Code:
bfgminer.exe -o http://stratum.bitcoin.cz:3333 -O worker:pass -S erupter:all -S antminer:all --set-device antminer:clock=x0981 --icarus-options 115200:2:2 --icarus-timing
Make sure you have the right drivers also.
Topic: USB mining with different brand miners simultaneously? (Read 870 times)
I run 2 BE's and 5 ANT's with this:
Make sure you have the right drivers also.
Make sure you have the right drivers also.
Ok, so I have 1 Antminer (1.6 Gh/s) and 1 Asicminer 333 Mh/s.
I am using bfgminer. I have no problems getting the Antminer U1 to work. However, I can't seem to get the asicminer to recognize, let alone work with the antminer at the same time.
I am using a bat file:
bfgminer.exe -S antminer:all -o stratum.bitcoin.cz:3333 -u xxx -p xxx --set-device antminer:clock=x0781
Can I add in a command to get the the block erupter to also recognize?
If not, should I run a separate version/bat just for the other one?
I am using bfgminer. I have no problems getting the Antminer U1 to work. However, I can't seem to get the asicminer to recognize, let alone work with the antminer at the same time.
I am using a bat file:
bfgminer.exe -S antminer:all -o stratum.bitcoin.cz:3333 -u xxx -p xxx --set-device antminer:clock=x0781
Can I add in a command to get the the block erupter to also recognize?
If not, should I run a separate version/bat just for the other one?
It looks like you're only telling bfgminer to run the antminer, you need to tell it to run both. Not sure how to make the miners run at at start up. I just leave that part out. When I open bfgminer I just hit M, +, all.
Ok, so I have 1 Antminer (1.6 Gh/s) and 1 Asicminer 333 Mh/s.
I am using bfgminer. I have no problems getting the Antminer U1 to work. However, I can't seem to get the asicminer to recognize, let alone work with the antminer at the same time.
I am using a bat file:
bfgminer.exe -S antminer:all -o stratum.bitcoin.cz:3333 -u xxx -p xxx --set-device antminer:clock=x0781
Can I add in a command to get the the block erupter to also recognize?
If not, should I run a separate version/bat just for the other one?
I am using bfgminer. I have no problems getting the Antminer U1 to work. However, I can't seem to get the asicminer to recognize, let alone work with the antminer at the same time.
I am using a bat file:
bfgminer.exe -S antminer:all -o stratum.bitcoin.cz:3333 -u xxx -p xxx --set-device antminer:clock=x0781
Can I add in a command to get the the block erupter to also recognize?
If not, should I run a separate version/bat just for the other one?
If I have a USB hub, and I have 3 different miners, will they all work together? Example:
2 Block Erupter USB - 300 MH/s
1 Antminer 1.6 GH/s
Or do they all have be the same to work together?
I am a bit new, but was just wondering about this.
2 Block Erupter USB - 300 MH/s
1 Antminer 1.6 GH/s
Or do they all have be the same to work together?
I am a bit new, but was just wondering about this.
Yes they do work together.
If I have a USB hub, and I have 3 different miners, will they all work together? Example:
2 Block Erupter USB - 300 MH/s
1 Antminer 1.6 GH/s
Or do they all have be the same to work together?
I am a bit new, but was just wondering about this.
2 Block Erupter USB - 300 MH/s
1 Antminer 1.6 GH/s
Or do they all have be the same to work together?
I am a bit new, but was just wondering about this.
Jump to: