Topic: Update: testing differen pools with My three 90M scryptminers from JTMiner (Read 2827 times)

My internet connection is 25M download, 5M upload. Bandwith requirement for mining is very minimal and should not be a problem for US miners. Here is a little more details:
http://bitcoin.stackexchange.com/questions/360/what-are-the-bandwidth-requirements-of-a-mining-rig

Im interested to know what your internet connections are like? whats the bandwidth per unit?

Thanks for your support！

--- update on 06-12-2014: testing multicoin pools ---

Last 24 hours

wafflepool: 0.20 BTC
CleverMining: 0.18 BTC
f2pool: 7.5 LTC ~0.13BTC


--- update on 06-11-2014: testing multicoin pools ---

the miner in Coinotron pool --> wafflepool
miner1 in f2pool --> Cleverming
miner2 in f2pool stay

 I will up date my result later.

Coinotron and f2pool has almost exact profit based on my payout during my hosting in JTMiner. I prefer f2pool for the graphic hashrate display.

Here is a screenshot this morning for my 2 miners in f2pool. Average hashrate around 88-89M, most time above 85M, very stable:
https://i.imgur.com/NPuQLIz.png


---original post on 06-10-2014 ---
After careful comparison, I decided to buy three 90M A2 terminator from JT Miner 2 weeks ago.  

Because I was out of town after my payment, JT Miner kindly hosted my 3 a2 terminators until I came back with a daily hosting fee of $4 for each miner, very nice and sweet deal. So they set the miners running for me once they confirmed my payment on May 28th and I got 328 litecoin in total during my vacation.

I was back last weekend and they shipped my miners to me yesterday (June 9th, Monday) using overnight service so that I got it this morning. to my surprise, it is unbelievably easy to setup the miner:

unpack → plug in ethernet and power cable → switch on → bingo! my 3 goose starting laying coins. → go to web UI for miner config and realtime running status  → go to pool web site to check the actual coin my goose laid

That’s all I did. Now 3 goose are laying litecoin for me cheerfully, roughly 1 litercoin per hour right now.

Overall impression: very stable, speed fluctuated around 88-89MHS, pool reject rate between 0.18% and 0.4%, power consumption around 830W. Very good and I am very satisfied with it.

Please note that general US household has most of lighting circuit line with 15A, so I have to put the my 3 miners to 3 separate lines.

Let’s see some photos:

Three 90M A2 terminator
https://i.imgur.com/8sRLIIh.png

Network cable
https://i.imgur.com/t5NVbRo.jpg?3

Power consumption of one Miner  https://i.imgur.com/o18t1pP.png?2

WebUI of miner 1, mining in coinotron pool https://i.imgur.com/J3pKNTF.png

Realtime status: red circle is average speed and rejected number, rejected rate is 112/54164 = 0.21%, excellent.
https://i.imgur.com/Peupex7.png?1

Yesterday ( Jun 9th) 11:00,miner offline for shipping, f2pool 24hr speed map, very stable.
https://i.imgur.com/LXCROkS.png

Total revenue for 2 miners from f2pool is 218 during my vacation
https://i.imgur.com/0ocXEzf.png

One miner in Coinotron
https://i.imgur.com/qySL1f1.png

Total payout from coinotron is 107.51, balance is 2.05, so total revenue before yesterday 11am is about 327.95
https://i.imgur.com/qA2D8cX.png

I like f2pool which show me the hash rate for last 24hr from pool side. Below are 2 miners in f2pool which are mining from around 11:30 am today.
https://i.imgur.com/2mGNQEd.png

My two goose in f2pool laid 225-218.39= 6.63 litecoin in around 10hrs today
https://i.imgur.com/O7lP5mO.png

This is my brief review of my three 90M A2 terminator from JTMiner and I would keep it update when I get more familiar with them. Good to know that the litecoin mining total hashrate dropped from 350G yesterday to 290G now.