I mean I pull up GPU-Z and it is still at 2200 MHZ, even with 2300 in the bios in both place under "Memory" and "PowerPlay". The memory strap stops at 2250. I doubt it. I am sure that memory straps stop there on Samsung memory as well. but could be wrong. have not checked this yet. Could that be the issue?
https://i.imgur.com/P0IOgrH.gif
Topic: Unable to mod memory clock bios above 2200 on Hynix XFX or Gigabyte card. (Read 372 times)
September 07, 2017, 12:34:45 PM
September 07, 2017, 12:21:56 PM
Brand: Gigabyte and XFX
Model: GIGABYTE AORUS Radeon RX 580 8Gb and XFX Radeon RX 580 8Gb
Memory size: 8 GB
Memory manufacturer: Hynix
Custom settings: Strap that I am using to mod both bios's in the following slots: 2:1750,2: 2000, 2:2250
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
Funny enough I googled this strap and i think it is is an original strap from Micron memory. i think it was the 2:1750 original.
Sidenotes: I saw that some individuals can get there memory clock to 2300 megahertz. These two gpus's will not go above 2200. I have modified both the "PowerPlay" and "Memory" section of the Polaris Bios Editor with 2300 at the max frequency(PowerPlay) and third frequency under memory with 2300 but still nothing.
Is this a hynix thing or am i doing something wrong. The two individuals I saw doing this had Samsung memory.
One post showing the 2300 mem clock: https://forum.ethereum.org/discussion/12529/msi-rx580-8g-28mh-without-bios-mod
Any input is appreciated.
Model: GIGABYTE AORUS Radeon RX 580 8Gb and XFX Radeon RX 580 8Gb
Memory size: 8 GB
Memory manufacturer: Hynix
Custom settings: Strap that I am using to mod both bios's in the following slots: 2:1750,2: 2000, 2:2250
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
Funny enough I googled this strap and i think it is is an original strap from Micron memory. i think it was the 2:1750 original.
Sidenotes: I saw that some individuals can get there memory clock to 2300 megahertz. These two gpus's will not go above 2200. I have modified both the "PowerPlay" and "Memory" section of the Polaris Bios Editor with 2300 at the max frequency(PowerPlay) and third frequency under memory with 2300 but still nothing.
Is this a hynix thing or am i doing something wrong. The two individuals I saw doing this had Samsung memory.
One post showing the 2300 mem clock: https://forum.ethereum.org/discussion/12529/msi-rx580-8g-28mh-without-bios-mod
Any input is appreciated.
Jump to: