USB Erupter problem (Possible DOA) | Bitcointalksearch.org

vm1990

legendary

Activity: 1540

Merit: 1002

Quote from: crhys on September 04, 2013, 11:01:31 AM

Hi Guys/Girls,

I received my latest batch of USB Erupters and one is not working, tried it on several machines (Raspberry-Pi, Mac and Windows PC) but it appears dead.

The Silicon Labs Uart – usb adapter chip (IC2 (closest to the usb port on the RHS)) instantly gets hot (very hot) once its plugged in.

Is this a known problem, is it just dead or can I revive it somehow ?

Thanks

Rhys

take some pics. to me its sounds like a bad solder or resistor.

OgreOwner

newbie

Activity: 3

Merit: 0

I have 2 USB Sapphire Block Eruptors REV 3.00 that I got off of Ebay, both with a nice little hole in the lower left of IC2.

IC2 is the SCILabs USB to UART chip. I downloaded the software from SCILabs verified that the programming is not locked on either of the two other working Miners that I have, ordered 2 chips from Mouser and am now trying to determine if I need to hire someone to do the soldering to replace them or if I can develop the soldering skills to replace them. The only hitch at the moment is the 28 pin surface mount package. If you are stumped and want to be rid of yours, I will be happy to add it to the two that I am working on, or perhaps my research will be helpful to you.

Karl

ssateneth

legendary

Activity: 1344

Merit: 1004

Dead. There is no warranty from friedcat. If you bought from a reseller, try them for a warranty replacement if they even offer warranty replacements. They do, after all, get a free USB miner for every 50 they order.

crhys

member

Activity: 109

Merit: 10

Bitcoin Foundation Member

Hi Guys/Girls,

I received my latest batch of USB Erupters and one is not working, tried it on several machines (Raspberry-Pi, Mac and Windows PC) but it appears dead.

The Silicon Labs Uart – usb adapter chip (IC2 (closest to the usb port on the RHS)) instantly gets hot (very hot) once its plugged in.

Is this a known problem, is it just dead or can I revive it somehow ?

Thanks

Rhys

Topic: USB Erupter problem (Possible DOA) (Read 1093 times)