That means, the power supply is not enough for one of your USB miners.
Generally a USB port provides 500mA, and USBminer needs 500~580mA to work.
A usb hub with power supply is required or you may try to connect the LED-always-green USB miner to another USB port of your PC instead.
Topic: USB erupters for "fun" (Read 484 times)
Also buy a rPi for lesser power consumption. And if you don't want to buy a rPi you can always use an intelligent router. With DDWRT and it will mine for you. Enjoy!
PS. If you want to earn you can check cex. look at my sig. You can buy and sell GHs and earn while holding them or sell when it's higher than your purchase price.
PS. If you want to earn you can check cex. look at my sig. You can buy and sell GHs and earn while holding them or sell when it's higher than your purchase price.
USB Erupters ;
If the green light stays on, they are not mining.
If the green light goes off , flashes randomly, they're mining.
Get yourself a powered usb hub. They say the erupters use 2.5watts. So make sure your hub is able to supply that. (voltage_out_put_of_the_hub * amps_output_of_the_hub) / 2.5amps = the number of erupters you can run.
If the green light stays on, they are not mining.
If the green light goes off , flashes randomly, they're mining.
Get yourself a powered usb hub. They say the erupters use 2.5watts. So make sure your hub is able to supply that. (voltage_out_put_of_the_hub * amps_output_of_the_hub) / 2.5amps = the number of erupters you can run.
Hey all-
I ordered two ASICminers Erupters to play with (I know I am losing money but I don't care) and am using Asteroid. I've got one of them running just fine, but the other is not doing anything. The LED will flash every now and then but the system is reading ~335.8MH/s. Any ideas? I was enjoying learning about this the hard way but its starting to aggravate me.
Anyone?
I'm on a 2010 MacBookPro using the latest Asteroid miner.
Edit- They both mine ~335mh/s when plugged in one at a time.
-Ben
I ordered two ASICminers Erupters to play with (I know I am losing money but I don't care) and am using Asteroid. I've got one of them running just fine, but the other is not doing anything. The LED will flash every now and then but the system is reading ~335.8MH/s. Any ideas? I was enjoying learning about this the hard way but its starting to aggravate me.
Anyone?
I'm on a 2010 MacBookPro using the latest Asteroid miner.
Edit- They both mine ~335mh/s when plugged in one at a time.
-Ben
Jump to: