Update Ledger Nano S without the 24 words is possible?

Lucius

legendary

Activity: 3234

Merit: 5637

Blackjack.fun-Free Raffle-Join&Win $50🎲

Quote from: LeGaulois on May 17, 2018, 12:00:52 PM

Thank you very much

So I tried first but it didn't work, it showed the message "recovery" but then got the same message that in my previous post. I then tried again, it showed the message "bootloader" and then it updated the firmware alone. I needed to reinstall the app as well. The wallet is back to what it was.

Thanks for the help guys

You're welcome, I'm glad you managed to solve the problem. Ledger is make firmware update from 1.3 to 1.4.1 fairly problematic for most users, but from 1.4.1 to 1.4.2 it was pretty easy and without complications. With latest firmware Ledger say that error with outdated/not genuine MCU is fixed, so in next update users should not have such problems.

LeGaulois

copper member

Activity: 2940

Merit: 4101

Top Crypto Casino

Thank you very much

So I tried first but it didn't work, it showed the message "recovery" but then got the same message that in my previous post. I then tried again, it showed the message "bootloader" and then it updated the firmware alone. I needed to reinstall the app as well. The wallet is back to what it was.

Thanks for the help guys

Lucius

legendary

Activity: 3234

Merit: 5637

Blackjack.fun-Free Raffle-Join&Win $50🎲

Quote from: LeGaulois on May 17, 2018, 05:39:18 AM

Thanks guys

Now when I start the device, I have the message:
!MCU firmware is outdated

and then when I press the 2 buttons I have the message:
The device MCU must be updated using the Ledger Nano App. Press and hold 5sec.

After I do I have the message:
The button close to the USB when you plug in. Update is mandatory. Press button to restart.

But when I press the button it shows me again:
!MCU firmware is outdated

I moved the coins to another wallet before trying to update. When I used the wallet for the first time I wrote down the 24 words of course. But I gave them to my father to be "safe". My father passed away 2 weeks ago and I don't know where he puts them

Quote from: ?? on ??

Did you successfully test out your 24 word phrase?

In the first post, I said I don't know where are the 24 words....

When you get this error you should unplug your Ledger Nano S and close Ledger Manager. Then hold down the button closest to the USB port and plug in Ledger in USB slot, but still hold that button. After that start Ledger Manager again, this should solve this step.

You also may stuck on Update screen after that, so go to your Device Manager on PC and find Human Interface Devices - USB Input Device. If there is any yellow marked USB device just remove it. Unplug Ledger/close Ledger Manager and try again.

I'm sorry for your loss.

bitmover

legendary

Activity: 2352

Merit: 6089

bitcoindata.science

Quote from: LeGaulois on May 17, 2018, 05:39:18 AM

I moved the coins to another wallet before trying to update.

Are your coins out of the nano then?

So try to reset your wallet now.
Insert the wrong pin3 times and the nano will reset.

Now it will update without the seed, probably.

Check on all update steps if there is anything on Ledger's led panel asking you to click a button.

LeGaulois

copper member

Activity: 2940

Merit: 4101

Top Crypto Casino

Thanks guys

Now when I start the device, I have the message:
!MCU firmware is outdated

and then when I press the 2 buttons I have the message:
The device MCU must be updated using the Ledger Nano App. Press and hold 5sec.

After I do I have the message:
The button close to the USB when you plug in. Update is mandatory. Press button to restart.

But when I press the button it shows me again:
!MCU firmware is outdated

I moved the coins to another wallet before trying to update. When I used the wallet for the first time I wrote down the 24 words of course. But I gave them to my father to be "safe". My father passed away 2 weeks ago and I don't know where he puts them

Quote from: ?? on ??

Did you successfully test out your 24 word phrase?

In the first post, I said I don't know where are the 24 words....

bitmover

legendary

Activity: 2352

Merit: 6089

bitcoindata.science

Quote from: bob123 on May 17, 2018, 04:14:01 AM

Are you still able to access your wallet? What kind of an error message did you get? Or is it stuck in a loop?
If you still can access your coins, i would suggest you do send them to another (temporary) wallet until you have initialised your nano s again.

This is the best solution.
-Transfer all your funds from all your coins to another wallet.
+Reset your nano,
-Update it
-creatr new wallet and save the new seed
- for additional security:reset your nano and restore from the seed: check if address is the same
-transfer your coins to this new nano wallet

bob123

legendary

Activity: 1624

Merit: 2481

Quote from: LeGaulois on May 17, 2018, 02:48:17 AM

After reading, I see that I need the 24 words to be able to update it?

If the update works without an issue, no.
It may only be necessary to reset your device if the update fails (e.g. got stuck).
Edit: And if you are updating to 1.3, like Lucius already mentioned.

Quote from: LeGaulois on May 17, 2018, 02:48:17 AM

The reason is that I am not sure yet where are the 24 words :/

Are you still able to access your wallet? What kind of an error message did you get? Or is it stuck in a loop?
If you still can access your coins, i would suggest you do send them to another (temporary) wallet until you have initialised your nano s again.

Or if you don't want to do that, you could try to restore some 24-word-seeds you can find around your place in an offline environment to check whether they match your nano s seed/addresses.

Lucius

legendary

Activity: 3234

Merit: 5637

Blackjack.fun-Free Raffle-Join&Win $50🎲

Quote from: LeGaulois on May 17, 2018, 02:48:17 AM

Sorry if the question is dumb

I am trying to update the firmware today (I didn't update after the release in March also) So I installed the Ledger manager and clicked on the update but got an error message. After reading, I see that I need the 24 words to be able to update it?

Is there a way to update without it that I am not aware. The reason is that I am not sure yet where are the 24 words :/

You should always have your seed, this is most important thing of any wallet, so do not update your device before you find seed. Ledger is say that if your firmware is older then version 1.3 you will need seed after update to restore your wallets. So check your firmware version : Settings > Device > Firmware.

What error you get when you try to start firmware update?

LeGaulois

copper member

Activity: 2940

Merit: 4101

Top Crypto Casino

Sorry if the question is dumb

I am trying to update the firmware today (I didn't update after the release in March also) So I installed the Ledger manager and clicked on the update but got an error message. After reading, I see that I need the 24 words to be able to update it?

Is there a way to update without it that I am not aware. The reason is that I am not sure yet where are the 24 words :/

Topic: Update Ledger Nano S without the 24 words is possible? (Read 134 times)