thank you for all the feedback
first we have 220v in europe
thanks for the idea but i can rule that out
for both problems it helped to flash the S17 recovery image, latest version from the Bitmain website
https://file12.bitmain.com/shop-product/firmware/c2c32666-d4ab-49b7-870f-9a31b46074b7/2020/09/27/10/sd_set_default_password_enhanced_0527_S17.zip
Prob 1:
After flashing reset to factory default, then connect the hashboard solved the more "than 0.5v diff" probs.
Then update to latest firmware
Prob 2:
still exists but one of the 3 hashboards is now recognized while the other two still say 0 Asics found
I do not know if this has to do with the flashing it worked afterwards
After this I checked the cables cross all boards with all cables but no positive effect, two hashboards won´t detected.
All boards have the same product id/pcb so any further ideas?
Topic: Two S17 problems 0 Asics & more than 0.5v diff (Read 183 times)
Are you running them at 110v?
Did you directly plug it on the wall outlet or did you use a voltage surge?
Your first logs only lead to power supply issues maybe your house is rated with 110v which is why it is stop mining and not giving enough power to the miner.
For the 2nd one try to replace PSU if you already did it then there might be grounded inside the miner. Also, test them one by one if it will run and maybe one of the hashboard is defective that causes other hashboard to show 0 ASIC.
You could try to contact these two lightfoot and wndsnb these are known tech for repairing hardware on ASIC machines.
Did you directly plug it on the wall outlet or did you use a voltage surge?
Your first logs only lead to power supply issues maybe your house is rated with 110v which is why it is stop mining and not giving enough power to the miner.
For the 2nd one try to replace PSU if you already did it then there might be grounded inside the miner. Also, test them one by one if it will run and maybe one of the hashboard is defective that causes other hashboard to show 0 ASIC.
You could try to contact these two lightfoot and wndsnb these are known tech for repairing hardware on ASIC machines.
i figured out that it is the controller board. I just do not know how to fix it
How did you figure out it was a control board issue? did you try a different control board? if you actually did, and it worked, it could be a different firmware, flash the same firmware on the "bad" control board and it should fix it.
Quote
The miner has mixed hashboard from diffrent batches,
Is there any other solution then the Antminer hash board code editor from ZeusBTC to synchronize the hash boards?
Is there any other solution then the Antminer hash board code editor from ZeusBTC to synchronize the hash boards?
Mixed hash boards can still work if they have the same product id/pcb, look for something like this in the kernel log
Code:
2021-08-09 12:41:02 driver-btm-api.c:589:get_product_id: product_id[0] = 0
2021-08-09 12:41:02 driver-btm-api.c:589:get_product_id: product_id[1] = 0
2021-08-09 12:41:02 driver-btm-api.c:589:get_product_id: product_id[2] = 0
2021-08-09 12:41:02 driver-btm-api.c:533:_set_project_type: project:0
2021-08-09 12:41:02 driver-btm-api.c:558:_set_project_type: Project type: Antminer S17 Pro
2021-08-09 12:41:02 driver-btm-api.c:569:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101
2021-08-09 12:41:02 driver-btm-api.c:570:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103
2021-08-09 12:41:02 driver-btm-api.c:569:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101
2021-08-09 12:41:02 driver-btm-api.c:570:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2021-08-09 12:41:02 driver-btm-api.c:569:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2021-08-09 12:41:02 driver-btm-api.c:570:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2021-08-09 12:41:02 driver-btm-api.c:589:get_product_id: product_id[1] = 0
2021-08-09 12:41:02 driver-btm-api.c:589:get_product_id: product_id[2] = 0
2021-08-09 12:41:02 driver-btm-api.c:533:_set_project_type: project:0
2021-08-09 12:41:02 driver-btm-api.c:558:_set_project_type: Project type: Antminer S17 Pro
2021-08-09 12:41:02 driver-btm-api.c:569:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101
2021-08-09 12:41:02 driver-btm-api.c:570:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103
2021-08-09 12:41:02 driver-btm-api.c:569:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101
2021-08-09 12:41:02 driver-btm-api.c:570:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2021-08-09 12:41:02 driver-btm-api.c:569:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2021-08-09 12:41:02 driver-btm-api.c:570:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
Another way to confirm if this is actually caused by mixing hash boards, run them 1 by 1, if they all work individually but not when mixed then you make sense, if they don't, then you have bigger problems to worry about.
thats all done I tested the Board in working miner, I also tested other hashboards und PSUs.
I tryed all firmware Braiins / MSKMiner
Prob 1
Prob 2
I tryed all firmware Braiins / MSKMiner
Prob 1
Quote
2021-08-08 13:33:13 driver-btm-api.c:758:init_freq_mode: This is scan-user version
2021-08-08 13:33:13 driver-btm-api.c:1954:bitmain_soc_init: opt_multi_version = 1
2021-08-08 13:33:13 driver-btm-api.c:1955:bitmain_soc_init: opt_bitmain_ab = 1
2021-08-08 13:33:13 driver-btm-api.c:1956:bitmain_soc_init: opt_bitmain_work_mode = 1
2021-08-08 13:33:13 driver-btm-api.c:1957:bitmain_soc_init: Miner compile time: Tue Aug 20 10:41:25 CST 2019 type: Antminer S17
2021-08-08 13:33:13 driver-btm-api.c:1958:bitmain_soc_init: commit version: 4b64fd6 2019-08-19 22:09:12, build by: lol 2019-08-20 11:00:22
2021-08-08 13:33:13 driver-btm-api.c:1776:show_sn: no SN got, please write SN to /nvdata/sn
2021-08-08 13:33:13 driver-btm-api.c:1236:miner_device_init: Detect 256MB control board of XILINX
2021-08-08 13:33:13 driver-btm-api.c:1184:init_fan_parameter: fan_eft : 0 fan_pwm : 100
2021-08-08 13:33:13 thread.c:653:create_read_nonce_reg_thread: create thread
2021-08-08 13:33:19 driver-btm-api.c:1168:init_miner_version: miner ID : 81788d864e104814
2021-08-08 13:33:19 driver-btm-api.c:1174:init_miner_version: FPGA Version = 0xB013
2021-08-08 13:33:25 driver-btm-api.c:820:get_product_id: product_id[0] = 0
2021-08-08 13:33:25 driver-btm-api.c:820:get_product_id: product_id[1] = 0
2021-08-08 13:33:25 driver-btm-api.c:820:get_product_id: product_id[2] = 0
2021-08-08 13:33:25 driver-btm-api.c:771:_set_project_type: project:1
2021-08-08 13:33:25 driver-btm-api.c:796:_set_project_type: Project type: Antminer S17
2021-08-08 13:33:25 driver-btm-api.c:807:dump_pcb_bom_version: Chain
2021-08-08 13:33:25 driver-btm-api.c:808:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2021-08-08 13:33:25 driver-btm-api.c:807:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2021-08-08 13:33:25 driver-btm-api.c:808:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2021-08-08 13:33:26 driver-btm-api.c:1877:bitmain_board_init: Fan check passed.
2021-08-08 13:33:28 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-08-08 13:33:31 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-08-08 13:33:33 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-08-08 13:33:36 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-08-08 13:33:38 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-08-08 13:33:42 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-08-08 13:33:42 thread.c:648:create_pic_heart_beat_thread: create thread
2021-08-08 13:33:42 power_api.c:202:power_init: Power init:
2021-08-08 13:33:42 power_api.c:203:power_init: current_voltage_raw = 0
2021-08-08 13:33:42 power_api.c:204:power_init: highest_voltage_raw = 2100
2021-08-08 13:33:42 power_api.c:205:power_init: working_voltage_raw = 1830
2021-08-08 13:33:42 power_api.c:206:power_init: higher_voltage_raw = 1950
2021-08-08 13:33:42 driver-btm-api.c:1887:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-08-08 13:33:42 power_api.c:176:power_off: init gpio907
2021-08-08 13:34:14 power_api.c:246:set_to_highest_voltage: Set to voltage raw 2100, one step.
2021-08-08 13:34:19 power_api.c:82:check_voltage_multi: retry time: 0
2021-08-08 13:34:21 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:34:23 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.620478
2021-08-08 13:34:25 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:34:25 power_api.c:50:_get_avg_voltage: average_voltage = 21.593945
2021-08-08 13:34:25 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:34:26 power_api.c:82:check_voltage_multi: retry time: 1
2021-08-08 13:34:28 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.577617
2021-08-08 13:34:31 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.608232
2021-08-08 13:34:34 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:34:34 power_api.c:50:_get_avg_voltage: average_voltage = 21.585781
2021-08-08 13:34:34 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:34:35 power_api.c:82:check_voltage_multi: retry time: 2
2021-08-08 13:34:37 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:34:39 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:34:41 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:34:41 power_api.c:50:_get_avg_voltage: average_voltage = 21.587822
2021-08-08 13:34:41 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:34:42 power_api.c:82:check_voltage_multi: retry time: 3
2021-08-08 13:34:43 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.577617
2021-08-08 13:34:45 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.602109
2021-08-08 13:34:47 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:34:47 power_api.c:50:_get_avg_voltage: average_voltage = 21.579658
2021-08-08 13:34:47 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:34:48 power_api.c:82:check_voltage_multi: retry time: 4
2021-08-08 13:34:50 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:34:53 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:34:56 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.595986
2021-08-08 13:34:56 power_api.c:50:_get_avg_voltage: average_voltage = 21.595986
2021-08-08 13:34:56 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.60, more than 0.5v diff.
2021-08-08 13:34:57 power_api.c:82:check_voltage_multi: retry time: 5
2021-08-08 13:34:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.608232
2021-08-08 13:35:01 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.589863
2021-08-08 13:35:03 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.553125
2021-08-08 13:35:03 power_api.c:50:_get_avg_voltage: average_voltage = 21.583740
2021-08-08 13:35:03 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:35:04 power_api.c:82:check_voltage_multi: retry time: 6
2021-08-08 13:35:05 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:35:09 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:35:12 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:35:12 power_api.c:50:_get_avg_voltage: average_voltage = 21.581699
2021-08-08 13:35:12 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:35:13 power_api.c:82:check_voltage_multi: retry time: 7
2021-08-08 13:35:15 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:35:17 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:35:18 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:35:18 power_api.c:50:_get_avg_voltage: average_voltage = 21.583740
2021-08-08 13:35:18 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:35:19 power_api.c:82:check_voltage_multi: retry time: 8
2021-08-08 13:35:21 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:35:23 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.589863
2021-08-08 13:35:25 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.577617
2021-08-08 13:35:25 power_api.c:50:_get_avg_voltage: average_voltage = 21.587822
2021-08-08 13:35:25 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:35:26 power_api.c:82:check_voltage_multi: retry time: 9
2021-08-08 13:35:28 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:35:31 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:35:34 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:35:34 power_api.c:50:_get_avg_voltage: average_voltage = 21.581699
2021-08-08 13:35:34 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:35:35 power_api.c:82:check_voltage_multi: retry time: 10
2021-08-08 13:35:37 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:35:39 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.583740
2021-08-08 13:35:41 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:35:41 power_api.c:50:_get_avg_voltage: average_voltage = 21.579658
2021-08-08 13:35:41 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:35:42 power_api.c:82:check_voltage_multi: retry time: 11
2021-08-08 13:35:43 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.577617
2021-08-08 13:35:46 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.608232
2021-08-08 13:35:50 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:35:50 power_api.c:50:_get_avg_voltage: average_voltage = 21.585781
2021-08-08 13:35:50 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:35:51 power_api.c:82:check_voltage_multi: retry time: 12
2021-08-08 13:35:53 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:35:54 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.614355
2021-08-08 13:35:56 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:35:56 power_api.c:50:_get_avg_voltage: average_voltage = 21.589863
2021-08-08 13:35:56 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:35:57 power_api.c:82:check_voltage_multi: retry time: 13
2021-08-08 13:35:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:36:01 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:36:03 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:36:03 power_api.c:50:_get_avg_voltage: average_voltage = 21.583740
2021-08-08 13:36:03 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:36:04 power_api.c:82:check_voltage_multi: retry time: 14
2021-08-08 13:36:06 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:36:09 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.589863
2021-08-08 13:36:12 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:36:12 power_api.c:50:_get_avg_voltage: average_voltage = 21.585781
2021-08-08 13:36:12 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:36:13 power_api.c:82:check_voltage_multi: retry time: 15
2021-08-08 13:36:15 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.571494
2021-08-08 13:36:17 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.602109
2021-08-08 13:36:18 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:36:18 power_api.c:50:_get_avg_voltage: average_voltage = 21.577617
2021-08-08 13:36:18 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:36:19 power_api.c:82:check_voltage_multi: retry time: 16
2021-08-08 13:36:21 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:36:24 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.608232
2021-08-08 13:36:27 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.553125
2021-08-08 13:36:27 power_api.c:50:_get_avg_voltage: average_voltage = 21.585781
2021-08-08 13:36:27 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:36:28 power_api.c:82:check_voltage_multi: retry time: 17
2021-08-08 13:36:31 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:36:32 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.583740
2021-08-08 13:36:34 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:36:34 power_api.c:50:_get_avg_voltage: average_voltage = 21.579658
2021-08-08 13:36:34 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:36:35 power_api.c:82:check_voltage_multi: retry time: 18
2021-08-08 13:36:37 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.602109
2021-08-08 13:36:39 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:36:40 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:36:40 power_api.c:50:_get_avg_voltage: average_voltage = 21.589863
2021-08-08 13:36:40 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:36:41 power_api.c:82:check_voltage_multi: retry time: 19
2021-08-08 13:36:44 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:36:47 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.614355
2021-08-08 13:36:50 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:36:50 power_api.c:50:_get_avg_voltage: average_voltage = 21.585781
2021-08-08 13:36:50 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:36:51 power_api.c:82:check_voltage_multi: retry time: 20
2021-08-08 13:36:53 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:36:54 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:36:56 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.583740
2021-08-08 13:36:56 power_api.c:50:_get_avg_voltage: average_voltage = 21.589863
2021-08-08 13:36:56 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:36:57 power_api.c:82:check_voltage_multi: retry time: 21
2021-08-08 13:36:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:37:02 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:37:05 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:37:05 power_api.c:50:_get_avg_voltage: average_voltage = 21.581699
2021-08-08 13:37:05 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:37:06 power_api.c:82:check_voltage_multi: retry time: 22
2021-08-08 13:37:08 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:37:10 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:37:12 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:37:12 power_api.c:50:_get_avg_voltage: average_voltage = 21.583740
2021-08-08 13:37:12 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:37:13 power_api.c:82:check_voltage_multi: retry time: 23
2021-08-08 13:37:15 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:37:16 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.608232
2021-08-08 13:37:18 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:37:18 power_api.c:50:_get_avg_voltage: average_voltage = 21.589863
2021-08-08 13:37:18 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:37:19 power_api.c:82:check_voltage_multi: retry time: 24
2021-08-08 13:37:21 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:37:24 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.608232
2021-08-08 13:37:28 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:37:28 power_api.c:50:_get_avg_voltage: average_voltage = 21.589863
2021-08-08 13:37:28 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:37:29 power_api.c:82:check_voltage_multi: retry time: 25
2021-08-08 13:37:30 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:37:32 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:37:34 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.583740
2021-08-08 13:37:34 power_api.c:50:_get_avg_voltage: average_voltage = 21.587822
2021-08-08 13:37:34 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:37:35 power_api.c:82:check_voltage_multi: retry time: 26
2021-08-08 13:37:37 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:37:40 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.602109
2021-08-08 13:37:43 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.553125
2021-08-08 13:37:43 power_api.c:50:_get_avg_voltage: average_voltage = 21.581699
2021-08-08 13:37:43 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:37:44 power_api.c:82:check_voltage_multi: retry time: 27
2021-08-08 13:37:46 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:37:48 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:37:50 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:37:50 power_api.c:50:_get_avg_voltage: average_voltage = 21.581699
2021-08-08 13:37:50 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:37:51 power_api.c:82:check_voltage_multi: retry time: 28
2021-08-08 13:37:52 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:37:54 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.602109
2021-08-08 13:37:56 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:37:56 power_api.c:50:_get_avg_voltage: average_voltage = 21.583740
2021-08-08 13:37:56 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:37:57 power_api.c:82:check_voltage_multi: retry time: 29
2021-08-08 13:37:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:38:02 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.583740
2021-08-08 13:38:05 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:38:05 power_api.c:50:_get_avg_voltage: average_voltage = 21.577617
2021-08-08 13:38:05 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:38:06 driver-btm-api.c:191:set_miner_status: ERROR_POWER_LOST
2021-08-08 13:38:06 driver-btm-api.c:132:stop_mining: stop mining: power set failed!
2021-08-08 13:38:06 thread.c:698:cancel_read_nonce_reg_thread: cancel thread
2021-08-08 13:38:06 driver-btm-api.c:118:killall_hashboard: ****power off hashboard***
2021-08-08 13:33:13 driver-btm-api.c:1954:bitmain_soc_init: opt_multi_version = 1
2021-08-08 13:33:13 driver-btm-api.c:1955:bitmain_soc_init: opt_bitmain_ab = 1
2021-08-08 13:33:13 driver-btm-api.c:1956:bitmain_soc_init: opt_bitmain_work_mode = 1
2021-08-08 13:33:13 driver-btm-api.c:1957:bitmain_soc_init: Miner compile time: Tue Aug 20 10:41:25 CST 2019 type: Antminer S17
2021-08-08 13:33:13 driver-btm-api.c:1958:bitmain_soc_init: commit version: 4b64fd6 2019-08-19 22:09:12, build by: lol 2019-08-20 11:00:22
2021-08-08 13:33:13 driver-btm-api.c:1776:show_sn: no SN got, please write SN to /nvdata/sn
2021-08-08 13:33:13 driver-btm-api.c:1236:miner_device_init: Detect 256MB control board of XILINX
2021-08-08 13:33:13 driver-btm-api.c:1184:init_fan_parameter: fan_eft : 0 fan_pwm : 100
2021-08-08 13:33:13 thread.c:653:create_read_nonce_reg_thread: create thread
2021-08-08 13:33:19 driver-btm-api.c:1168:init_miner_version: miner ID : 81788d864e104814
2021-08-08 13:33:19 driver-btm-api.c:1174:init_miner_version: FPGA Version = 0xB013
2021-08-08 13:33:25 driver-btm-api.c:820:get_product_id: product_id[0] = 0
2021-08-08 13:33:25 driver-btm-api.c:820:get_product_id: product_id[1] = 0
2021-08-08 13:33:25 driver-btm-api.c:820:get_product_id: product_id[2] = 0
2021-08-08 13:33:25 driver-btm-api.c:771:_set_project_type: project:1
2021-08-08 13:33:25 driver-btm-api.c:796:_set_project_type: Project type: Antminer S17
2021-08-08 13:33:25 driver-btm-api.c:807:dump_pcb_bom_version: Chain
- PCB Version: 0x0101
- BOM Version: 0x0103
2021-08-08 13:33:25 driver-btm-api.c:808:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2021-08-08 13:33:25 driver-btm-api.c:807:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2021-08-08 13:33:25 driver-btm-api.c:808:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2021-08-08 13:33:26 driver-btm-api.c:1877:bitmain_board_init: Fan check passed.
2021-08-08 13:33:28 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-08-08 13:33:31 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-08-08 13:33:33 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-08-08 13:33:36 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-08-08 13:33:38 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-08-08 13:33:42 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-08-08 13:33:42 thread.c:648:create_pic_heart_beat_thread: create thread
2021-08-08 13:33:42 power_api.c:202:power_init: Power init:
2021-08-08 13:33:42 power_api.c:203:power_init: current_voltage_raw = 0
2021-08-08 13:33:42 power_api.c:204:power_init: highest_voltage_raw = 2100
2021-08-08 13:33:42 power_api.c:205:power_init: working_voltage_raw = 1830
2021-08-08 13:33:42 power_api.c:206:power_init: higher_voltage_raw = 1950
2021-08-08 13:33:42 driver-btm-api.c:1887:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-08-08 13:33:42 power_api.c:176:power_off: init gpio907
2021-08-08 13:34:14 power_api.c:246:set_to_highest_voltage: Set to voltage raw 2100, one step.
2021-08-08 13:34:19 power_api.c:82:check_voltage_multi: retry time: 0
2021-08-08 13:34:21 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:34:23 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.620478
2021-08-08 13:34:25 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:34:25 power_api.c:50:_get_avg_voltage: average_voltage = 21.593945
2021-08-08 13:34:25 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:34:26 power_api.c:82:check_voltage_multi: retry time: 1
2021-08-08 13:34:28 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.577617
2021-08-08 13:34:31 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.608232
2021-08-08 13:34:34 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:34:34 power_api.c:50:_get_avg_voltage: average_voltage = 21.585781
2021-08-08 13:34:34 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:34:35 power_api.c:82:check_voltage_multi: retry time: 2
2021-08-08 13:34:37 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:34:39 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:34:41 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:34:41 power_api.c:50:_get_avg_voltage: average_voltage = 21.587822
2021-08-08 13:34:41 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:34:42 power_api.c:82:check_voltage_multi: retry time: 3
2021-08-08 13:34:43 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.577617
2021-08-08 13:34:45 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.602109
2021-08-08 13:34:47 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:34:47 power_api.c:50:_get_avg_voltage: average_voltage = 21.579658
2021-08-08 13:34:47 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:34:48 power_api.c:82:check_voltage_multi: retry time: 4
2021-08-08 13:34:50 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:34:53 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:34:56 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.595986
2021-08-08 13:34:56 power_api.c:50:_get_avg_voltage: average_voltage = 21.595986
2021-08-08 13:34:56 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.60, more than 0.5v diff.
2021-08-08 13:34:57 power_api.c:82:check_voltage_multi: retry time: 5
2021-08-08 13:34:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.608232
2021-08-08 13:35:01 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.589863
2021-08-08 13:35:03 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.553125
2021-08-08 13:35:03 power_api.c:50:_get_avg_voltage: average_voltage = 21.583740
2021-08-08 13:35:03 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:35:04 power_api.c:82:check_voltage_multi: retry time: 6
2021-08-08 13:35:05 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:35:09 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:35:12 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:35:12 power_api.c:50:_get_avg_voltage: average_voltage = 21.581699
2021-08-08 13:35:12 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:35:13 power_api.c:82:check_voltage_multi: retry time: 7
2021-08-08 13:35:15 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:35:17 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:35:18 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:35:18 power_api.c:50:_get_avg_voltage: average_voltage = 21.583740
2021-08-08 13:35:18 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:35:19 power_api.c:82:check_voltage_multi: retry time: 8
2021-08-08 13:35:21 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:35:23 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.589863
2021-08-08 13:35:25 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.577617
2021-08-08 13:35:25 power_api.c:50:_get_avg_voltage: average_voltage = 21.587822
2021-08-08 13:35:25 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:35:26 power_api.c:82:check_voltage_multi: retry time: 9
2021-08-08 13:35:28 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:35:31 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:35:34 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:35:34 power_api.c:50:_get_avg_voltage: average_voltage = 21.581699
2021-08-08 13:35:34 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:35:35 power_api.c:82:check_voltage_multi: retry time: 10
2021-08-08 13:35:37 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:35:39 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.583740
2021-08-08 13:35:41 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:35:41 power_api.c:50:_get_avg_voltage: average_voltage = 21.579658
2021-08-08 13:35:41 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:35:42 power_api.c:82:check_voltage_multi: retry time: 11
2021-08-08 13:35:43 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.577617
2021-08-08 13:35:46 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.608232
2021-08-08 13:35:50 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:35:50 power_api.c:50:_get_avg_voltage: average_voltage = 21.585781
2021-08-08 13:35:50 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:35:51 power_api.c:82:check_voltage_multi: retry time: 12
2021-08-08 13:35:53 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:35:54 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.614355
2021-08-08 13:35:56 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:35:56 power_api.c:50:_get_avg_voltage: average_voltage = 21.589863
2021-08-08 13:35:56 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:35:57 power_api.c:82:check_voltage_multi: retry time: 13
2021-08-08 13:35:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:36:01 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:36:03 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:36:03 power_api.c:50:_get_avg_voltage: average_voltage = 21.583740
2021-08-08 13:36:03 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:36:04 power_api.c:82:check_voltage_multi: retry time: 14
2021-08-08 13:36:06 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:36:09 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.589863
2021-08-08 13:36:12 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:36:12 power_api.c:50:_get_avg_voltage: average_voltage = 21.585781
2021-08-08 13:36:12 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:36:13 power_api.c:82:check_voltage_multi: retry time: 15
2021-08-08 13:36:15 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.571494
2021-08-08 13:36:17 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.602109
2021-08-08 13:36:18 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:36:18 power_api.c:50:_get_avg_voltage: average_voltage = 21.577617
2021-08-08 13:36:18 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:36:19 power_api.c:82:check_voltage_multi: retry time: 16
2021-08-08 13:36:21 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:36:24 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.608232
2021-08-08 13:36:27 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.553125
2021-08-08 13:36:27 power_api.c:50:_get_avg_voltage: average_voltage = 21.585781
2021-08-08 13:36:27 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:36:28 power_api.c:82:check_voltage_multi: retry time: 17
2021-08-08 13:36:31 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:36:32 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.583740
2021-08-08 13:36:34 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:36:34 power_api.c:50:_get_avg_voltage: average_voltage = 21.579658
2021-08-08 13:36:34 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:36:35 power_api.c:82:check_voltage_multi: retry time: 18
2021-08-08 13:36:37 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.602109
2021-08-08 13:36:39 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:36:40 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:36:40 power_api.c:50:_get_avg_voltage: average_voltage = 21.589863
2021-08-08 13:36:40 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:36:41 power_api.c:82:check_voltage_multi: retry time: 19
2021-08-08 13:36:44 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:36:47 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.614355
2021-08-08 13:36:50 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:36:50 power_api.c:50:_get_avg_voltage: average_voltage = 21.585781
2021-08-08 13:36:50 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:36:51 power_api.c:82:check_voltage_multi: retry time: 20
2021-08-08 13:36:53 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:36:54 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:36:56 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.583740
2021-08-08 13:36:56 power_api.c:50:_get_avg_voltage: average_voltage = 21.589863
2021-08-08 13:36:56 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:36:57 power_api.c:82:check_voltage_multi: retry time: 21
2021-08-08 13:36:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:37:02 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:37:05 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:37:05 power_api.c:50:_get_avg_voltage: average_voltage = 21.581699
2021-08-08 13:37:05 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:37:06 power_api.c:82:check_voltage_multi: retry time: 22
2021-08-08 13:37:08 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:37:10 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:37:12 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:37:12 power_api.c:50:_get_avg_voltage: average_voltage = 21.583740
2021-08-08 13:37:12 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:37:13 power_api.c:82:check_voltage_multi: retry time: 23
2021-08-08 13:37:15 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-08 13:37:16 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.608232
2021-08-08 13:37:18 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:37:18 power_api.c:50:_get_avg_voltage: average_voltage = 21.589863
2021-08-08 13:37:18 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:37:19 power_api.c:82:check_voltage_multi: retry time: 24
2021-08-08 13:37:21 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:37:24 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.608232
2021-08-08 13:37:28 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.571494
2021-08-08 13:37:28 power_api.c:50:_get_avg_voltage: average_voltage = 21.589863
2021-08-08 13:37:28 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:37:29 power_api.c:82:check_voltage_multi: retry time: 25
2021-08-08 13:37:30 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:37:32 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:37:34 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.583740
2021-08-08 13:37:34 power_api.c:50:_get_avg_voltage: average_voltage = 21.587822
2021-08-08 13:37:34 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.59, more than 0.5v diff.
2021-08-08 13:37:35 power_api.c:82:check_voltage_multi: retry time: 26
2021-08-08 13:37:37 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:37:40 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.602109
2021-08-08 13:37:43 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.553125
2021-08-08 13:37:43 power_api.c:50:_get_avg_voltage: average_voltage = 21.581699
2021-08-08 13:37:43 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:37:44 power_api.c:82:check_voltage_multi: retry time: 27
2021-08-08 13:37:46 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:37:48 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.595986
2021-08-08 13:37:50 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:37:50 power_api.c:50:_get_avg_voltage: average_voltage = 21.581699
2021-08-08 13:37:50 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:37:51 power_api.c:82:check_voltage_multi: retry time: 28
2021-08-08 13:37:52 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.589863
2021-08-08 13:37:54 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.602109
2021-08-08 13:37:56 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.559248
2021-08-08 13:37:56 power_api.c:50:_get_avg_voltage: average_voltage = 21.583740
2021-08-08 13:37:56 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:37:57 power_api.c:82:check_voltage_multi: retry time: 29
2021-08-08 13:37:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:38:02 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.583740
2021-08-08 13:38:05 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:38:05 power_api.c:50:_get_avg_voltage: average_voltage = 21.577617
2021-08-08 13:38:05 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:38:06 driver-btm-api.c:191:set_miner_status: ERROR_POWER_LOST
2021-08-08 13:38:06 driver-btm-api.c:132:stop_mining: stop mining: power set failed!
2021-08-08 13:38:06 thread.c:698:cancel_read_nonce_reg_thread: cancel thread
2021-08-08 13:38:06 driver-btm-api.c:118:killall_hashboard: ****power off hashboard***
Prob 2
Quote
2021-08-06 14:16:57 driver-btm-api.c:542:init_freq_mode: This is scan-user version
2021-08-06 14:16:57 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version = 1
2021-08-06 14:16:57 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab = 1
2021-08-06 14:16:57 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 2
2021-08-06 14:16:57 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:23:07 CST 2020 type: Antminer S17
2021-08-06 14:16:57 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:30:25
2021-08-06 14:16:57 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn
2021-08-06 14:16:57 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX
2021-08-06 14:16:57 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-08-06 14:16:57 thread.c:783:create_read_nonce_reg_thread: create thread
2021-08-06 14:17:03 driver-btm-api.c:972:init_miner_version: miner ID : 81788d864e104814
2021-08-06 14:17:03 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013
2021-08-06 14:17:09 driver-btm-api.c:616:get_product_id: product_id[0] = 0
2021-08-06 14:17:09 driver-btm-api.c:616:get_product_id: product_id[1] = 0
2021-08-06 14:17:09 driver-btm-api.c:616:get_product_id: product_id[2] = 0
2021-08-06 14:17:09 driver-btm-api.c:560:_set_project_type: project:1
2021-08-06 14:17:09 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17
2021-08-06 14:17:09 driver-btm-api.c:596:dump_pcb_bom_version: Chain
2021-08-06 14:17:09 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2021-08-06 14:17:09 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2021-08-06 14:17:09 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2021-08-06 14:17:10 driver-btm-api.c:1802:bitmain_board_init: Fan check passed.
2021-08-06 14:17:11 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-08-06 14:17:13 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-08-06 14:17:14 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-08-06 14:17:16 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-08-06 14:17:17 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-08-06 14:17:19 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-08-06 14:17:19 thread.c:778:create_pic_heart_beat_thread: create thread
2021-08-06 14:17:19 power_api.c:207:power_init: Power init:
2021-08-06 14:17:19 power_api.c:208:power_init: current_voltage_raw = 0
2021-08-06 14:17:19 power_api.c:209:power_init: highest_voltage_raw = 2100
2021-08-06 14:17:19 power_api.c:210:power_init: working_voltage_raw = 1830
2021-08-06 14:17:19 power_api.c:211:power_init: higher_voltage_raw = 1950
2021-08-06 14:17:19 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-08-06 14:17:19 power_api.c:181:power_off: init gpio907
2021-08-06 14:17:51 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step.
2021-08-06 14:17:53 power_api.c:87:check_voltage_multi: retry time: 0
2021-08-06 14:17:54 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-06 14:17:55 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.620478
2021-08-06 14:17:56 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-06 14:17:56 power_api.c:50:_get_avg_voltage: average_voltage = 21.593945
2021-08-06 14:17:56 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.59, check voltage passed.
2021-08-06 14:17:56 uart.c:71:set_baud: set fpga_baud to 115200
2021-08-06 14:18:07 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2021-08-06 14:18:18 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2021-08-06 14:18:29 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2021-08-06 14:18:29 driver-btm-api.c:942:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2021-08-06 14:18:41 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2021-08-06 14:18:52 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2021-08-06 14:19:02 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2021-08-06 14:19:02 driver-btm-api.c:942:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2021-08-06 14:19:14 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2021-08-06 14:19:25 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2021-08-06 14:19:35 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2021-08-06 14:19:35 driver-btm-api.c:942:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2021-08-06 14:19:36 driver-btm-api.c:198:set_miner_status: ERROR_SOC_INIT
2021-08-06 14:19:36 driver-btm-api.c:139:stop_mining: stop mining: soc init failed!
2021-08-06 14:19:36 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
2021-08-06 14:19:36 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****
2021-08-06 14:16:57 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version = 1
2021-08-06 14:16:57 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab = 1
2021-08-06 14:16:57 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 2
2021-08-06 14:16:57 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:23:07 CST 2020 type: Antminer S17
2021-08-06 14:16:57 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:30:25
2021-08-06 14:16:57 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn
2021-08-06 14:16:57 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX
2021-08-06 14:16:57 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2021-08-06 14:16:57 thread.c:783:create_read_nonce_reg_thread: create thread
2021-08-06 14:17:03 driver-btm-api.c:972:init_miner_version: miner ID : 81788d864e104814
2021-08-06 14:17:03 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013
2021-08-06 14:17:09 driver-btm-api.c:616:get_product_id: product_id[0] = 0
2021-08-06 14:17:09 driver-btm-api.c:616:get_product_id: product_id[1] = 0
2021-08-06 14:17:09 driver-btm-api.c:616:get_product_id: product_id[2] = 0
2021-08-06 14:17:09 driver-btm-api.c:560:_set_project_type: project:1
2021-08-06 14:17:09 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17
2021-08-06 14:17:09 driver-btm-api.c:596:dump_pcb_bom_version: Chain
- PCB Version: 0x0101
- BOM Version: 0x0103
2021-08-06 14:17:09 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2021-08-06 14:17:09 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2021-08-06 14:17:09 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2021-08-06 14:17:10 driver-btm-api.c:1802:bitmain_board_init: Fan check passed.
2021-08-06 14:17:11 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-08-06 14:17:13 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-08-06 14:17:14 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-08-06 14:17:16 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-08-06 14:17:17 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-08-06 14:17:19 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-08-06 14:17:19 thread.c:778:create_pic_heart_beat_thread: create thread
2021-08-06 14:17:19 power_api.c:207:power_init: Power init:
2021-08-06 14:17:19 power_api.c:208:power_init: current_voltage_raw = 0
2021-08-06 14:17:19 power_api.c:209:power_init: highest_voltage_raw = 2100
2021-08-06 14:17:19 power_api.c:210:power_init: working_voltage_raw = 1830
2021-08-06 14:17:19 power_api.c:211:power_init: higher_voltage_raw = 1950
2021-08-06 14:17:19 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-08-06 14:17:19 power_api.c:181:power_off: init gpio907
2021-08-06 14:17:51 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step.
2021-08-06 14:17:53 power_api.c:87:check_voltage_multi: retry time: 0
2021-08-06 14:17:54 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.595986
2021-08-06 14:17:55 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.620478
2021-08-06 14:17:56 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-06 14:17:56 power_api.c:50:_get_avg_voltage: average_voltage = 21.593945
2021-08-06 14:17:56 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.59, check voltage passed.
2021-08-06 14:17:56 uart.c:71:set_baud: set fpga_baud to 115200
2021-08-06 14:18:07 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2021-08-06 14:18:18 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2021-08-06 14:18:29 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2021-08-06 14:18:29 driver-btm-api.c:942:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2021-08-06 14:18:41 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2021-08-06 14:18:52 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2021-08-06 14:19:02 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2021-08-06 14:19:02 driver-btm-api.c:942:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2021-08-06 14:19:14 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2021-08-06 14:19:25 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2021-08-06 14:19:35 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2021-08-06 14:19:35 driver-btm-api.c:942:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2021-08-06 14:19:36 driver-btm-api.c:198:set_miner_status: ERROR_SOC_INIT
2021-08-06 14:19:36 driver-btm-api.c:139:stop_mining: stop mining: soc init failed!
2021-08-06 14:19:36 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
2021-08-06 14:19:36 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****
I would suggest you put the whole kernel logs here not the few parts use the # button instead of quote.
On the first one, how did you know that the problem is the control board? Did you test it on another s17 miner?
The logs show "set_miner_status: ERROR_POWER_LOST" there is a possibility that this issue should lead to the PSU issue, not the control board.
For the second one try to replug all cable from your hash board to the control board do the same on the PSU cable then test it again.
If not, try to flash it with the latest firmware from Bitmain(Note it might disable the SSH access).
On the first one, how did you know that the problem is the control board? Did you test it on another s17 miner?
The logs show "set_miner_status: ERROR_POWER_LOST" there is a possibility that this issue should lead to the PSU issue, not the control board.
For the second one try to replug all cable from your hash board to the control board do the same on the PSU cable then test it again.
If not, try to flash it with the latest firmware from Bitmain(Note it might disable the SSH access).
Hi,
I have two S17 and two different problems.
I get two miners from a friend that hopes that i can fix them.
The first one has the following probs
i figured out that it is the controller board. I just do not know how to fix it
The second Miner has following error.
The miner has mixed hashboard from diffrent batches,
Is there any other solution then the Antminer hash board code editor from ZeusBTC to synchronize the hash boards?
i hope for feedback :-)
I have two S17 and two different problems.
I get two miners from a friend that hopes that i can fix them.
The first one has the following probs
i figured out that it is the controller board. I just do not know how to fix it
Quote
2021-08-08 13:37:57 power_api.c:82:check_voltage_multi: retry time: 29
2021-08-08 13:37:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:38:02 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.583740
2021-08-08 13:38:05 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:38:05 power_api.c:50:_get_avg_voltage: average_voltage = 21.577617
2021-08-08 13:38:05 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:38:06 driver-btm-api.c:191:set_miner_status: ERROR_POWER_LOST
2021-08-08 13:38:06 driver-btm-api.c:132:stop_mining: stop mining: power set failed!
2021-08-08 13:38:06 thread.c:698:cancel_read_nonce_reg_thread: cancel thread
2021-08-08 13:38:06 driver-btm-api.c:118:killall_hashboard: ****power off hashboard***
2021-08-08 13:37:59 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.583740
2021-08-08 13:38:02 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.583740
2021-08-08 13:38:05 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.565371
2021-08-08 13:38:05 power_api.c:50:_get_avg_voltage: average_voltage = 21.577617
2021-08-08 13:38:05 power_api.c:63:check_voltage: target_vol = 21.00, actural_vol = 21.58, more than 0.5v diff.
2021-08-08 13:38:06 driver-btm-api.c:191:set_miner_status: ERROR_POWER_LOST
2021-08-08 13:38:06 driver-btm-api.c:132:stop_mining: stop mining: power set failed!
2021-08-08 13:38:06 thread.c:698:cancel_read_nonce_reg_thread: cancel thread
2021-08-08 13:38:06 driver-btm-api.c:118:killall_hashboard: ****power off hashboard***
The second Miner has following error.
The miner has mixed hashboard from diffrent batches,
Is there any other solution then the Antminer hash board code editor from ZeusBTC to synchronize the hash boards?
Quote
2021-08-06 14:18:07 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2021-08-06 14:18:18 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2021-08-06 14:18:29 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2021-08-06 14:18:29 driver-btm-api.c:942:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2021-08-06 14:18:41 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2021-08-06 14:18:52 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2021-08-06 14:19:02 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2021-08-06 14:19:02 driver-btm-api.c:942:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2021-08-06 14:19:14 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2021-08-06 14:19:25 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2021-08-06 14:19:35 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2021-08-06 14:19:35 driver-btm-api.c:942:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2021-08-06 14:19:36 driver-btm-api.c:198:set_miner_status: ERROR_SOC_INIT
2021-08-06 14:19:36 driver-btm-api.c:139:stop_mining: stop mining: soc init failed!
2021-08-06 14:19:36 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
2021-08-06 14:19:36 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****
2021-08-06 14:18:18 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2021-08-06 14:18:29 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2021-08-06 14:18:29 driver-btm-api.c:942:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2021-08-06 14:18:41 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2021-08-06 14:18:52 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2021-08-06 14:19:02 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2021-08-06 14:19:02 driver-btm-api.c:942:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2021-08-06 14:19:14 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2021-08-06 14:19:25 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2021-08-06 14:19:35 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2021-08-06 14:19:35 driver-btm-api.c:942:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2021-08-06 14:19:36 driver-btm-api.c:198:set_miner_status: ERROR_SOC_INIT
2021-08-06 14:19:36 driver-btm-api.c:139:stop_mining: stop mining: soc init failed!
2021-08-06 14:19:36 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
2021-08-06 14:19:36 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****
i hope for feedback :-)
Jump to: