Topic: vega mining scripts share (Read 368 times)
Because of too much overlock in overdriventool
Hello Guys,
Recently I have built 8GPU VEGA mining rig. The rig contains: 5*MSI Radeon RX Vega 64, 8GB+2*Gigabyte Radeon RX Vega 56 8GB+1*Gigabyte Radeon RX Vega 64 Gaming
OC 8GB Video Card.
except the HBM problem, i had another problem when I was mining GRAFT on certain pools. some times, the pool will reject all share with reason "Unauthenticated". please refer to the log below. And the rig will be stuck in this status forever until a reboot.
[23:38:40] GPU2 | 52øC | Fan 4002 RPM | 1927.2 H/s
[23:38:40] GPU0 Found Nonce, submitting...
[23:38:40] !Rejected by pool! Reason: Unauthenticated
To address this, I developed a monitoring powershell scripts to monitor the accpeted shared by pool. if shares are not increased in 2 minute, then the rig will be rebooted.
it works pretty well since it also address another problem i had, some times rig will be doing nothing if one card is not hashing.
I am not a professional powershell developer. This was my first time to use powershell and I developed this script one night with the help of google.
Here is the link for your reference in case you are having same headache.
https://drive.google.com/file/d/1aJCE6kAZawQ_Mi9NQ-JnW0xJtuoqRiSO/view
Recently I have built 8GPU VEGA mining rig. The rig contains: 5*MSI Radeon RX Vega 64, 8GB+2*Gigabyte Radeon RX Vega 56 8GB+1*Gigabyte Radeon RX Vega 64 Gaming
OC 8GB Video Card.
except the HBM problem, i had another problem when I was mining GRAFT on certain pools. some times, the pool will reject all share with reason "Unauthenticated". please refer to the log below. And the rig will be stuck in this status forever until a reboot.
[23:38:40] GPU2 | 52øC | Fan 4002 RPM | 1927.2 H/s
[23:38:40] GPU0 Found Nonce, submitting...
[23:38:40] !Rejected by pool! Reason: Unauthenticated
To address this, I developed a monitoring powershell scripts to monitor the accpeted shared by pool. if shares are not increased in 2 minute, then the rig will be rebooted.
it works pretty well since it also address another problem i had, some times rig will be doing nothing if one card is not hashing.
I am not a professional powershell developer. This was my first time to use powershell and I developed this script one night with the help of google.
Here is the link for your reference in case you are having same headache.
https://drive.google.com/file/d/1aJCE6kAZawQ_Mi9NQ-JnW0xJtuoqRiSO/view
any script for srb miner bro? would be nice if u make 1 . thanks
I have tried that.
It works for me.
Thanks for sharing the scripts.
It works for me.
Thanks for sharing the scripts.
Thanks for the info! Have you ever tried using their official pool?
I tried the US official pool - http://us.pool.graft.network pool. ironically, it is not very stable.
I later tried graft.online. this pool is quite stable and this site's owner also complied the CLI wallet of graft which i am using now.
I chatted him in telegram. He is very helpful.
Thanks for the info! Have you ever tried using their official pool?
for easyhash, i did not have this problem while in easyhash, i cannot monitor each rig's hash rate and there is also no mail alert function.
BTW: Estimate Mining Profits in easyhash is great feature. The result is quite accurate and you can quickly decide which coin to mine.
BTW: Estimate Mining Profits in easyhash is great feature. The result is quite accurate and you can quickly decide which coin to mine.
Thanks mate.
I will try this later.
and by the way, which mining pools you are using now for GRAFT.
Thanks
I will try this later.
and by the way, which mining pools you are using now for GRAFT.
Thanks
I am using these 2 pools
http://graftpool.net fee 0.1%
https://www.graftpool.online fee 1%
The main reason is these 2 pools can send alert mail if the rig is down.
i had that problem once with graftpool.online and just switch to easyhash, never had a problem since.
Thanks mate.
I will try this later.
and by the way, which mining pools you are using now for GRAFT.
Thanks
I will try this later.
and by the way, which mining pools you are using now for GRAFT.
Thanks
I am using these 2 pools
http://graftpool.net fee 0.1%
https://www.graftpool.online fee 1%
The main reason is these 2 pools can send alert mail if the rig is down.
Thanks mate.
I will try this later.
and by the way, which mining pools you are using now for GRAFT.
Thanks
I will try this later.
and by the way, which mining pools you are using now for GRAFT.
Thanks
I'll check this later.
I'm using my phone.
Thanks for sharing
I'm using my phone.
Thanks for sharing
Hello Guys,
Recently I have built 8GPU VEGA mining rig. The rig contains: 5*MSI Radeon RX Vega 64, 8GB+2*Gigabyte Radeon RX Vega 56 8GB+1*Gigabyte Radeon RX Vega 64 Gaming
OC 8GB Video Card.
except the HBM problem, i had another problem when I was mining GRAFT on certain pools. some times, the pool will reject all share with reason "Unauthenticated". please refer to the log below. And the rig will be stuck in this status forever until a reboot.
[23:38:40] GPU2 | 52øC | Fan 4002 RPM | 1927.2 H/s
[23:38:40] GPU0 Found Nonce, submitting...
[23:38:40] !Rejected by pool! Reason: Unauthenticated
To address this, I developed a monitoring powershell scripts to monitor the accpeted shared by pool. if shares are not increased in 2 minute, then the rig will be rebooted.
it works pretty well since it also address another problem i had, some times rig will be doing nothing if one card is not hashing.
I am not a professional powershell developer. This was my first time to use powershell and I developed this script one night with the help of google.
Here is the link for your reference in case you are having same headache.
https://drive.google.com/file/d/1aJCE6kAZawQ_Mi9NQ-JnW0xJtuoqRiSO/view
Recently I have built 8GPU VEGA mining rig. The rig contains: 5*MSI Radeon RX Vega 64, 8GB+2*Gigabyte Radeon RX Vega 56 8GB+1*Gigabyte Radeon RX Vega 64 Gaming
OC 8GB Video Card.
except the HBM problem, i had another problem when I was mining GRAFT on certain pools. some times, the pool will reject all share with reason "Unauthenticated". please refer to the log below. And the rig will be stuck in this status forever until a reboot.
[23:38:40] GPU2 | 52øC | Fan 4002 RPM | 1927.2 H/s
[23:38:40] GPU0 Found Nonce, submitting...
[23:38:40] !Rejected by pool! Reason: Unauthenticated
To address this, I developed a monitoring powershell scripts to monitor the accpeted shared by pool. if shares are not increased in 2 minute, then the rig will be rebooted.
it works pretty well since it also address another problem i had, some times rig will be doing nothing if one card is not hashing.
I am not a professional powershell developer. This was my first time to use powershell and I developed this script one night with the help of google.
Here is the link for your reference in case you are having same headache.
https://drive.google.com/file/d/1aJCE6kAZawQ_Mi9NQ-JnW0xJtuoqRiSO/view
Jump to: