I still got a few of these GPUs laying around.
They were actually used to mine BTC... then LTC ... then Darkcoin (X11) .... then ETH ... then ZEC .... now XMR
Basically the profitability is equal between ZEC and XMR but XMR consumes much less power. You can undervolt all the way to 0.95V and use 1000/1500 clocks and you should get almost 600 H/S while using like 125 Watts of power. With ZEC you would use closer to 200 Watts.
I remember first mining ETH with this GPU. The hashrate was like 27MH/s but due to the bug thrashing, it quickly and quickly became slower and slower.
Topic: what can i mine with a Amd 7970 (Read 2011 times)
Equihash: ZEN, ZCL, ZEC, HUSH...
Dagger-hashimoto: MSC, EXP, UBQ...
Dual mining: MSC/EXP/UBQ... + SIA/PASC/PASL/DCR...
At some point I was mining MSC solo + SIA on pool. Tahiti came back to live in August of 2015, one 7970=3x750ti=30MH back then.
There are also some other profitable mining options but try these combinations first.
Dagger-hashimoto: MSC, EXP, UBQ...
Dual mining: MSC/EXP/UBQ... + SIA/PASC/PASL/DCR...
At some point I was mining MSC solo + SIA on pool. Tahiti came back to live in August of 2015, one 7970=3x750ti=30MH back then.
There are also some other profitable mining options but try these combinations first.
ZEC, or join the dark side and come to GRC via the Milkyway BOINC project (Tahiti chips are VERY good for DP Floating Point work which Milkyway needs).
Tahiti was never a good ETH choice except when you didn't have any other profitable alternatives.
R9 280x hasn't been capable of ETH mining at more than about 15-16 Mh/s for well over a year now.
Tahiti was never a good ETH choice except when you didn't have any other profitable alternatives.
R9 280x hasn't been capable of ETH mining at more than about 15-16 Mh/s for well over a year now.
thank you all for the advices, i will try and tell how it worked
Stick to Zcash, best profitability with Tahiti chips, especially if you have cheap electricity.
They adviced me to mine a coin with a smaller DAC, to have a better mining profit, but i don´t know wich one.
On the other side i saw people with r280x that can obtain 25 Mhs with their gpus, but i don´t know where is the difference.
I´m buying Rx570 gpu to mine, but i want to use the ones i have, if that can be done.
Thank you
On the other side i saw people with r280x that can obtain 25 Mhs with their gpus, but i don´t know where is the difference.
I´m buying Rx570 gpu to mine, but i want to use the ones i have, if that can be done.
Thank you
That advice was 100% correct for Tahiti cards.
Mining an ETH-based altcoin (MusicCoin, Ubiq, EXP) that was launched more recently means the DAG size is smaller, and thus postpones the TLB thrashing issue that caused 7970/280 on ETH to slow from ~26mh to ~14mh over the past year and a half.
ZEC is also a good option.
They adviced me to mine a coin with a smaller DAC, to have a better mining profit, but i don´t know wich one.
On the other side i saw people with r280x that can obtain 25 Mhs with their gpus, but i don´t know where is the difference.
I´m buying Rx570 gpu to mine, but i want to use the ones i have, if that can be done.
Thank you
On the other side i saw people with r280x that can obtain 25 Mhs with their gpus, but i don´t know where is the difference.
I´m buying Rx570 gpu to mine, but i want to use the ones i have, if that can be done.
Thank you
Your card's memory controller is actually the problem - as the DAG grows, even though it can fit it in its RAM, it gets slower and slower at random access. This does not occur with GCN 2 and newer GPUs.
That's why 79xx are DAG size sensitive.
They are still good on some algo like equihash
Ah, I did not know this. Thanks for the clarification!
They adviced me to mine a coin with a smaller DAC, to have a better mining profit, but i don´t know wich one.
On the other side i saw people with r280x that can obtain 25 Mhs with their gpus, but i don´t know where is the difference.
I´m buying Rx570 gpu to mine, but i want to use the ones i have, if that can be done.
Thank you
On the other side i saw people with r280x that can obtain 25 Mhs with their gpus, but i don´t know where is the difference.
I´m buying Rx570 gpu to mine, but i want to use the ones i have, if that can be done.
Thank you
Your card's memory controller is actually the problem - as the DAG grows, even though it can fit it in its RAM, it gets slower and slower at random access. This does not occur with GCN 2 and newer GPUs.
That's why 79xx are DAG size sensitive.
They are still good on some algo like equihash
At some point 3GB cards won't be able to mine Ethereum, but it still can. It won't affect the hash rates.
After that, you can mine some other coins with smaller DAGs.
After that, you can mine some other coins with smaller DAGs.
They adviced me to mine a coin with a smaller DAC, to have a better mining profit, but i don´t know wich one.
On the other side i saw people with r280x that can obtain 25 Mhs with their gpus, but i don´t know where is the difference.
I´m buying Rx570 gpu to mine, but i want to use the ones i have, if that can be done.
Thank you
On the other side i saw people with r280x that can obtain 25 Mhs with their gpus, but i don´t know where is the difference.
I´m buying Rx570 gpu to mine, but i want to use the ones i have, if that can be done.
Thank you
Mining a different coin won't give you a better hash rate; it's the card that has the low hash rate.
14mh/s sounds about right. You'll need a better card if you want higher mh/s.
14mh/s sounds about right. You'll need a better card if you want higher mh/s.
Hello, i have a Amd 7970 3gb vram gpu, i mine eth but only generates 14 mh/s, what can i mine with this gpu and get good hashrate?
Thank you for the help
Thank you for the help
Jump to: