tx not confirmed long time.. | Bitcointalksearch.org

0xfff

full member

Activity: 224

Merit: 100

Quote from: BitcoinPanther on February 16, 2017, 04:33:25 PM

Quote from: 0xfff on February 16, 2017, 04:23:47 PM

Quote from: Winner on February 16, 2017, 04:18:51 PM

Quote from: 0xfff on February 16, 2017, 11:05:22 AM

Why are people so cheap on fees? 5 satoshi per byte? You could spend $0.10 and now have to deal with delayed transaction. I don't understand Huh

0xfff, I think it's because people posting in this forum is mostly from the third world countries and such (Africa, Malaysia, etc). Since the work there is pretty much low paying the money is pretty important to them so they try to keep the most that they can.

Some people just use the low fee because they don't really know the technical side of the transaction fee, so they put whatever they want.

$0.10 is good, I don't see why people pay $0.37 to send a transaction. The only reason to spend that much would be if they needed to purchase something within 4 minutes.

Good thinking. Few cents of a dollar would mean a lot to people in poor countries. If the block size ever increases fees would go down and it would help out these guys.

I saw a transaction with 37k satoshi as tx fee and yet it is still unconfirmed after several hours. I thought you said $0.10 usd is good and yet this transaction have not made it thru. Not a single confirmation after 5 hours lol.

Transaction priority is satoshi/kb. Miners can only fit so many kb in each block. A massive transaction could have a $.37 fee and be under 5 satoshi/kb and never be confirmed.

BitcoinPanther

hero member

Activity: 1918

Merit: 564

Quote from: 0xfff on February 16, 2017, 04:23:47 PM

Quote from: Winner on February 16, 2017, 04:18:51 PM

Quote from: 0xfff on February 16, 2017, 11:05:22 AM

Why are people so cheap on fees? 5 satoshi per byte? You could spend $0.10 and now have to deal with delayed transaction. I don't understand Huh

0xfff, I think it's because people posting in this forum is mostly from the third world countries and such (Africa, Malaysia, etc). Since the work there is pretty much low paying the money is pretty important to them so they try to keep the most that they can.

Some people just use the low fee because they don't really know the technical side of the transaction fee, so they put whatever they want.

$0.10 is good, I don't see why people pay $0.37 to send a transaction. The only reason to spend that much would be if they needed to purchase something within 4 minutes.

Good thinking. Few cents of a dollar would mean a lot to people in poor countries. If the block size ever increases fees would go down and it would help out these guys.

I saw a transaction with 37k satoshi as tx fee and yet it is still unconfirmed after several hours. I thought you said $0.10 usd is good and yet this transaction have not made it thru. Not a single confirmation after 5 hours lol.

0xfff

full member

Activity: 224

Merit: 100

Quote from: Winner on February 16, 2017, 04:18:51 PM

Quote from: 0xfff on February 16, 2017, 11:05:22 AM

Why are people so cheap on fees? 5 satoshi per byte? You could spend $0.10 and now have to deal with delayed transaction. I don't understand Huh

0xfff, I think it's because people posting in this forum is mostly from the third world countries and such (Africa, Malaysia, etc). Since the work there is pretty much low paying the money is pretty important to them so they try to keep the most that they can.

Some people just use the low fee because they don't really know the technical side of the transaction fee, so they put whatever they want.

$0.10 is good, I don't see why people pay $0.37 to send a transaction. The only reason to spend that much would be if they needed to purchase something within 4 minutes.

Good thinking. Few cents of a dollar would mean a lot to people in poor countries. If the block size ever increases fees would go down and it would help out these guys.

Winner

legendary

Activity: 1190

Merit: 1000

Look ARROUND!

Quote from: 0xfff on February 16, 2017, 11:05:22 AM

Why are people so cheap on fees? 5 satoshi per byte? You could spend $0.10 and now have to deal with delayed transaction. I don't understand Huh

0xfff, I think it's because people posting in this forum is mostly from the third world countries and such (Africa, Malaysia, etc). Since the work there is pretty much low paying the money is pretty important to them so they try to keep the most that they can.

Some people just use the low fee because they don't really know the technical side of the transaction fee, so they put whatever they want.

$0.10 is good, I don't see why people pay $0.37 to send a transaction. The only reason to spend that much would be if they needed to purchase something within 4 minutes.

0xfff

full member

Activity: 224

Merit: 100

Why are people so cheap on fees? 5 satoshi per byte? You could spend $0.10 and now have to deal with delayed transaction. I don't understand Huh

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Quote from: crazybtrade on February 10, 2017, 07:24:24 AM

How you create this raw transaction?
Please explain.

I trying before use online service.. Have error, because input has been spent

I wrote a tool a while back that takes a raw transaction and will modify it to boost the fee: https://github.com/achow101/feebooster. This tool has a few bugs and nuances that make it so I don't recommend people to use it, although you can if you know how raw transactions work. I just ran your transaction through my tool to create the raw unsigned transaction.

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 08, 2017, 08:36:07 PM

Below is the unsigned transaction. It pays a fee of 318880 satoshis which I deducted from the second output of your original transaction (0.01000001 BTC being sent to 129Q8uADs9BpwDnFDJZnHYYuaxuu3NiKZh is now 0.00691121 BTC sent to that address). If you want the fee to be deducted from the other output, please let me know. Otherwise, the below hex string is your raw transaction.

Code:

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

How you create this raw transaction?
Please explain.

I trying before use online service.. Have error, because input has been spent

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 09, 2017, 09:29:08 PM

Quote from: crazybtrade on February 09, 2017, 09:24:51 PM

Thanks man!!!
I resolved it!

new txid https://blockchain.info/tx/7e337f0015f9916436db7174d33359633efe82ab281e445b90a423666701961b confirmed!

old txid https://blockchain.info/tx/7b41cec5e2db41aed6985e6d3f7cdacf6f60431ebe383ba09e096cc82f5e67a4

will be old TX reject soon?

The old transaction is considered a double spend so it will never be able to confirm. That transaction should already have been rejected by virtually all nodes, it only shows in block explorers because they show those transactions for information purposes.

Quote from: crazybtrade on February 09, 2017, 09:24:51 PM

give me your wallet for rewards

My address is in my profile and under my avatar.

paid 0.003BTC i don't want post txid.
Thanks!

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Quote from: crazybtrade on February 09, 2017, 09:24:51 PM

Thanks man!!!
I resolved it!

new txid https://blockchain.info/tx/7e337f0015f9916436db7174d33359633efe82ab281e445b90a423666701961b confirmed!

old txid https://blockchain.info/tx/7b41cec5e2db41aed6985e6d3f7cdacf6f60431ebe383ba09e096cc82f5e67a4

will be old TX reject soon?

The old transaction is considered a double spend so it will never be able to confirm. That transaction should already have been rejected by virtually all nodes, it only shows in block explorers because they show those transactions for information purposes.

Quote from: crazybtrade on February 09, 2017, 09:24:51 PM

give me your wallet for rewards

My address is in my profile and under my avatar.

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 09, 2017, 08:56:43 AM

Quote from: crazybtrade on February 09, 2017, 06:20:36 AM

i use script and use funtction

Code:

$bitcoin->signrawtransaction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

result is Complete=1

where can see result hex code?

If you don't know how your script works and how to get the resulting JSON object out of it, please don't use your script. Just use the command that I gave you, that will output everything that we need to the console. I don't know what your script is so I can't help you with your script. Just use the command that I gave you.

Quote from: kalpit on February 09, 2017, 06:31:59 AM

I haven't done Bitcoin mining myself. So I'm new to it.

I was wondering, can he not do mining for some time at a lower fee requirement?

That's not how this works. The mining difficulty is way too high for anyone with their computer to just mine Bitcoin. Mining would not help unless he was able to find a block within a reasonable amount of time, and that requires a massive investment into tens of thousands of dollars of equipment.

Thanks man!!!
I resolved it!

new txid https://blockchain.info/tx/7e337f0015f9916436db7174d33359633efe82ab281e445b90a423666701961b confirmed!

old txid https://blockchain.info/tx/7b41cec5e2db41aed6985e6d3f7cdacf6f60431ebe383ba09e096cc82f5e67a4

will be old TX reject soon?

give me your wallet for rewards

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Quote from: crazybtrade on February 09, 2017, 06:20:36 AM

i use script and use funtction

Code:

$bitcoin->signrawtransaction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

result is Complete=1

where can see result hex code?

If you don't know how your script works and how to get the resulting JSON object out of it, please don't use your script. Just use the command that I gave you, that will output everything that we need to the console. I don't know what your script is so I can't help you with your script. Just use the command that I gave you.

Quote from: kalpit on February 09, 2017, 06:31:59 AM

I haven't done Bitcoin mining myself. So I'm new to it.

I was wondering, can he not do mining for some time at a lower fee requirement?

That's not how this works. The mining difficulty is way too high for anyone with their computer to just mine Bitcoin. Mining would not help unless he was able to find a block within a reasonable amount of time, and that requires a massive investment into tens of thousands of dollars of equipment.

kalpit

sr. member

Activity: 560

Merit: 250

I haven't done Bitcoin mining myself. So I'm new to it.

I was wondering, can he not do mining for some time at a lower fee requirement?

crazybtrade

sr. member

Activity: 420

Merit: 250

i use script and use funtction

Code:

$bitcoin->signrawtransaction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

result is Complete=1

where can see result hex code?

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 08, 2017, 10:58:39 PM

Quote from: crazybtrade on February 08, 2017, 10:56:31 PM

OK. but i understand.. why can't use bitcoin-cli sendrawtransaction "signedhex" after?

I already explained that to you, but here it is again because apparently you can't seem to be bothered to scroll up and read.

Quote from: achow101 on February 08, 2017, 08:36:07 PM

Any double spend transaction that you make will not be able to be broadcast through your node. That is because the transaction you are trying to double spend is in your node's mempool and in the wallet, so it will reject the double spend as invalid. [Your node considers the transaction a double spend (because technically it is) so it will reject it and refuse to broadcast it.]

Ok. Thanks for help!
I will post about throgh 7 hours.. Can't make it now

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Quote from: crazybtrade on February 08, 2017, 10:56:31 PM

OK. but i understand.. why can't use bitcoin-cli sendrawtransaction "signedhex" after?

I already explained that to you, but here it is again because apparently you can't seem to be bothered to scroll up and read.

Quote from: achow101 on February 08, 2017, 08:36:07 PM

Any double spend transaction that you make will not be able to be broadcast through your node. That is because the transaction you are trying to double spend is in your node's mempool and in the wallet, so it will reject the double spend as invalid. [Your node considers the transaction a double spend (because technically it is) so it will reject it and refuse to broadcast it.]

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 08, 2017, 10:42:55 PM

Quote from: crazybtrade on February 08, 2017, 10:34:22 PM

Why i can't sign transaction by myself? i afraid lose my money..

You are signing the transaction yourself. The command I gave you is to sign the transaction. You won't lose any money, and if you are concerned that you will, you can check the that the transaction is correct by running

Code:

bitcoin-cli decoderawtransaction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

This will give you all of the details about the transaction and you can check that they are all the same as the original except one output (the second output, index 1) has a significantly less amount to pay for the transaction fee.

I have already explained why you cannot broadcast the transaction yourself. Please actually read my posts.

OK. but i understand.. why can't use bitcoin-cli sendrawtransaction "signedhex" after?

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Quote from: crazybtrade on February 08, 2017, 10:34:22 PM

Why i can't sign transaction by myself? i afraid lose my money..

You are signing the transaction yourself. The command I gave you is to sign the transaction. You won't lose any money, and if you are concerned that you will, you can check the that the transaction is correct by running

Code:

bitcoin-cli decoderawtransaction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

This will give you all of the details about the transaction and you can check that they are all the same as the original except one output (the second output, index 1) has a significantly less amount to pay for the transaction fee.

I have already explained why you cannot broadcast the transaction yourself. Please actually read my posts.

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 08, 2017, 10:23:16 PM

Quote from: crazybtrade on February 08, 2017, 10:19:50 PM

OK.
What need make after this command?

Thanks!

After you run that command, you will get a bunch of output on the terminal. Post all of that here. That is the raw hex for the signed transaction. I will broadcast it using my own software. You probably won't see the transaction in your wallet though until it confirms. You should be able to see it on most block explorers.

Why i can't sign transaction by myself? i afraid lose my money..

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Quote from: crazybtrade on February 08, 2017, 10:19:50 PM

OK.
What need make after this command?

Thanks!

After you run that command, you will get a bunch of output on the terminal. Post all of that here. That is the raw hex for the signed transaction. I will broadcast it using my own software. You probably won't see the transaction in your wallet though until it confirms. You should be able to see it on most block explorers.

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 08, 2017, 08:36:07 PM

Any double spend transaction that you make will not be able to be broadcast through your node. That is because the transaction you are trying to double spend is in your node's mempool and in the wallet, so it will reject the double spend as invalid.

I can make you an unsigned double spend transaction which you can sign and then give back to me which I can then broadcast to the network for you.

Edit:
Below is the unsigned transaction. It pays a fee of 318880 satoshis which I deducted from the second output of your original transaction (0.01000001 BTC being sent to 129Q8uADs9BpwDnFDJZnHYYuaxuu3NiKZh is now 0.00691121 BTC sent to that address). If you want the fee to be deducted from the other output, please let me know. Otherwise, the below hex string is your raw transaction.

Code:

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

To sign this transaction, run the following command in the terminal with bitcoind running:

Code:

bitcoin-cli signrawtransaction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

Once you have done that, please post the entire output of that command here and I will broadcast the transaction for you.

OK.
What need make after this command?

Thanks!

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Any double spend transaction that you make will not be able to be broadcast through your node. That is because the transaction you are trying to double spend is in your node's mempool and in the wallet, so it will reject the double spend as invalid.

I can make you an unsigned double spend transaction which you can sign and then give back to me which I can then broadcast to the network for you.

Edit:
Below is the unsigned transaction. It pays a fee of 318880 satoshis which I deducted from the second output of your original transaction (0.01000001 BTC being sent to 129Q8uADs9BpwDnFDJZnHYYuaxuu3NiKZh is now 0.00691121 BTC sent to that address). If you want the fee to be deducted from the other output, please let me know. Otherwise, the below hex string is your raw transaction.

Code:

010000000D2F0875968A5328C7CD4D88424DAB12038F8BD54411B72F03855F821E5A94D3770000000000FEFFFFFFF89B303092D5EA7FA8339C19AA57D97EA01EC908520EF7DD7AFDFC9D1DD25DE60000000000FEFFFFFF417B95F119EE5F5D963EB6C1A45FF821FD2175D7A852C62F41A3FABC30C3A3E30100000000FEFFFFFFBAD6B820012DA748AE973171A46A411FCAC5CBF525B55D8C25F5737586630EAB0100000000FEFFFFFF98D2AF1D5A8AE2A1AD7706BCCFD546B9C2367050C2A4602672789E4114AC23660000000000FEFFFFFF3D7A6FEF70AC341F8573CD2AE0211BDB8384AE22C7AA634A69019410668880370100000000FEFFFFFF50CDC657B8E6EEC623B9E65B664F2BF1D8741E948ED525F0A65420D4D61A3A000000000000FEFFFFFFE62795073C233F93C3FCF773BE3DF751A53D047BFD7029AF56926742D518B68E0000000000FEFFFFFFB846DA9DC80076C544E4C0DBA2562332EF915F58AAD9A4CCAE6F5614A65CCD4E0100000000FEFFFFFF88872D972EA7B4E0E01FAF41B6DF2988D38E19B650B099D2BC385B468537EF080100000000FEFFFFFFFC728F5312F9D2498CA0CE848C569AB6F6065CDE6AC9CC5140F199D5A8A9FD590000000000FEFFFFFF4727876AB166C4BFCC5072563E486DF23F82F019DFD9F501BA839472B02BA2820100000000FEFFFFFFD557D1A0B16C55DF9B37EAFE878C8774B6D0F2581C488F08885D91DCAACA0FF00000000000FEFFFFFF02002D3101000000001976A914E55ED207A50E07903FA99F9265D076288DE55ACD88ACB18B0A00000000001976A9140C8EC43FF3BD358C4A0A113316246A181C174ADC88ACC1E20600

To sign this transaction, run the following command in the terminal with bitcoind running:

Code:

bitcoin-cli signrawtransaction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

Once you have done that, please post the entire output of that command here and I will broadcast the transaction for you.

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: readyrocky on February 08, 2017, 01:00:51 PM

Quote from: crazybtrade on February 07, 2017, 11:41:44 PM

Quote from: achow101 on February 07, 2017, 11:38:03 PM

Quote from: crazybtrade on February 07, 2017, 10:30:23 PM

I tried this, not helped.. because pruned mode.

what will try-reindex ?

Reindexing will not help and cannot be done with a pruned node as well. All you can do now is wait as you will not be able to create any double spending transaction. You can ask a miner for help, I linked to two of them who may be able to help you in an earlier post.

i contacted them, wait answer..

i can create double spending transaction but i don't know how make it..

Looking at the sequence number I think the tx is not replaceable by fee. Is important that the software you use sets the sequence number below 0xffffffff - 1. Then that txs can be double spent (when unconfirmed) and replace with higher fee for faster confirmation. You may need to adapt your software for that or use a bip125 compatible wallet.

How can make it?
Could you help me? I will pay reward
Thanks.

readyrocky

newbie

Activity: 15

Merit: 5

Quote from: crazybtrade on February 07, 2017, 11:41:44 PM

Quote from: achow101 on February 07, 2017, 11:38:03 PM

Quote from: crazybtrade on February 07, 2017, 10:30:23 PM

I tried this, not helped.. because pruned mode.

what will try-reindex ?

Reindexing will not help and cannot be done with a pruned node as well. All you can do now is wait as you will not be able to create any double spending transaction. You can ask a miner for help, I linked to two of them who may be able to help you in an earlier post.

i contacted them, wait answer..

i can create double spending transaction but i don't know how make it..

Looking at the sequence number I think the tx is not replaceable by fee. Is important that the software you use sets the sequence number below 0xffffffff - 1. Then that txs can be double spent (when unconfirmed) and replace with higher fee for faster confirmation. You may need to adapt your software for that or use a bip125 compatible wallet.

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 07, 2017, 11:38:03 PM

Quote from: crazybtrade on February 07, 2017, 10:30:23 PM

I tried this, not helped.. because pruned mode.

what will try-reindex ?

Reindexing will not help and cannot be done with a pruned node as well. All you can do now is wait as you will not be able to create any double spending transaction. You can ask a miner for help, I linked to two of them who may be able to help you in an earlier post.

i contacted them, wait answer..

i can create double spending transaction but i don't know how make it..

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Quote from: crazybtrade on February 07, 2017, 10:30:23 PM

I tried this, not helped.. because pruned mode.

what will try-reindex ?

Reindexing will not help and cannot be done with a pruned node as well. All you can do now is wait as you will not be able to create any double spending transaction. You can ask a miner for help, I linked to two of them who may be able to help you in an earlier post.

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 07, 2017, 10:22:29 PM

Quote from: crazybtrade on February 07, 2017, 10:11:01 PM

Yes, use bitcoin core bitcoind.

I can use command line.

I have not access to GUI.

yes, this txid inbuilt to wallet

Stop Bitcoind. Restart it with the -zapwallettxes option. Resend your transaction but include a higher transaction fee.

I tried this, not helped.. because pruned mode.

what will try-reindex ?

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Quote from: crazybtrade on February 07, 2017, 10:11:01 PM

Yes, use bitcoin core bitcoind.

I can use command line.

I have not access to GUI.

yes, this txid inbuilt to wallet

Stop Bitcoind. Restart it with the -zapwallettxes option. Resend your transaction but include a higher transaction fee.

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 07, 2017, 10:07:32 PM

So you are using a script to send Bitcoin but you have no idea what it does or how it works? I suspect you are going to quickly lose all of your money.

Are you using Bitcoin Core (I assume you are)?

Are you using the command line?

Do you have access to the GUI?

Is the transaction that you made made within Bitcoin Core's inbuilt wallet or something else completely separate and simply broadcast through Bitcoin Core?

Yes, use bitcoin core bitcoind.

I can use command line.

I have not access to GUI.

yes, this txid inbuilt to wallet

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

So you are using a script to send Bitcoin but you have no idea what it does or how it works? I suspect you are going to quickly lose all of your money.

Are you using Bitcoin Core (I assume you are)?

Are you using the command line?

Do you have access to the GUI?

Is the transaction that you made made within Bitcoin Core's inbuilt wallet or something else completely separate and simply broadcast through Bitcoin Core?

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 07, 2017, 09:18:17 PM

Quote from: crazybtrade on February 07, 2017, 08:21:01 PM

I don't use wallet.
I use blockchain node only. (use pruned mode, default fees 0.0001) and script send btc with 0.0001 fee for all tx.
I have real problem.. i want cancel this TX.
Or how can make double spend to another my wallet?

Thanks.

Then just remake the transaction but with a higher fee. Clearly you are doing things with raw txs, so set the fee to be higher and just remake the transaction.

Thanks,

but i'm not developer..

i have txid only. (if need i can write php script, but need code for it)

could you help me pls..? i will pay reward.

how make it?

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Quote from: crazybtrade on February 07, 2017, 08:21:01 PM

I don't use wallet.
I use blockchain node only. (use pruned mode, default fees 0.0001) and script send btc with 0.0001 fee for all tx.
I have real problem.. i want cancel this TX.
Or how can make double spend to another my wallet?

Thanks.

Then just remake the transaction but with a higher fee. Clearly you are doing things with raw txs, so set the fee to be higher and just remake the transaction.

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: achow101 on February 07, 2017, 01:23:41 PM

Quote from: crazybtrade on February 07, 2017, 04:45:31 AM

How think, can i cancel this tx ?

Bitcoin transactions are irreversible, you cannot cancel them or reverse the transaction.

You have a few options here. You can wait and hope it confirms, wait for the transaction to be "forgotten" by the network, attempt a double spending transaction that pays a higher fee, or ask a miner to confirm it for you.

For the third option, we need to know what wallet software you are using.

For the fourth option, you can contact the users Quickseller and macbook-air.

I don't use wallet.
I use blockchain node only. (use pruned mode, default fees 0.0001) and script send btc with 0.0001 fee for all tx.
I have real problem.. i want cancel this TX.
Or how can make double spend to another my wallet?

Thanks.

achow101

staff

Activity: 3458

Merit: 6793

Just writing some code

Quote from: crazybtrade on February 07, 2017, 04:45:31 AM

How think, can i cancel this tx ?

Bitcoin transactions are irreversible, you cannot cancel them or reverse the transaction.

You have a few options here. You can wait and hope it confirms, wait for the transaction to be "forgotten" by the network, attempt a double spending transaction that pays a higher fee, or ask a miner to confirm it for you.

For the third option, we need to know what wallet software you are using.

For the fourth option, you can contact the users Quickseller and macbook-air.

crazybtrade

sr. member

Activity: 420

Merit: 250

How think, can i cancel this tx ?

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: Jhanzo on February 07, 2017, 04:29:01 AM

Quote from: crazybtrade on February 07, 2017, 04:22:13 AM

Quote from: Jhanzo on February 07, 2017, 04:21:00 AM

Quote from: Avirunes on February 07, 2017, 04:12:01 AM

Or, you can use http://viabtc.com/tools/txaccelerator/ and push your transaction.

Quote from: Jhanzo on February 07, 2017, 04:04:16 AM

Quickseller or macbook-air to push your tx to F2pool. Pretty sure a 2KB tx is going to cost some mBTCs.

Any idea how they do it? or is it like F2pool has also some tool just like viabtc?

That tx won't work with viabtc because it have less than 0.0001/KB fee.

From what I know, F2pool have a page just like the accelerator, but you'll need a ref code to use it. Those users have the ref code.

Yes, viabtc not work..

F2pool https://www.f2pool.com/pushtx
need ref code..

Where can get this code?

You'll have to contact macbook-air for that. He owns the place.
BUT

Quote from: macbook-air on January 15, 2015, 10:55:49 PM

We no longer send out codes to individuals atm...

If you only want the tx to confirm, just ask them to push it for you.

ok. i PM..
wait answer.
thanks.

Jhanzo

hero member

Activity: 798

Merit: 506

Thank satoshi

Quote from: crazybtrade on February 07, 2017, 04:22:13 AM

Quote from: Jhanzo on February 07, 2017, 04:21:00 AM

Quote from: Avirunes on February 07, 2017, 04:12:01 AM

Or, you can use http://viabtc.com/tools/txaccelerator/ and push your transaction.

Quote from: Jhanzo on February 07, 2017, 04:04:16 AM

Quickseller or macbook-air to push your tx to F2pool. Pretty sure a 2KB tx is going to cost some mBTCs.

Any idea how they do it? or is it like F2pool has also some tool just like viabtc?

That tx won't work with viabtc because it have less than 0.0001/KB fee.

From what I know, F2pool have a page just like the accelerator, but you'll need a ref code to use it. Those users have the ref code.

Yes, viabtc not work..

F2pool https://www.f2pool.com/pushtx
need ref code..

Where can get this code?

You'll have to contact macbook-air for that. He owns the place.
BUT

Quote from: macbook-air on January 15, 2015, 10:55:49 PM

We no longer send out codes to individuals atm...

If you only want the tx to confirm, just ask them to push it for you.

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: Jhanzo on February 07, 2017, 04:21:00 AM

Quote from: Avirunes on February 07, 2017, 04:12:01 AM

Or, you can use http://viabtc.com/tools/txaccelerator/ and push your transaction.

Quote from: Jhanzo on February 07, 2017, 04:04:16 AM

Quickseller or macbook-air to push your tx to F2pool. Pretty sure a 2KB tx is going to cost some mBTCs.

Any idea how they do it? or is it like F2pool has also some tool just like viabtc?

That tx won't work with viabtc because it have less than 0.0001/KB fee.

From what I know, F2pool have a page just like the accelerator, but you'll need a ref code to use it. Those users have the ref code.

Yes, viabtc not work..

F2pool https://www.f2pool.com/pushtx
need ref code..

Where can get this code?

Jhanzo

hero member

Activity: 798

Merit: 506

Thank satoshi

Quote from: Avirunes on February 07, 2017, 04:12:01 AM

Or, you can use http://viabtc.com/tools/txaccelerator/ and push your transaction.

Quote from: Jhanzo on February 07, 2017, 04:04:16 AM

Quickseller or macbook-air to push your tx to F2pool. Pretty sure a 2KB tx is going to cost some mBTCs.

Any idea how they do it? or is it like F2pool has also some tool just like viabtc?

That tx won't work with viabtc because it have less than 0.0001/KB fee.

From what I know, F2pool have a page just like the accelerator, but you'll need a ref code to use it. Those users have the ref code.

Edit:
https://www.f2pool.com/pushtx
I would've asked (paid even) for the ref a long time ago but that page is inaccessible to me all the time. This is actually the first time I am able to access it.

Avirunes

legendary

Activity: 3094

Merit: 1472

Or, you can use http://viabtc.com/tools/txaccelerator/ and push your transaction.

Quote from: Jhanzo on February 07, 2017, 04:04:16 AM

Quickseller or macbook-air to push your tx to F2pool. Pretty sure a 2KB tx is going to cost some mBTCs.

Any idea how they do it? or is it like F2pool has also some tool just like viabtc?

crazybtrade

sr. member

Activity: 420

Merit: 250

Quote from: Jhanzo on February 07, 2017, 04:04:16 AM

That tx is using 0.0001BTC for 2KB transaction. That's waaaaay too low.

You can wait 72 hours for the network to drop the tx. Then you should be able to create another transaction with higher fees.
Or you can ask Quickseller or macbook-air to push your tx to F2pool. Pretty sure a 2KB tx is going to cost some mBTCs.

yes, 0.0001btc too low.. i don't know about it.

i will try contact with Quickseller or macbook-air (last visit 8 day ago).

Thanks

Jhanzo

hero member

Activity: 798

Merit: 506

Thank satoshi

That tx is using 0.0001BTC for 2KB transaction. That's waaaaay too low.

You can wait 72 hours for the network to drop the tx. Then you should be able to create another transaction with higher fees.
Or you can ask Quickseller or macbook-air to push your tx to F2pool. Pretty sure a 2KB tx is going to cost some mBTCs.

crazybtrade

sr. member

Activity: 420

Merit: 250

Hello friends,

need help..

I sent btc and tx not confirmed long time..

my txid 7b41cec5e2db41aed6985e6d3f7cdacf6f60431ebe383ba09e096cc82f5e67a4

How can help me? I will pay reward

Thanks to all

Topic: tx not confirmed long time.. (Read 2998 times)