Create a convector miner.
To keep warm, to be quiet around and at the same time earn money
Power 450-500 W
For the month:
consumption = 360 kW * hour
income = $ 30
Topic: Unlock PCB TEMP on minerStatus , for S9 (Read 331 times)
im using braiins fw it was fine with voltage control but the only problem was fan control. miner always run at 81c to 82c . they set lower auto fan. maybe i do something with cgminer for fan control. but i don't have plan to buy more asics in future so thats cause laziness 
good luck for your efforts
good luck for your efforts
I worked a lot on top of it ... and burn an S9 controller for that: who pays for it? In my principle nothing is free in life, I already made a version including all my mod (fan control, pcb temp, freq control even on auto firmware, control voltage by 5mv, and Asicboost) that can update via the minor easily, but free, I have integrated a note of donation on btc for those who want, but in reality I do not believe in this world there are no gifts ... I'm looking a way to include a small 1% fee in my firmware, I probably would not succeed first and I probably would not win anything but it's my fasson to see, I'm a little in this world, only some minor, and I do not have the means to turn them, so I try to get away with it as best I can:... 
if a perssonne wants to help me integrate it (even in soft so easily removable) I am a taker
and with pleasure that I share it with you! 
Have you good! you can turn with no fee, and I'm interested in that!
if a perssonne wants to help me integrate it (even in soft so easily removable) I am a taker
and with pleasure that I share it with you! Have you good! you can turn with no fee, and I'm interested in that!
did you compile 1102 LPM bmminer with 895mv and different volts? if did then share it please
Oh yes, I had forgotten this details! original fan are on 3 and 6, but with LPM it is on fan 5 and 6 ... the constant is Fan 6 ...
In reality (Intake) and (Outake) means nothing, because if you reverse the plug of the fan it does not make sense;) but it is only a reference, I recognize that is not a big deal lol thing
I uploaded with the error corrected in the first post
In reality (Intake) and (Outake) means nothing, because if you reverse the plug of the fan it does not make sense;) but it is only a reference, I recognize that is not a big deal lol thing
I uploaded with the error corrected in the first post
not sure which one fan but for temperatures its good mod
S9 13.5t
LPM 1102
https://preview.ibb.co/kjw0nf/s9.jpg
but for temperatures its good mod S9 13.5t
LPM 1102
https://preview.ibb.co/kjw0nf/s9.jpg
Hi ! I have the pleasure to share my little mod for the status of the miner!
You will find the temperature of the card on: "PCB Temp" previously empty on Temp (chip 1)
I also perssonaliser Fan 3 and fan 6 in "Intake and Outake) to find you!
it is not much, but I think it can help a lot of people, especially if you have changed the bmminer and your chip times are incorrect! the temp pcb it is constant and therefore will serve as a reference!
be sure to find the file here: http://www.k-upload.fr/afficher-fichier-2018-11-04-1faaf74daminerstatus.cgi.html
All you have to do is go to "/ www / pages / cgi-bin" and replace "minerStatus.cgi" with my file;)
do not forget to rename the "minerStatus.cgi" in "minerStatus-old.cgi" in case of problem you can restore it! but there is no reason! and in the worst case you can always restore an original firmware!
With pleasure!
You will find the temperature of the card on: "PCB Temp" previously empty on Temp (chip 1)
I also perssonaliser Fan 3 and fan 6 in "Intake and Outake) to find you!
it is not much, but I think it can help a lot of people, especially if you have changed the bmminer and your chip times are incorrect! the temp pcb it is constant and therefore will serve as a reference!
be sure to find the file here: http://www.k-upload.fr/afficher-fichier-2018-11-04-1faaf74daminerstatus.cgi.html
All you have to do is go to "/ www / pages / cgi-bin" and replace "minerStatus.cgi" with my file;)
do not forget to rename the "minerStatus.cgi" in "minerStatus-old.cgi" in case of problem you can restore it! but there is no reason! and in the worst case you can always restore an original firmware!
With pleasure!
Jump to: