guys please this was not motherboard issue, it was not dectecting issue, it was that the gpu was not powered at all
i figured out finally what was the problem, basically i used both type 4 and type 3 pcie cables together this was the problem...
Topic: Weird issue with my new rig (Read 165 times)
I run 9 GPU rigs H110 pro BTC with Windows 10 powered by 2 PSU. I had few GPU detection problems in the past but most of them are due to either raiser issue or solved after a windows reboot. I also run a 2 rigs with 12 GPU each with ETHOS. no issues till now. All are GTX 1070s
i'm building a new 13 gpu rig with the h110 pro btc, everything work fine with 5 gpu, i've added thge six one and it's not powering up at all, i tried the gpu on another system and it work fine, so it's not the gpu
i used another pciè cables and i still have this issue, i can't really grasp my head around this...
i used another pciè cables and i still have this issue, i can't really grasp my head around this...
+ swap the cards around
and/or
+ put card #6 in a different machine
. . . to verify it is good
already did it's good
really weird stuff here, basically this gpu do not work here but work on the other system fucking weird, i removed all gpu and this one still not working
so one can think about this gpu being bad, but this same gpu work on another rig
.
.
.
lol finally it working now, really no-sense never seen this thing before...now it's freezing...
i'm building a new 13 gpu rig with the h110 pro btc, everything work fine with 5 gpu, i've added thge six one and it's not powering up at all, i tried the gpu on another system and it work fine, so it's not the gpu
i used another pciè cables and i still have this issue, i can't really grasp my head around this...
i used another pciè cables and i still have this issue, i can't really grasp my head around this...
+ swap the cards around
and/or
+ put card #6 in a different machine
. . . to verify it is good
How many psu you have?
1 ax1600i, i think the problem is the psu it's defective i suppose
How many psu you have?
I run 13 RX 580 on the ASRock H110 Pro BTC+ with USB 6-pin powered risers in Windows 10 v1709. I guess you're not using powered risers? If so you need to plug in the two 4-pin molex PCI-E supplemental power on the motherboard.
i've already did that, all my other rig are working fine with 6 gpu without power risers, it's something to do with the psu here
I run 13 RX 580 on the ASRock H110 Pro BTC+ with USB 6-pin powered risers in Windows 10 v1709. I guess you're not using powered risers? If so you need to plug in the two 4-pin molex PCI-E supplemental power on the motherboard.
i tried what you said but nothing changed, the six card is not receiving power, the led is off
this motherboard can clearly support more than 5 gpu...something wrong here
wait i think i did not explin myself well, it's not the motherboard the issue here, the psu don't power the gpu at all that's the problem, even if i'm not connecting it to the motherboard...
weird thing is that this gpu work in another system
this motherboard can clearly support more than 5 gpu...something wrong here
wait i think i did not explin myself well, it's not the motherboard the issue here, the psu don't power the gpu at all that's the problem, even if i'm not connecting it to the motherboard...
weird thing is that this gpu work in another system
I never tried running 6 cards on the H110, so I'm not sure. However the H110 chipset only supports 6 native PCI-E lanes. The rest of the slots are through a PCI-E expansion chip, so that may have something to do with it.
Without being an expert in building rigs - we are hosting them for clients - my experience shows that 12 or 13 cards rigs work best on EthOS or SimpleMining.
Make sure Windows is installed in UEFI mode and 'Above 4GB MMIO BIOS assignment' is enabled in the Bios under 'Advanced' ==> 'Chipset Configuration'. I also set all the PCI-E Link Speed to GEN2 from Auto.
is this needed for 6 card? it's weird i'n not even on the 7 card here...
Make sure Windows is installed in UEFI mode and 'Above 4GB MMIO BIOS assignment' is enabled in the Bios under 'Advanced' ==> 'Chipset Configuration'. I also set all the PCI-E Link Speed to GEN2 from Auto.
i'm building a new 13 gpu rig with the h110 pro btc, everything work fine with 5 gpu, i've added the six one and it's not powering up at all, i tried the gpu on another system and it work fine, so it's not the gpu
i used another pcie cables and i still have this issue, i can't really grasp my head around this...
i used another pcie cables and i still have this issue, i can't really grasp my head around this...
Jump to: