Topic: to crossfire or not to crossfire (Read 1986 times)
Since I use TightVNC I have never had to "dick with monitor settings", on my other rigs I just walk into the room and physically plug a monitor into the card I want to spin up, then go back to my PC and remotely start the mining shortcut (I've been using shortcuts lately instead of batch files), then go back to the rig and swap the monitor to the next card, and so on.
I don't want to use dummy plugs since I lose 3-5 MH/s per dummy plug, so I crossfired a pair of 5770's yesterday. Now, I can access both DEVICE=0 and DEVICE=1 with no monitors attached (TightVNC), and the pair are hashing along at 220 MH/s each.
I don't see any wasted performance ... ?
I don't see any wasted performance ... ?
I run 3x6970 crossfired with no performance issues. Better than dicking with two non-existant monitors.
I don't want to use dummy plugs since I lose 3-5 MH/s per dummy plug, so I crossfired a pair of 5770's yesterday. Now, I can access both DEVICE=0 and DEVICE=1 with no monitors attached (TightVNC), and the pair are hashing along at 220 MH/s each.
I don't see any wasted performance ... ?
I don't see any wasted performance ... ?
Just added a second 5830 to my gaming/miner rig. In CrossFireX running Linuxcoin, 900/300 overclock the primary card has a stable 312 MH/s rate and the secondary card fluctuates from 310 MH/s down to 280 MH/s and back up again. So I see what is meant by losing efficiency. Games nice though.
No doubt, that's working fine for me too. I'm just thinking about trying crossfire to see if I can exceed 614mh/s. I don't think I will but wanted to get opinions.
I'm not sure what you're reading, but everything that I've seen shows crossfire hurts performance. Miners using crossfire are either leaving value on the table, or they're also using their rigs for gaming where crossfire is worthwhile.
Your cards will hash faster isolated.
Sounds good. I've just seen a lot of high performance rigs selling WITH crossfire cables on. (ie looking at the photos)
No doubt, that's working fine for me too. I'm just thinking about trying crossfire to see if I can exceed 614mh/s. I don't think I will but wanted to get opinions.
I'm not sure what you're reading, but everything that I've seen shows crossfire hurts performance. Miners using crossfire are either leaving value on the table, or they're also using their rigs for gaming where crossfire is worthwhile.
Your cards will hash faster isolated.
can you confirm in 11.7 indeed no longer needs dummy plugs?
Worked on all of my multi-gpu rigs. No more hassle with monitor cables and dummies.
I just put a 5th card in my rigs last night with 11.7 and I also did not need the dummy plugs...OC through AOCLBF. I read somewhere that you could not software OC without the dummys but it seems to be working for me.
No doubt, that's working fine for me too. I'm just thinking about trying crossfire to see if I can exceed 614mh/s. I don't think I will but wanted to get opinions.
can you confirm in 11.7 indeed no longer needs dummy plugs?
Worked on all of my multi-gpu rigs. No more hassle with monitor cables and dummies.
I just put a 5th card in my rigs last night with 11.7 and I also did not need the dummy plugs...OC through AOCLBF. I read somewhere that you could not software OC without the dummys but it seems to be working for me.
I see a lot of respectable rigs all using crossfire. I'm currently using 2x5830's right now at 307mh/s a piece. I can't imagine beating that just by using crossfire but wanted to check anyway.
can you confirm in 11.7 indeed no longer needs dummy plugs?
Worked on all of my multi-gpu rigs. No more hassle with monitor cables and dummies.
can you confirm in 11.7 indeed no longer needs dummy plugs?
Don't do crossfire bottlenecks the cards and if you have issues with windows make a vga dummy plug which all you need is a dvi to vga and a couple of resisters to get it working and it makes windows see the card.
http://www.overclock.net/folding-home-guides-tutorials/384733-30-second-dummy-plug.html
http://www.overclock.net/folding-home-guides-tutorials/384733-30-second-dummy-plug.html
Yeah, just found out about that last night. I think CCC 11.7 doesn't need dummies though. May try that. I have a 4870 and 5830 in there now. Eventually I'll get 2x5830's.
Don't do crossfire bottlenecks the cards and if you have issues with windows make a vga dummy plug which all you need is a dvi to vga and a couple of resisters to get it working and it makes windows see the card.
http://www.overclock.net/folding-home-guides-tutorials/384733-30-second-dummy-plug.html
http://www.overclock.net/folding-home-guides-tutorials/384733-30-second-dummy-plug.html
Individually.
Is it better to run two 5830's in crossfire mode or individually?
Jump to: