Topic: Volt modded Blades suddenly died? (Read 575 times)
My completely uneducated guess is to reformat and reinstall the hashra controla software... Just based on you changing a setting (causing a write to disk most likely) and a failure immediately after. Sounds like a failed/corrupted write to me.
I hope they haven't...maybe someone with some expertise can help me out.
*edit--lights are flashing on the units, but hashra blade controla does not seem to recognize any units. I get "NaN" for the hashrates, and "loading" for the rejects.
*edit--lights are flashing on the units, but hashra blade controla does not seem to recognize any units. I get "NaN" for the hashrates, and "loading" for the rejects.
Hi All:
I have a weird problem; been running beautifully and effortlessly for two weeks until tonight with three volt-mod blades on hashra blade controla.
Only thing that I changed tonight was I went from 988 down to 963, and now the blades aren't even getting recognized or anything on controla. I have previously switched around speeds without issue.
This sucks-- I always seem to have some sort of problem crop up when the profitability is high (currently 162% LTC on clever).
Help appreciated.
Here's my history:
I have a weird problem; been running beautifully and effortlessly for two weeks until tonight with three volt-mod blades on hashra blade controla.
Only thing that I changed tonight was I went from 988 down to 963, and now the blades aren't even getting recognized or anything on controla. I have previously switched around speeds without issue.
This sucks-- I always seem to have some sort of problem crop up when the profitability is high (currently 162% LTC on clever).
Help appreciated.
Here's my history:
Code:
Jun 14 03:17:04 kernel: [ 5.313714] usb 1-1.2.4.1: Product: STM32 Virtual COM Port
Jun 14 03:17:04 kernel: [ 5.331168] usb 1-1.2.4.1: Manufacturer: STMicroelectronics
Jun 14 03:17:04 kernel: [ 5.338497] usb 1-1.2.4.1: SerialNumber: 48D772613137
Jun 14 03:17:04 kernel: [ 5.362010] cdc_acm 1-1.2.4.1:1.0: This device cannot do calls on its own. It is not a modem.
Jun 14 03:17:04 kernel: [ 5.393721] cdc_acm 1-1.2.4.1:1.0: ttyACM0: USB ACM device
Jun 14 03:17:04 kernel: [ 5.497235] cdc_acm 1-1.2.1:1.0: ttyACM1: USB ACM device
Jun 14 03:17:04 kernel: [ 5.509254] usb 1-1.2.4.2: new full-speed USB device number 10 using dwc_otg
Jun 14 03:17:04 kernel: [ 5.630263] cdc_acm 1-1.2.2:1.0: This device cannot do calls on its own. It is not a modem.
Jun 14 03:17:04 kernel: [ 5.643858] usb 1-1.2.4.2: New USB device found, idVendor=0483, idProduct=5740
Jun 14 03:17:04 kernel: [ 5.653094] usb 1-1.2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 14 03:17:04 kernel: [ 5.676079] usb 1-1.2.4.2: Product: STM32 Virtual COM Port
Jun 14 03:17:04 kernel: [ 5.689102] usb 1-1.2.4.2: Manufacturer: STMicroelectronics
Jun 14 03:17:04 kernel: [ 5.696498] usb 1-1.2.4.2: SerialNumber: 48DD7F6E3135
Jun 14 03:17:04 kernel: [ 5.720098] cdc_acm 1-1.2.4.2:1.0: This device cannot do calls on its own. It is not a modem.
Jun 14 03:17:04 kernel: [ 5.751768] cdc_acm 1-1.2.4.2:1.0: ttyACM2: USB ACM device
Jun 14 03:17:04 kernel: [ 5.869344] usb 1-1.2.4.3: new full-speed USB device number 11 using dwc_otg
Jun 14 03:17:04 kernel: [ 5.886114] cdc_acm 1-1.2.2:1.0: ttyACM3: USB ACM device
Jun 14 03:17:04 kernel: [ 5.973082] cdc_acm 1-1.2.3:1.0: This device cannot do calls on its own. It is not a modem.
Jun 14 03:17:04 kernel: [ 6.002133] usb 1-1.2.4.3: New USB device found, idVendor=0483, idProduct=5740
Jun 14 03:17:04 kernel: [ 6.020301] usb 1-1.2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 14 03:17:04 kernel: [ 6.045302] usb 1-1.2.4.3: Product: STM32 Virtual COM Port
Jun 14 03:17:04 kernel: [ 6.061240] usb 1-1.2.4.3: Manufacturer: STMicroelectronics
Jun 14 03:17:04 kernel: [ 6.068595] usb 1-1.2.4.3: SerialNumber: 48D4836A3135
Jun 14 03:17:04 kernel: [ 6.092820] cdc_acm 1-1.2.4.3:1.0: This device cannot do calls on its own. It is not a modem.
Jun 14 03:17:04 kernel: [ 6.127223] cdc_acm 1-1.2.4.3:1.0: ttyACM5: USB ACM device
Jun 14 03:17:04 kernel: [ 6.201521] cdc_acm 1-1.2.3:1.0: ttyACM4: USB ACM device
Jun 14 03:17:04 kernel: [ 6.380513] usbcore: registered new interface driver cdc_acm
Jun 14 03:17:04 kernel: [ 6.530690] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jun 14 03:17:04 kernel: [ 6.630457] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
Jun 14 03:17:04 kernel: [ 10.744210] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jun 14 03:17:04 kernel: [ 11.214581] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jun 14 03:17:04 kernel: [ 16.662520] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jun 14 03:17:04 kernel: [ 19.371551] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Jun 14 03:17:04 kernel: [ 20.885632] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Jun 14 03:17:07 /usr/sbin/cron[2038]: (CRON) INFO (pidfile fd = 3)
Jun 14 03:17:07 /usr/sbin/cron[2039]: (CRON) STARTUP (fork ok)
Jun 14 03:17:07 /usr/sbin/cron[2039]: (CRON) INFO (Running @reboot jobs)
Jun 14 03:17:08 kernel: [ 27.286417] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS
Jun 14 03:24:21 ntpdate[1912]: step time server 206.108.0.131 offset 426.715767 sec
Jun 14 03:24:21 ifplugd(eth0)[1588]: Program executed successfully.
Jun 14 03:24:30 ntpd[2241]: ntpd [email protected] Fri May 18 20:30:57 UTC 2012 (1)
Jun 14 03:24:30 ntpd[2242]: proto: precision = 1.000 usec
Jun 14 03:24:30 ntpd[2242]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Jun 14 03:24:30 ntpd[2242]: Listen normally on 1 lo 127.0.0.1 UDP 123
Jun 14 03:24:30 ntpd[2242]: Listen normally on 2 eth0 192.168.1.71 UDP 123
Jun 14 03:24:30 ntpd[2242]: peers refreshed
Jun 14 03:24:30 ntpd[2242]: Listening on routing socket on fd #19 for interface updates
Jun 14 03:24:30 ntpd[2242]: restrict: error in address '::' on line 38. Ignoring...
Jun 14 03:24:30 ntpd[2242]: restrict: error in address '::1' on line 42. Ignoring...
Jun 14 03:24:30 ntpd[2242]: format error frequency file /var/lib/ntp/ntp.drift
Jump to: