Topic: To Overclock or just clock - Antminer S1 overclocking safe? (Read 1210 times)
i have a couple running at 375. One has minimal errors (2), the other regularly has them but its less than .10 percent total so I have kept them at 375. . From all accounts 375 should be safe with acceptable errors. . I do run them in a nice chilly data room though with the stock fans.
Has anyone killed their antminer S1 by overclocking?!
I remember one of you posted that it was unlikely we could actually damage the chips because we were not changing voltage regulation.
I overclocked to 375 for a day and only had 6 HW but then the "o" started turning to "x" (although apparent pool speed was unaffected). I'm just wondering how safe the community thinks overclocking this rig is assuming adequate cooling.
Thanks in advance for your input
I remember one of you posted that it was unlikely we could actually damage the chips because we were not changing voltage regulation.
I overclocked to 375 for a day and only had 6 HW but then the "o" started turning to "x" (although apparent pool speed was unaffected). I'm just wondering how safe the community thinks overclocking this rig is assuming adequate cooling.
Thanks in advance for your input
Jump to: