I had this problem before" like a long time ago", unfortunately, "3 boots" didn't fix it, I sadly had to install the custom firmware and disabled fan check, in my case, however, the fan was spinning just fine but the reading was bad.
What you could try:
1- A hard reset and different stock firmware.
2- Custom firmware.
3- A new control board.
The third one will sure fix it, but not sure if it's worth it.
Topic: Weird T17 Fan (Read 76 times)
I had this bug with some of my bitmain l3+
I booted three times in a row.
It went away. I have seen weird fan action on s9s the fans ramp up ramp down. wont go fast.
yet test on other controllers they work.
I think the three software boots 🥾 in a row clears shit from the cache.
I booted three times in a row.
It went away. I have seen weird fan action on s9s the fans ramp up ramp down. wont go fast.
yet test on other controllers they work.
I think the three software boots 🥾 in a row clears shit from the cache.
I have one fan that won't spin up over 1800 rpm.
On 100% I get
fan1 = 5860
fan 2 = 5840
fan 3 = 1800
fan 4 = 5880
I switched the fan for a new one, still 1800. I swapped the leads at the control board for fan 2 and fan 3 and now fan 2 is 1800. Seems like where the fan plugs into the control board maybe be wonky. Anyone else ever see this? I checked using a piece of paper and the one fan does seem to "suck" less.
On 100% I get
fan1 = 5860
fan 2 = 5840
fan 3 = 1800
fan 4 = 5880
I switched the fan for a new one, still 1800. I swapped the leads at the control board for fan 2 and fan 3 and now fan 2 is 1800. Seems like where the fan plugs into the control board maybe be wonky. Anyone else ever see this? I checked using a piece of paper and the one fan does seem to "suck" less.
Jump to: