Topic: Unresponsive Asicminer Blade V2 - Green PCB (Read 491 times)
I'm having a similar problem except my blade is supposedly brand new, Orange light solid and green light flashes and no hashing of any kind. Hopefully someone will pipe in with some exclusive knowledge.
I've recently been having problems with one of my blades, description in title, where it just won't respond.
-The green light on the ethernet flashes at a steady interval, while the orange is solid.
-When I jump the factory reset pins, the ethernet port lights go off and the status light flashes rapidly, then goes back to normal. Everything seems normal right? Wrong. When I configure the blade, I set it to 192.168.1.252:8000, with my other 2 blades on 250 and 251. It won't respond there. After the reset, I tried it on 254 and still nothing.
Sorry for the WoT, but does anyone know what might be going on here? Again, this is only a recent (last 5 days) problem.
Thank you
-Vl4dim1r
-The green light on the ethernet flashes at a steady interval, while the orange is solid.
-When I jump the factory reset pins, the ethernet port lights go off and the status light flashes rapidly, then goes back to normal. Everything seems normal right? Wrong. When I configure the blade, I set it to 192.168.1.252:8000, with my other 2 blades on 250 and 251. It won't respond there. After the reset, I tried it on 254 and still nothing.
Sorry for the WoT, but does anyone know what might be going on here? Again, this is only a recent (last 5 days) problem.
Thank you
-Vl4dim1r
Jump to: