012, 07:48:30 PM
There is also this, but I couldn't get hold of it so far to test it. But the form factor sucks anyway in my opinion.

http://www.geekalerts.com/megahub-36-port-powered-usb-hub/


I have this and is the most practical and inexpensive.

have you been running any FPGAs with it?


if, for now just one.
seriouscoin
hero member
Activity: 658
Merit: 500
Re: This is what we need to link all this FPGA Boards :)
May 04, 2012, 03:14:12 PM
#14
Quote from: aTg on May 04, 2012, 02:42:19 PM
Quote from: antirack on May 03, 2012, 07:48:30 PM
There is also this, but I couldn't get hold of it so far to test it. But the form factor sucks anyway in my opinion.

http://www.geekalerts.com/megahub-36-port-powered-usb-hub/


I have this and is the most practical and inexpensive.

have you been running any FPGAs with it?
aTg
legendary
Activity: 1358
Merit: 1000
Re: This is what we need to link all this FPGA Boards :)
May 04, 2012, 02:42:19 PM
#13
Quote from: antirack on May 03, 2012, 07:48:30 PM
There is also this, but I couldn't get hold of it so far to test it. But the form factor sucks anyway in my opinion.

http://www.geekalerts.com/megahub-36-port-powered-usb-hub/


I have this and is the most practical and inexpensive.
ngzhang
hero member
Activity: 592
Merit: 501
We will stand and fight.
Re: This is what we need to link all this FPGA Boards :)
May 04, 2012, 02:35:06 PM
#12
Quote from: rjk on May 04, 2012, 02:12:41 PM
Quote from: ngzhang on May 04, 2012, 01:51:02 PM
拙计
What?

It looks like you wrote "twit" with some funny characters. Grin

good, you get the point.  Grin
rjk
sr. member
Activity: 448
Merit: 250
1ngldh
Re: This is what we need to link all this FPGA Boards :)
May 04, 2012, 02:12:41 PM
#11
Quote from: ngzhang on May 04, 2012, 01:51:02 PM
拙计
What?

It looks like you wrote "twit" with some funny characters. Grin
ngzhang
hero member
Activity: 592
Merit: 501
We will stand and fight.
Re: This is what we need to link all this FPGA Boards :)
May 04, 2012, 01:51:02 PM
#10
拙计
nathanghart
full member
Activity: 195
Merit: 100
Re: This is what we need to link all this FPGA Boards :)
May 04, 2012, 10:25:23 AM
#9
Quote from: TheSeven on May 03, 2012, 04:39:38 PM
I'm tempted to say that someone apparently didn't quite understand the actual problem and the ideal way to solve it here...

Don't be too tempted. Maybe it was designed for QC testing USB sticks... Cheesy
Jaryu
member
Activity: 90
Merit: 10
Re: This is what we need to link all this FPGA Boards :)
May 04, 2012, 10:20:26 AM
#8
Quote from: enmaku on May 03, 2012, 07:33:49 PM
24 ports for $50

Your product is unneeded. Thread over.

it's not my product, I just found it while browsing and wanted to share, you can get 13 port hubs on ebay for 8 bucks.
Unacceptable
legendary
Activity: 2212
Merit: 1001
Re: This is what we need to link all this FPGA Boards :)
May 04, 2012, 01:04:40 AM
#7
Quote from: antirack on May 03, 2012, 07:48:30 PM
There is also this, but I couldn't get hold of it so far to test it. But the form factor sucks anyway in my opinion.

http://www.geekalerts.com/megahub-36-port-powered-usb-hub/


Not to bad,price is ok.But you'll need extra long USB cables Cheesy

http://www.chinavasion.com/usb-accessories/cvtkk147/
Beaflag VonRathburg
sr. member
Activity: 472
Merit: 250
Re: This is what we need to link all this FPGA Boards :)
May 03, 2012, 10:31:23 PM
#6
I noticed that most of the large flat ones are usually just for charging devices or for copying USB drives.

Quote from: antirack on May 03, 2012, 07:48:30 PM
There is also this, but I couldn't get hold of it so far to test it. But the form factor sucks anyway in my opinion.

http://www.geekalerts.com/megahub-36-port-powered-usb-hub/


That's the largest one I've seen that has full functionability.
antirack
hero member
Activity: 489
Merit: 500
Immersionist
Re: This is what we need to link all this FPGA Boards :)
May 03, 2012, 07:48:30 PM
#5
There is also this, but I couldn't get hold of it so far to test it. But the form factor sucks anyway in my opinion.

http://www.geekalerts.com/megahub-36-port-powered-usb-hub/
enmaku
hero member
Activity: 742
Merit: 500
Re: This is what we need to link all this FPGA Boards :)
May 03, 2012, 07:33:49 PM
#4
24 ports for $50

Your product is unneeded. Thread over.
antirack
hero member
Activity: 489
Merit: 500
Immersionist
Re: This is what we need to link all this FPGA Boards :)
May 03, 2012, 07:30:42 PM
#3
Just for your info, here are the prices for this 49 port USB hub (prices US$). I contacted them a few months ago and was a bit shocked when I received their price list. I even had to ask if they are sure the currency is US$.

Quote
Costs for the DS-IP-49 -SYNC (without power supply) is:

Q 1-4: $1425.00
Q 5-10: $1375.00
Q 11-25: $1300.00
Q 26-50: $1200.00

Freight is additional.

So yes, go ahead and order one. I'll stick with my cheapo 10 port hubs for a few dolla ;-)
TheSeven
hero member
Activity: 504
Merit: 500
FPGA Mining LLC
Re: This is what we need to link all this FPGA Boards :)
May 03, 2012, 04:39:38 PM
#2
I'm tempted to say that someone apparently didn't quite understand the actual problem and the ideal way to solve it here...
Jaryu
member
Activity: 90
Merit: 10
Re: This is what we need to link all this FPGA Boards :)
May 03, 2012, 04:23:50 PM
#1


49 Ports for your FPGA enjoyement Price sux but it's a nifty idea.
Bitcoin Forum>Bitcoin>Mining>Hardware
Jump to: