Looks like we have a winner. I will be shocked if there is a better deal. Thank you sir.
You should be able to run 8 Erupters with it:
http://www.rosewill.com/products/1543/ProductDetail_Specifications.htm
Topic: USB miners (Read 2720 times)
You should be able to run 8 Erupters with it:
http://www.rosewill.com/products/1543/ProductDetail_Specifications.htm
can i run the usb eruptor direct from computer usb?
would x6400 interfere with usb block eruptor
in addition i also problem setting up on cgminer.
using 3.1.1 or 3.2
or can i run all via mpbm?
running on windows 7 x32
would x6400 interfere with usb block eruptor
in addition i also problem setting up on cgminer.
using 3.1.1 or 3.2
or can i run all via mpbm?
running on windows 7 x32
Are you sure? Dont want it if I can run only 8. I would like something that can run 10-20.
i just plugged one of my minners in and it is currently running at 672MH/s 
yeah it only looks like that. you need to let it settle in for a while and you'll see your true hashrate. it should average out between 320 - 340MH/s 
i just plugged one of my minners in and it is currently running at 672MH/s
Did you use the settings Kano tested with CGMiner?
i just plugged one of my minners in and it is currently running at 672MH/s
That anker does look nicer but its more than double the price. Gonna have to check out that roswill first.
i purchased 2 of these http://www.amazon.com/dp/B003Z4G3I6/ref=pe_309540_26725410_item and ran 5 on each (2 on one side, 1 on other side, 2 on top). worked great, good spacing for heat disbursement. if you are trying to run all them off 1 hub then i dont know where to direct you.
Here is some more information
https://bitcointalksearch.org/topic/m.2315631
Also try posting in the CGMiner thread.
https://bitcointalksearch.org/topic/m.2315631
Also try posting in the CGMiner thread.
This link show's Kano's settings to get his working.
Also start with just one device until you get it working and then start adding more, one at a time.
Not a good sign if paint is melting off the heatsink. Start with the simplest configuration and get it working, then start adding complexity.
https://bitcointalksearch.org/topic/m.2129115
Also start with just one device until you get it working and then start adding more, one at a time.
Not a good sign if paint is melting off the heatsink. Start with the simplest configuration and get it working, then start adding complexity.
https://bitcointalksearch.org/topic/m.2129115
That anker does look nicer but its more than double the price. Gonna have to check out that roswill first.
Looks like we have a winner. I will be shocked if there is a better deal. Thank you sir.
LOL Rosewill is Newegg's in-house brand, and Amazon sells Newegg's USB hubs cheaper than Newegg does? That's crazy.Ya Newegg is my first place I look, with Amazon second. I hardly ever buy computer stuff off ebay, unless I can't find it elsewhere.
http://www.amazon.com/Anker%C2%AE-Uspeed-10-Port-Adapter-Aluminum/dp/B007ZWFKX8/ref=sr_1_sc_2?s=electronics&ie=UTF8&qid=1369897324&sr=1-2-spell&keywords=ankor+usb
these hubs have been tried and tested to support 9-10 USB sticks - 3.0 12v
these hubs have been tried and tested to support 9-10 USB sticks - 3.0 12v
Looks like we have a winner. I will be shocked if there is a better deal. Thank you sir.
Hmmm, now that looks like a good one. Good ports per dollar. I havent even looked at newegg yet. Hooked on ebay.
Need more ports. USB 3.0 would be nice too. Im looking at these......
http://www.ebay.com/itm/200887456487?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.com/itm/400498700238?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.com/itm/260903554394?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.amazon.com/Charging-iPhones-iPods-Other-Devices/dp/B006Z8G99M/ref=sr_1_2?ie=UTF8&qid=1369894226&sr=8-2&keywords=Cambrionix
http://www.ebay.com/itm/200887456487?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.com/itm/400498700238?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.com/itm/260903554394?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.amazon.com/Charging-iPhones-iPods-Other-Devices/dp/B006Z8G99M/ref=sr_1_2?ie=UTF8&qid=1369894226&sr=8-2&keywords=Cambrionix
If you guys know a good USB hub please post link.
http://www.newegg.com/Product/Product.aspx?Item=17-111-402
If you guys know a good USB hub please post link.
IIRC, Kano said that these can act really funky if they get too hot while mining. I'm assuming yours are the ones without the heatsinks? Get a few packs of these, and throw 1 or 2 or whatever you can fit on the back of each board: http://www.newegg.com/Product/Product.aspx?Item=N82E16835708009
Then blow your fans in a directed path at all the heatsinks, and see if your HW errors go down.
Then blow your fans in a directed path at all the heatsinks, and see if your HW errors go down.
I tried CGminer.
Same results?
I tried CGminer. Dont know what MPBM is.
Did you try CGMiner or MPBM?
Got my USB miners from arklan. Need some help.
When I start BFGminer it does not detect my USB miners. I have to do CMD and bfgminer-3.0.2-win64\bfgminer.exe -G -S all and run two applications of BFG miner. One for my singles and another for my USB miners. Is there a way to make BFG miner run all my miners on one application so I dont have to run it twice?
Im seeing stratum from pool 0 requested updates messages more than accepted. What does this mean?
All 10 of my USB miners are running at 600-950 hash. They were advertised to run around 300 hash. Whats up with this?
When I start BFGminer it does not detect my USB miners. I have to do CMD and bfgminer-3.0.2-win64\bfgminer.exe -G -S all and run two applications of BFG miner. One for my singles and another for my USB miners. Is there a way to make BFG miner run all my miners on one application so I dont have to run it twice?
Im seeing stratum from pool 0 requested updates messages more than accepted. What does this mean?
All 10 of my USB miners are running at 600-950 hash. They were advertised to run around 300 hash. Whats up with this?
post some screenshots if you can so we can have more info. if you'd like, we could also do a remote session using http://join.me and could possibly help out MUCH faster. let me know
Got my USB miners from arklan. Need some help.
When I start BFGminer it does not detect my USB miners. I have to do CMD and bfgminer-3.0.2-win64\bfgminer.exe -G -S all and run two applications of BFG miner. One for my singles and another for my USB miners. Is there a way to make BFG miner run all my miners on one application so I dont have to run it twice?
When I start BFGminer it does not detect my USB miners. I have to do CMD and bfgminer-3.0.2-win64\bfgminer.exe -G -S all and run two applications of BFG miner. One for my singles and another for my USB miners. Is there a way to make BFG miner run all my miners on one application so I dont have to run it twice?
Jump to: