Author

Topic: Unable to access AntMiner (Read 1308 times)

legendary
Activity: 1078
Merit: 1024
August 28, 2016, 12:55:24 PM
#6
Should be 192.168.1.99 after a reset like other people mentioned.
You can also access your router to see what's connected to it and get the dynamic IP your miner is currently connected to.
legendary
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
August 24, 2016, 06:09:10 PM
#5
See the location for Antminer S3's reset button from the picture below.
You will need a small item: paper clip or a needle for example to press it.


The following quote is from dogie's setup thread https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s3-setup-hd-702653
How do I reset settings to default?

- Use a paper clip to press the reset button - located next to the ethernet connector - down for
5-10 seconds. The miner will then reset with stock settings.
hero member
Activity: 2492
Merit: 621
August 24, 2016, 05:14:21 PM
#4
Reset button on the front will set it back to standard settings and standard IP address (192.168.1.99 I think). The ln you can start the setup again.
newbie
Activity: 2
Merit: 0
August 24, 2016, 04:32:08 PM
#3
AntMiner S3+
legendary
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
August 24, 2016, 03:32:19 PM
#2
I don't know which Antminer you are talking about, but see the manual for resetting the miner by using the reset button.

See Antminer S7 manual for example: https://bitmaintech.com/files/download/Antminer%20S7%20user%20guide.pdf
Chapter 7.4.

Manuals for every Antminer model can be found from Bitmain's site:
https://bitmaintech.com/support.htm
newbie
Activity: 2
Merit: 0
August 24, 2016, 03:23:20 PM
#1
We accidentally changed the LAN IP to static and we should have changed the WAN IP to make the AntMiner have a static IP within our network.

Now we cannot access the AntMiner.  Angry

Any help would be greatly appreciated.

L
Jump to: