Topic: Too high power consumption (Read 541 times)
Oh so its normal, okay, its stock set i just get them, i will try oc it later, hmm do you guys know if this card have bios switch, i can find switch on it but is not description on it. i dont want mod bios without it, is too scary for me hahah. oh also i have high temp 63C and fan 75% on last card (rx570) was 54C with fan 50%
I believe the default power consumption of rx 580 is slightly higher than rx 570 by about 20w(I might be wrong) but I am sure they where higher, I believe that explains the higher power draw at the wall.
Regards,
BLife
Regards,
BLife
this
http://www.anandtech.com/bench/product/1869?vs=1868
Load Power Consumption - Crysis 3
Total System Power Consumption in Watts (Lower is Better)
rx 570 297 watts
rx 580 324 watts
Load Power Consumption - FurMark
Total System Power Consumption in Watts (Lower is Better)
rx 570 237 watts
rx 580 250 watts
I believe the default power consumption of rx 580 is slightly higher than rx 570 by about 20w(I might be wrong) but I am sure they where higher, I believe that explains the higher power draw at the wall.
Regards,
BLife
Regards,
BLife
Set lower voltages and underclock. Also you can mod bios to be less power intensive.
hello i had before 1x rx570 msi armor in my mining and it take at wall 167W. now i put only 2x powercolor dragon rx 580 4gb and they take from wall 390W (without the rx 570) that is not too high ? I expected consumption ~ 330W
Download saphire trixx n play with the volt to under volt it. It helps to bring down the needed power.
Also read up other topic on bios mod too.
Did you apply and bios mods, undervolts?
Default consumption is of RX 500 series are quite high.
Default consumption is of RX 500 series are quite high.
hello i had before 1x rx570 msi armor in my mining and it take at wall 167W. now i put only 2x powercolor dragon rx 580 4gb and they take from wall 390W (without the rx 570) that is not too high ? I expected consumption ~ 330W
Jump to: