Weird problem with my mining RIG | Bitcointalksearch.org

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: murgorx on July 10, 2020, 12:44:34 PM

Okayyy guys, looks like one of the GPU's is failing me :

https://imgur.com/a/brqy7Fz

I tripple-checked and restarted the rig a couple of times, just to make sure it's on compute mode...
What does that tell you?

Mining with 1/3 of it's capabilities?

Br/kr
Murgor

yeah... my suggestion would be verify it's on compute mode. I've had cards switch to gaming when doing updates. Also, switch risers with another card to see if the problem follows it.

murgorx

member

Activity: 443

Merit: 13

Thanks a lot for the help, guys!
I will check the riser, think i have one spare left and soon ill order another batch of 6. Grin

rdluffy

legendary

Activity: 2366

Merit: 1408

Quote from: gt_addict on July 10, 2020, 02:16:56 PM

One of mine used to do that. Turned out to be a failing riser card.

Probably a riser issue
Risers are the most problematic part of the rig, it's wise to have some spare risers
So, test with another rise, and double check if the power cable are connected to card and riser

gt_addict

hero member

Activity: 2534

Merit: 623

Quote from: murgorx on July 10, 2020, 12:44:34 PM

Okayyy guys, looks like one of the GPU's is failing me :

https://imgur.com/a/brqy7Fz

I tripple-checked and restarted the rig a couple of times, just to make sure it's on compute mode...
What does that tell you?

Mining with 1/3 of it's capabilities?

Br/kr
Murgor

One of mine used to do that. Turned out to be a failing riser card.

murgorx

member

Activity: 443

Merit: 13

Okayyy guys, looks like one of the GPU's is failing me :

https://imgur.com/a/brqy7Fz

I tripple-checked and restarted the rig a couple of times, just to make sure it's on compute mode...
What does that tell you?

Mining with 1/3 of it's capabilities?

Br/kr
Murgor

murgorx

member

Activity: 443

Merit: 13

Okay, as of now, the rig is still working like it was 2 weeks ago... Huh

I've got no idea what's currently going on with this system, but thank God it's working again and I do not have to search for parts and do any HW replacements, as I am thinking of expanding with another rig before X-Mas.

Thanks for the suggestions all <3 big love

murgorx

member

Activity: 443

Merit: 13

Okay guys, just got back my configuration from a service.

They callled me this morning to report, that everything is powering up normally.
I just tested that and it boots to windows, but I've got all of the GPUs and riser boards disconnected.

I will now try to connect them one by one to isolate the problem and will update you:D

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: JayDDee on July 09, 2020, 12:55:57 PM

Quote from: philipma1957 on July 09, 2020, 11:09:10 AM

If you are a miner. The psu tester is only 13 usd maybe 14. You really should own one.

Just to be clear a PSU tester is nothing fancy, it's just a jumper for the ATX connector that bypasses the
mobo's power control. The're also used in multi PSU rigs to force the secondary PSU to power on.
Some PSUs come with one.

Another troubleshooting technique is the smell test. That burnt smell is unmistakeable.

I hate that burnt smell... i'm so attuned to it that i start running around the house in a panic when ever i smell that acidic electronic smell.

JayDDee

full member

Activity: 1424

Merit: 225

Quote from: philipma1957 on July 09, 2020, 11:09:10 AM

If you are a miner. The psu tester is only 13 usd maybe 14. You really should own one.

Just to be clear a PSU tester is nothing fancy, it's just a jumper for the ATX connector that bypasses the
mobo's power control. The're also used in multi PSU rigs to force the secondary PSU to power on.
Some PSUs come with one.

Another troubleshooting technique is the smell test. That burnt smell is unmistakeable.

philipma1957

legendary

Activity: 4326

Merit: 8899

'The right to privacy matters'

Quote from: rdluffy on July 09, 2020, 07:30:54 AM

Quote from: valjean on July 09, 2020, 06:59:51 AM

Hi Everyone, on one of my Rig after powerloss I get the same problem. I usually just have to clear CMOS and everything get back to normal

philipma1957 and JayDDee already said it's probably a PSU related problem and I agree

I never had any problem with PSU in my rigs, but a couple of times in my gaming PC, and I know it's not easy to find, because it's not only a single issue, sometimes the PSU dies completely, but a few times PSU acts weird, with problems in the 12v line, or the 5v line, or it works only with a certain load, and the right thing to do is test another PSU
If you don't have a spare PSU, try to find a friend and test for you

If you are a miner. The psu tester is only 13 usd maybe 14. You really should own one.

Also owning a cheap piece of shit psu. Can test mobo boot drive ram and One card.

there are a lot of psu that come to mind. I will link one.

rdluffy

legendary

Activity: 2366

Merit: 1408

Quote from: valjean on July 09, 2020, 06:59:51 AM

Hi Everyone, on one of my Rig after powerloss I get the same problem. I usually just have to clear CMOS and everything get back to normal

philipma1957 and JayDDee already said it's probably a PSU related problem and I agree

I never had any problem with PSU in my rigs, but a couple of times in my gaming PC, and I know it's not easy to find, because it's not only a single issue, sometimes the PSU dies completely, but a few times PSU acts weird, with problems in the 12v line, or the 5v line, or it works only with a certain load, and the right thing to do is test another PSU
If you don't have a spare PSU, try to find a friend and test for you

valjean

newbie

Activity: 18

Merit: 0

Hi Everyone, on one of my Rig after powerloss I get the same problem. I usually just have to clear CMOS and everything get back to normal

JayDDee

full member

Activity: 1424

Merit: 225

Remove the SSD too. It's not about booting, it's not even about the BIOS.
It's about power.

It's either a faulty PSU, a faulty mobo or, less likely, a short somewhere else that's tripping the PSU.

I already suggested how to proceed.

philipma1957

legendary

Activity: 4326

Merit: 8899

'The right to privacy matters'

what is your psu's make and model?

you should own this item

https://www.amazon.com/Computer-PC-Tester-Connectors-Enclosure/dp/B076CLNPPK/ref=sr_1_1_sspa?

cheap and test your psu fast

I ask what psu you own as many will burn up and die mining.

Some atx psu's do not like to do 80% of rating 24/7/365

gt_addict

hero member

Activity: 2534

Merit: 623

Unplug all your cards (including their power cables). Leave just cpu, one stick of ram and ssd plugged in(including sata power, 24 pin and EPS connectors). Then try and power it on. IF it powers on then resintall one gpu at a time and let it run for a bit then shutdown (properly) and install the next card. Keep going until you hopefully find the problem.

murgorx

member

Activity: 443

Merit: 13

Hi JayDDee,

I disconnected everything, leaving only the PSU, RAM and CPU + the SSD storage, but it continues to fail to start up.

I even tried plugging the rig into another socket, just because I thought, that the power strip might have gone bad, but nada...

The mobo is emitting a green light, doesn't seem like it's having a problem...?

EDIT: the pwr_on diode is emitting the green light...

JayDDee

full member

Activity: 1424

Merit: 225

Quote from: murgorx on July 08, 2020, 09:40:07 AM

I tried to get a ram stick from my older computer, but it's a DDR2 memory and doesn't fit on the mainboard... I have tried to power it up without having any gpu's connected to the mainboard and it still the same..

That's bad news. Here are some tips to help isolate the problem.

1. Check all connections.

2. Remove 1 RAM stick at a time if you don't have a substitute.

3. Remove everything not critical to POST including all storage and boot device.

4. Try another PSU.

If it still won't power on it's the mobo or CPU.

murgorx

member

Activity: 443

Merit: 13

Hey guys,

thank you for the responses. I 've been a bit busy and didn't have much time to check out my rig, honestly, I didn't want the additional stress of finding out that some part of my rig is broken and needs replacement...

So today I managed to check it and found something strange - the rig still doesnt power up, even if I cleaned the ram stick and the slots on the mainboard (also used canned air to remove dust balls), but the machine continues to just turn it's lights on and then goes off instantly.

When I unplug the power cable from the power supply, the rig does not have any electricity to it right? But I saw on a couple of occasions, that I turns up and spins the PSU and some of the cards for just a second and then the usual power off...

What is this telling you?

I tried to get a ram stick from my older computer, but it's a DDR2 memory and doesn't fit on the mainboard... I have tried to power it up without having any gpu's connected to the mainboard and it still the same..

rdluffy

legendary

Activity: 2366

Merit: 1408

Do you have another rig or spare parts to test?

Do as others said, clean the memory stick and try again (clean with isopropyl alcohol 99% or with an eraser)

If the problem persists, you'll have to test the entire rig, try to start with only the basic, one GPU, another ram stick if you have, another PSU
if the temperature has reached a very high level, it may have damaged some part

rikuu

jr. member

Activity: 102

Merit: 2

Quote from: bigassboy on June 30, 2020, 06:03:41 AM

take out the memory ram and clean it or try with another working unit.

+1

Those symptoms are usually related to memory.

bigassboy

sr. member

Activity: 373

Merit: 254

take out the memory ram and clean it or try with another working unit.

murgorx

member

Activity: 443

Merit: 13

Hi guys,

last weekend I tortured myself and my rig with the regular AMD driver updates, which after 3 hours or nonstop restarting I managed to configure.

Yesterday, due to the high temps I shutdown the rig and since then I cannot turn it back on?!

When I push the little button on the PSU from 0 to 1, the rig immediately receives electricity, powers up the cards and the CPU, but in less than a second it shutdowns.
I tried switching the PCI slots on the mainboard, because I thought maybe they may have caused this problem to occur, but the rig still continues to do the same thing, as if it is in a weird loop and it reboots itself every 4-5 seconds...
No sound indication like broken RAM memory or something like it.

Has someone experienced something like this? I literally tried powering this thing on like 10+ times, but now I would like to know how to troubleshoot it and fix it...

Thank you for your time. <3

Topic: Weird problem with my mining RIG (Read 307 times)