The convenient solution would be probably to buy wifi sd cards for the camera.
An alternative is to go with the usb hubs and have a raspberry pi + wlan adapter with each hub to transfer them to your main machine. That's cheaper but probably requires more work.
Topic: USB info for 60 Camera Photogrammetry rig (Read 861 times)
Hi guys, so I have a bit of a technical question and I thought to myself where is there a lot of people that a VERY computer/network savy and can come up with unique/custom solutions and bam I thought of all our smart mining brothers. Seeing as this isn't about mining or BTC at all really I figured this was about the only place I could post this without being lol, off topic!
I am in the process of setting up a 60 camera Photogrammetry rig for my new business. All of my camera's have a USB port on them so they can be connected to a PC so we can retrieve the RAW data from them. Cams are mounted on Tripods around my studio and I need to find a way to connect all 60 cams back to my PC via USB otherwise I have to pull all 60 sd cards and pull the data off them that way (which obviously will be a huge pita and extremely time consuming).
Basically I have 10 tripods with 6 cams per pod so I was thinking of mounting a 6 or 8 port USB hub on each pod, but how the hell do I get that hub cable back to my PC. The furtherest pod is around 40' from my PC (cable length, considering I would have to go up to the ceiling and over and back down to the PC as I can't have cables on the floor because of trip hazard for the clients).
As a start up we have spent a lot of our budget already on just the cams, mounts, tripods etc so cost is a pretty big consideration.
Any help you guys can offer is greatly appreciated.
I am in the process of setting up a 60 camera Photogrammetry rig for my new business. All of my camera's have a USB port on them so they can be connected to a PC so we can retrieve the RAW data from them. Cams are mounted on Tripods around my studio and I need to find a way to connect all 60 cams back to my PC via USB otherwise I have to pull all 60 sd cards and pull the data off them that way (which obviously will be a huge pita and extremely time consuming).
Basically I have 10 tripods with 6 cams per pod so I was thinking of mounting a 6 or 8 port USB hub on each pod, but how the hell do I get that hub cable back to my PC. The furtherest pod is around 40' from my PC (cable length, considering I would have to go up to the ceiling and over and back down to the PC as I can't have cables on the floor because of trip hazard for the clients).
As a start up we have spent a lot of our budget already on just the cams, mounts, tripods etc so cost is a pretty big consideration.
Any help you guys can offer is greatly appreciated.
Jump to: