Very very low hash rate on eth 2.000Mh/s

ejzok

jr. member

Activity: 134

Merit: 1

Quote from: BitcoinSupremo on February 04, 2018, 01:19:37 PM

Try your cards in Zcash which should give about 300 sol/s as speed approximately. If your cards do really bad in Zcash too by offering let's say a hashrate of only 100 sol/s then definitely is something wrong with your cards or with your system. Try this to see where your fault is. I always do like this when troubleshooting Nvidia mining rigs.

@Pekine don't write nonsense , blockchain drivers are only available for AMD cards, and the OP has Nvidia cards.

Thanks for advice, will give it a try and report back.

newmz

sr. member

Activity: 372

Merit: 250

The road of excess leads to the palace of wisdom

Another thing you can try is to dump Claymore and use a miner which has a better hash-rate than Claymore on 1060s and has NO FEE.

https://github.com/ethereum-mining/ethminer/releases

I was mining with 4 1060s getting around 92mh/s and this miner gives me 94-95mh/s and doesn't mine any dev fee.

use afterburner to set powerlimit at 65%, core at -200 and memory at +700

Windows 10 has a bad reputation for mining, but I thought that had been fixed with newer drivers - just make sure you download the latest from Nvidia and don't let Windows Update choose the drivers. I use Windows 8.1

Dimedroll

full member

Activity: 154

Merit: 100

Quote from: michalss on February 03, 2018, 09:12:34 AM

Hi all,

Hi not sure what is wrong but with claymore miner im getting only 2Mh/s on etherum.. Win10Entr 4GB Ram. 1060 6gb Asus Dual driver version 390..

Pls Help

Thx Mike

maybe problem with drivers?
you need 384.94
this is very stable version
I use last 3 months and no problem 24/7

BitcoinSupremo

copper member

Activity: 1442

Merit: 529

Try your cards in Zcash which should give about 300 sol/s as speed approximately. If your cards do really bad in Zcash too by offering let's say a hashrate of only 100 sol/s then definitely is something wrong with your cards or with your system. Try this to see where your fault is. I always do like this when troubleshooting Nvidia mining rigs.

@Pekine don't write nonsense , blockchain drivers are only available for AMD cards, and the OP has Nvidia cards.

Pekine

newbie

Activity: 112

Merit: 0

I had exactly the same issue. I did the uninstall and installed the latest blockchain drivers.

For me it fixed the issue.

ejzok

jr. member

Activity: 134

Merit: 1

Quote from: smoolae on February 04, 2018, 06:11:32 AM

Quote from: ejzok on February 04, 2018, 06:00:59 AM

I have the exact problem, using Zotac GTX 970 Elpida ram with only 2~3 MH/s only. I tried with EthOS and got around 16~18MH/s, but I use this computer daily and would really like to solve this problem.

I tried changing "Optimise for Compute Performance" to Yes, like some suggestion on the internet, but that didn't help at all, so I don't know what to do.

Anyone know how to fix ?

Try the same thing I stated above.

Sorry I didn't mention, but that is also a no brainer must try thing...

Playing with Afterburner overclocking, default settings, format Windows and tried from scratch, DDU to fresh install of the driver, all these steps, I already tried.

I think at this hashrate, it's not about the card being underclocking. Out-of-the-box GTX 970 should get around 14-16MH/s. Getting only 2MH/s means something else is incorrect. ><

smoolae

full member

Activity: 602

Merit: 106

Quote from: ejzok on February 04, 2018, 06:00:59 AM

I have the exact problem, using Zotac GTX 970 Elpida ram with only 2~3 MH/s only. I tried with EthOS and got around 16~18MH/s, but I use this computer daily and would really like to solve this problem.

I tried changing "Optimise for Compute Performance" to Yes, like some suggestion on the internet, but that didn't help at all, so I don't know what to do.

Anyone know how to fix ?

Try the same thing I stated above.

ejzok

jr. member

Activity: 134

Merit: 1

I have the exact problem, using Zotac GTX 970 Elpida ram with only 2~3 MH/s only. I tried with EthOS and got around 16~18MH/s, but I use this computer daily and would really like to solve this problem.

I tried changing "Optimise for Compute Performance" to Yes, like some suggestion on the internet, but that didn't help at all, so I don't know what to do.

Anyone know how to fix ?

smoolae

full member

Activity: 602

Merit: 106

Quote from: michalss on February 03, 2018, 09:12:34 AM

Hi all,

Hi not sure what is wrong but with claymore miner im getting only 2Mh/s on etherum.. Win10Entr 4GB Ram. 1060 6gb Asus Dual driver version 390..

Pls Help

Thx Mike

Download MSI Afterburner and overclock your cards. Right now it seems like your GPUs are heavily underclocked.

Also, often something like this might be because of a bad driver(s). Use DDU to clean your drivers and download the latest drivers.

Keep us posted!

0xcosmos

full member

Activity: 585

Merit: 110

what gpus are you using to mine?

michalss

newbie

Activity: 24

Merit: 0

Hi all,

Hi not sure what is wrong but with claymore miner im getting only 2Mh/s on etherum.. Win10Entr 4GB Ram. 1060 6gb Asus Dual driver version 390..

https://s25.postimg.org/4skhaulr3/LLLL.png

Pls Help

Thx Mike

Topic: Very very low hash rate on eth 2.000Mh/s (Read 219 times)